K H 9550 Kitty Sill EZ Mount Scratcher Instructions
- June 6, 2024
- K H
Table of Contents
K H 9550 Kitty Sill EZ Mount Scratcher
- Using glass cleaner, thoroughly clean and dry the window that will accommodate the Kitty Sill – EZ Mount Scratcher™.
- Clean each suction cup to ensure proper adhesion to window.
- Holding the platform with the suction cups already attached, gently push one suction cup against the window. See Figure 1.
- Level the platform and gently push the second suction cup against the window. See Figure 2.
- With fingers, push remaining air out of suction cups to ensure a proper adhesion.
- Align each support strap and adhere the suction cups to the window taking care to keep similar tension on each strap. See Figure 3.
Caution: As with any suction cup, debris, temperature changes, sunshine and excessive use can weaken the holding power. We recommend removing the suction cups at least once per month to clean the window area, clean the suction cups and then re-install them for optimal strength.
To operate blinds, curtains & windows:
To operate blinds, curtains and window coverings with Kitty Sill attached, simply flip your new Kitty Sill up against window. Run straps back through the holes in the corners to support the platform in the upright position. Blinds can now operate normally.
REFILL CARDBOARD SCRATCHERS CAN BE PURCHASED AT PARTICIPATING RETAILERS
K &H Manufacturing, LLC
Colorado Springs, CO www.khmfg.com
Made in China | Fabriqué en Chine
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>