K H 22654364 Thermal Bowl Lectro-Temp Control Instructions
- June 6, 2024
- K H
Table of Contents
Care & Instructions
Thank you for purchasing K&H Manufacturing’s Thermal Bow1TM. When used correctly, your Thermal BOw1TM should provide years of ice-free water.
USE & CARE INSTRUCTIONS
Read all instructions carefully. This is an electrical product, pay special
care to IMPORTANT SAFEGUARDS.
DIRECTIONS FOR USE:
Plugin your Thermal-BowITm into a properly grounded outlet. Fill your
Thermal-BowITm with water.
DIRECTIONS FOR CLEANING:
DO NOT immerse your Thermal-BowITm in water or other liquids when cleaning.
Wipe your ThermalBowIn” inside and out with a damp cloth. A mild detergent
may be used but be sure all detergent has been removed before watering your
pet or wildlife.
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed including the following:
- Read all instructions.
- To protect against electrical hazards, DO NOT immerse cord, plug or appliance in water or other liquid.
- Close supervision is necessary when used by or near children.
- Inspect cord before using. If the cord is damaged do not use it.
- ALWAYS unplug from the outlet when not in use.
- DO NOT operate any electrical appliance with a damaged cord or plug, or if the appliance malfunctions or has been damaged in any manner. RETURN all malfunctioning appliances to the factory for examination.
- DO NOT use an appliance anything other than its intended use.
- DO NOT PUNCTURE THE HEATER FOR ANY REASON.
- For use with 110-120 volt AC ONLY. SAVE THESE INSTRUCTIONS FOR YOUR USE.
K&H Limited One Year Warranty
Our warranty is as follows: K&H Manufacturing warrants to the original
consumer. that this product will be free of defects and workmanship for a
period of one year from the date of purchase. The manufacturer’s liability
hereunder is limited to the replacement of the product. This warranty is void
if the product has been damaged by accident, unreasonable use. neglect.
tampering, or other causes not arising from defects in material or
workmanship.
To exercise your warranty: If during the warranty period, your product
malfunctions, return it to the place of purchase with your original purchase
receipt. If this cannot be done. return the product, postage prepaid. to K&H
Manufacturing. with dated proof of purchase or original date receipt. A return
authorization number, obtained by calling
719-591-6950 must accompany all returns
to the manufacturer. Please include a note explaining the problem when
returning the product.
Made in China
K&H Manufacturing, LLC
Colorado Springs, CO
www.khmfg.com
|877-738-5188
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>