JVC XS-S5221PB Portable Bluetooth Speaker User Manual
- June 6, 2024
- JVC
Table of Contents
JVC XS-S5221PB Portable Bluetooth Speaker User Manual
IMPORTANT
- Before first use, charge for -6 hours.
- Check that you have all of the following items.
- If any item is missing, please contact the customer service hotline for assistance. The hotline number is printed on the cover page of this user manual.
UNPACKING
- JVC Rove
- Power Cable
- User Manual (with Warranty Statement)
- Mic/Guitar Adapter (6.5mm to 5mm)
IMPORTANT SAFETY INSTRUCTIONS
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADE SCAN BE FULLY INSERTED TO PREV- ENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOIST.
The lightning flash with arrow- head symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated ‘dangerous voltage’ within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR
BACK), NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
-
READ INSTRUCTIONS – All the safety and operating instructions should be read before the product is operated.
-
RETAIN INSTRUCTION8 -The safety and operating instructions should be retained for future
-
HEED WARNINGS – All warnings on the product and in the operating instructions should be adhered to.
-
FOLLOW INSTRUCTIONS – All operating and use instructions should be
-
CLEANING – Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Clean only with a dry cloth.
-
ATTACHMENTS – Do not use attachments not recommended by the product manufacturer as they may cause
-
ACCESSORIES – Do not place this product on an unstable can, stand, tripod, bracket, or table.The product may fall, causing serious injury to a child or adult, and serious damage to the product.Use only. with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product.Any mounting of the product should follow the manufacturer instructions, and should use a mounting accessory recommended by the manufacturer. A product and cart combination should be moved care-quick stops,excessive force and uneven surfaces may cause the product and cart combination to overturn.
-
VENTILATION- Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should not be placed in a built-in installation, such as a bookcase or rack, unless proper ventilation is provided or the manufacturer” instructions have been adhered to.
-
POWER SOURCES – This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions.
-
GROUNDING OR POLARIZATION – This product may be equipped with a polarized alternating-current line plug(a plug having one blade wider than the other).This plug will fit into the power outlet only one This is a safety feature: If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.
-
POWER-CORD PROTECTION – Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point of exit from the product.
-
NON-HOUSE PERIODS – The power cord of the product should be unplugged from the outlet when left unused for long periods of time.
-
Do not use this apparatus near water.
-
Do not install near any heat sources such as rad ators, heat reg sters, stoves or other apparatus (including amplifiers) that produce heat.
-
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power – supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
-
Battery shall not be exposed to excessive heat such as sunshine, fire or the like. Mains plug is used as disconnect device and it should remain readily operable during intended In order to disconnect the apparatus from the mains completely, the mains plug should be disoonnected fi:am the mains socket outlet completely.
-
Battery shall not be exposed to excessive heat such as sunshine, fire or the like.
WARNING
To reduce the risk of fire or electric shock, do not expose this apparatus to
rain or moisture.
CAUTlON
Use of controls or adjustments or perfomanoe of procedures other than those
specified may result in hazardous radiation exposure.
CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.
CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
- Please ensure unit is facing upright when charging. Do not charge with unit laying down on sides or back
- Please charge the unit after use (after electric discharge or when indicating low battery) immediately.
- Please ensure to charge unit once every two weeks if unit is not being used, as to avoid battery losing permeant charge.
- Unit contains a Lead Acid battery: Lead acid batteries are usually filled with an electrolyte solution containing sulphuric add. This is a very corrosive chemical (pH<2) which can permanently damage the eyes and produce serious chemical bums to the skin. If there is a spill from the battery do not try to open the unit or replace the battery, please call customer service (1-888-582-8870).
- Battery is not replaceable, please do not open unit to replace battery, call customer service (1-888-582-8870).
- To dispose of unit please contact your local e-waste center.
Bluetooth
The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. Bluetooth® and any use of such marks by AcoustMax International Co., Ltd. is under license. Other trademarks and trade names are those of their respective owners.
PARTS DESCRIPTION
- Handle
- AC connection input
- Mic/Guitar Volume Control
- LED Interface
- Mic/Guitar Port
- USB Port
- Aux Input
- Power On/Off
- Source Select
- Bluetooth Pairing Key
- Battery Level Indicator
- Radio Preset
- Volume Knob
- TWS
- Mic/Guitar Switch
Getting Started
Power Connection
Wall Outlet
- Connect the supplied AC cable to the speaker
- Plug the AC cord into wall outlet.
Turn Power Switch On
Power On/Off Switch
- Press the Power switch to “ON” position on top panel of speaker
- The Power Red LED will turn On.
- The unit will enter into Bluetooth mode, Bluetooth LED will flash blue.
- If the 3.5mm Stereo Audio cable is plugged in during this Power On mode.
Charging Battery
-
By connecting AC power, battery will start charging
-
Charge battery about 6 hours in Power off mode before you start using the unit for the first time
-
Battery status by pushing battery button. 100,75,50,25 and battery low on LED display when press battery button.
-
The Red Power LED will pulse off and on during battery charging.
-
The RED power LED will turn solid when fully charged.
-
To charge, Please open rubber cover for power port to input power cable
-
When not charging, please ensure rubber cover is closed.
Connection using AUX input
- Press the Source button until “Aux” mode is displayed on LED screen
- Plug in the 3.5mm Stereo Audio wire into the Aux-In input.
- You can connect any audio device that has 3.5mm audio output jack, and can playback any audio from this connected device.
- All playback functions (Play, Pause, Next, Previous, Volume Up & Volume Down) can be controlled from the connected Audio device.
Connect Microphone
Connect Microphone
- First plug the supplied “Mic/Guitar” adapter (6.5mm to 3.5mm) to the input labeled “MIC/Guitar” above the Volume knob
- Once the microphone is plugged in select the “MIC/Guitar” button to Mic position
- Now control your microphone volume on the smaller knob on the far left of the dashboard of the speaker
*Make sure your microphone is also switched to “On”
FCC Warning Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Supplier’s Declaration of Conformity
Model No. XS-S521 PB
Trade: JVC
Responsible Party: Russell Distribution Company
Address: 7801 Hayvenhurst Avenue, Van Nuys, Ca 91406 USA Telephone No.
888-582-8870
Contact Information: https://jvcproducts.com