ROVE RV03000 Fast Wireless Charging Pad User Manual

: June 6, 2024
: ROVE

Table of Contents

ROVE RV03000 Fast Wireless Charging Pad
Package Contents
Device Layout
Indicator Light Identification
Using the Wireless Charger
Specifications
FCC Statement
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ROVE RV03000 Fast Wireless Charging Pad

ROVE RV03000 Fast Wireless Charging Pad fig 1

Wireless Charger User Manual
RV03000

Thanks for choosing ROVE!
This Fast Wireless Charging Pad allows you to enjoy the freedom and convenience of wireless charging. Simply place your phone on the center of the pad to begin charging. Please read this manual before using the device to ensure safe and proper use.

Getting Started

Package Contents

Wireless Charger
Charging Cable

Wireless charging covers and chargers sold separately.

Device Layout

ROVE RV03000 Fast Wireless Charging Pad fig 2

Indicator Light Identification

Color Status
Solid Amber Standby
Solid Green Charging

Using the Wireless Charger

ROVE RV03000 Fast Wireless Charging Pad fig 3

Connect the micro cable (included) to the charging pad and your charger adapter (not included). When the LED lights up amber it is ready for charging.
Place your phone down on the center of the charging pad.
When the phone is properly aligned, the LED light will change to green. Your phone is now charging.

Notes:

Fast charge mode is compatible with any phone that can receive 10W input.
Standard Qi enabled devices will charge at a standard speed, such as iPhone 8/8plus, iPhone X.
Phones without standard Qi function need an additional Qi wireless receiver
(not included). It is normal for your phone to get warm during the charging process, removing a phone case is recommended while charging.

Specifications

Output: 5V/2A,9V/1.1A MAX
Conversion: >72%
Input: 5V/2A;9V/1.8A Receiving
distance: 4~10mm
Frequency:113.7kHz ~ 136.8kHz
Size: 100*100mm N.W.: 51g

Can cause damage to the device Can cause bodily hard to user or another person.

Do not squeeze or collide with other items.
Do not disassemble or throw into fire or water, to avoid causing a short circuit leakage.
Do not use wireless charger in severely hot, wet, or corrosive environments, to avoid circuit damage and leakage phenomenon.
Do not place close to magnetic strip or chip card (ID card,
bank cards, etc.) to avoid magnetic failure.
Please keep an 8-inch distance between embedding medical devices
(pacemakers, embedding cochlear, etc.) and the wireless charger, to avoid potential interference with the medical device.
Do not block charging fan on bottom of the wireless charger.
Do not place materials such as metals, magnets, or magnetic stripes between the mobile device and the wireless charger.
Please advise children this charger is not a toy.

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.