Baseus WXYL-01 Wireless Charger Gravity Car Mount User Manual
- June 6, 2024
- Baseus
Table of Contents
WXYL-01 Wireless Charger Gravity Car Mount
User Manual
Please read this user manual completely and keep it property
Product introduction:
Thank you for choosing Bases products. This is a gravity linkage car mount holder with wireless charging. Please read the manual carefully before using the product and keep it with proper care for future reference
Product parameters
Name: Baseus Wireless Charger Gravity Car Mount Model: WXYL-01 Material: ABS Process: Injection molding Input: 5V=2A19V=2A (It is recommended to use with QC2.0/QC3.0 adapters) Output: lOW (Max) Install way: Clamping type Fixed position: Air outlet Suitable for: Mobile phones with wireless charging function (4.0-6.5 inch) Working temperature: 0-35°C
Product list
Product parameters
Instructions for use
5.1 Select an appropriate location on an air vent to fix the holder.
5.2 Connect the data cable to power on, and put the phone on it.
Instructions on Indicator Lights
LED lights Power on through the data cable and the pure green LED light turns
0n, lt flashes 2times and goes out, the input power detection,about2-3seconds
after entering the standby state; When the sensor to the wireless charging
device, the pure green tED lights 0p, he solid green LED turns off when the
device sends a data signal of full charge;
The solid green flashes when a metal foreign object [FOD)is detected
Precaution
7.1 When using the wireless charger to charge a phone, the surface temperature
of the phone will increase to a certain extent, which is a normal phenomenon
and will not affect the service life and performance of the device. 7.2 When
using this product, please use an adapter with an output voltage of 5V-2A, 9V—
2A, or a fast-charging adapter. 7.3 Do not place metal objects on the contact
surface during charging, such as iron pieces, rings, metal protective shells,
etc. 7.4 This product has input overcurrent and overvoltage protection.
Improper use will cause shutdown or reduction of output power, please check
whether the equipment is used abnormally or improperly. 7.5 Please use the
product at the ambient temperature of 0-35°C. Do not expose it to the sun, and
use it in damp, dirty, and hot environments. Do not put the product in water,
fire, too high (>40°C) and too low temperature (<-20°C) environment, and keep
it away from children. 7.6 Please clean the surface with a dry and soft cloth,
and do not use chemicals, soap, or detergents to clean the product. 7.7 Do not
disassemble, modify or repair the wireless charger by yourself.
7.8 Do not place magnetic stripe cards (including credit cards, passbooks, and
registration cards) close to the device being charged to avoid the magnetic
stripe being damaged by the magnetic field generated by the device. 7.9 The
improper use of this product by users may lead to a decrease of the service
life or damage, and the results due to improper use is neither covered in the
warranty nor the responsibility of the manufacturer. Thank you for your phone
cards, bank understanding.
Declaration on Toxic or hazardous substances and elements contained in
electronic products
Part
Description| Toxic or hazardous substances and elements
---|---
Lead
(Pb)| Mercury
( Hg)| Cadmium
( Cd)| Hexavalent
chromium
(Cr VI))| Polybrominated
biphenyls
(PBB )| Polybrominated
diphenyl ethers
(PBDE)
PCB| 0| 0| 0| 0| 0| 0
Plastic| 0| 0| 0| 0| 0| 0
TPU| 0| 0| 0| 0| 0| 0
This form is compiled in accordance with SJ/T 11364. 0: It indicates that the
content of the toxic and harmful substance in all homogeneous materials of the
component is below the limit specified in GB/T 26572 standard.
X: The content of toxic and harmful substances in at least one homogeneous
material of this part exceeds the limit stipulated in GB/T 26572 standard.
This product complies with EU RoHS 2.0 Directive (2011/65/EU)
Warm Tip
The 5-year icon refers to the “effective life of environmental protection”,
not the product quality assurance period. Electronic products all contain
toxic and harmful substances such as lead, mercury, and cadmium. Once they are
overused, toxic and harmful substances may leak or mutate, cause pollution to
the environment, or cause serious damage to people and property. The term
“environmental protection use” means that all electronic products will be
required to use within this effective period. We will no longer be responsible
for the quality of the products due to the safety risks that arise after the
safe use period.
It is hereby declared that WXYL-01, WXYL-09, WXYL-0S a product model of
Shenzhen Times Innovation Technology Co., Ltd., complies with the provisions
of 2014/53/EU and 2011/65/EU. The full text of the EC Declaration of
Conformity can be found on the following website:
www.baseus.com
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with the provisions of Directive 2012/19/EU. It is strictly forbidden to dispose of this equipment with ordinary trash; it must be recycled. This symbol indicates that the product shall not be treated as regular domestic trash, and must be delivered to a recycling center that is capable of recycling electronic and electrical equipment.
Manufacturer: Shenzhen Times Innovation Technology Co., Ltd. Add: 5th Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen Executive Standard: Q/SSCZ 010-2019 Hotline: +86-4000-712-711 Website: www.baseus.com
Warning: Please follow the above safety instructions otherwise it will cause Afire, electric shock, damage, or other damage.
PB1388Z-P0A1
Designed by Baseus
Made in China