SME-SCPCAM V3 Powerful Universal Wifi Spotting Scope HD Video Camera Instruction Manual
- June 6, 2024
- SME
Table of Contents
SPOT SHOT SME-SCPCAM V3 Wifi Scope Cam Instruction Manual
Product by SME
A GSM, LLC Brand
www.shootingmadeeasy.com
877-269-8490
Thank you for purchasing the WIFI Scope Cam
Included
Spotting Scope sold separately
Attaching to Spotting Scope
Make sure grips inside rotating chucks are full open.
Rotate lower rotating chuck counter-clockwise (when viewing from bottom) to open grips.
Carefully place WIFI Scope cam over eyepiece of spotting scope.
(Spot Shot WIFI Scope Cam will fit eyepieces with diameters range of 1” – 2.25” )
Secure Camera by rotating chuck counter-clockwise (when viewing from top) to close grips.
DO NOT OVERTIGHTEN
If your camera is not straight, rotate main body. Use power button as reference. Camera is straight when power button logo is centered on top.
Note all focus will come from the spotting scope. Use scope as you normally would
Download the SME SpotShot APP
- Download the SME Spot Shot APP from the Apple App Store or Google Play Store
- Power on the WIFI Scope Cam
- Connect to the SpotShot WIFI network as you would any other WIFI network. Go to the WiFi settings on your mobile device and select the Spot Shot Wifi.
- Launch the App and select Connect
- Make sure you are connecting to correct network. If correct, select Proceed. If not, select Settings to change
RF exposure statement
This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body. This equipment meets the exemption from the routine evaluation limits in section 2.5 of RSS-102. It should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body.
FCC Warning
FCC ID: 2AU3A-SCPCAMV3
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
IC WARNING
This device contains licence-exempt transmitter(s) that comply with
Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
Limited Warranty
SME Spot Shot WIFI Scope Cam are covered by a One Year Limited Warranty. This Warranty covers rangefinders with manufacture defects. Normal wear & tear as well as product abuse are not covered by the warranty.
This Warranty is valid only for the original owner of the WIFI Scope Cam purchased from an authorized retailer. Tampering with or altering the unit will void the warranty.
Any unauthorized service will void the warranty. Original sales receipt must be produced for any warranty service and a Return Authorization (RA) number must be obtained from customer service at 877-269-8490 prior to returning the product.
For more information go to www.shootingmadeeasy.com
Patent Pending
GSM, LLC
PO Box 535189, Grand Prairie, TX 75053-5189
Toll Free: 877-269-8490