EZVIZ EZ-LC1C LED Light Bulb User Guide

EZVIZ EZ-LC1C LED Light Bulb User Guide

Overview

Package Contents

• Open/Close Detector
  

• Shielding Cover

• Regulatory Information

• Quick Start Guide

Basics

Name

|

Description

---|---

LED Indicator

|

• Fast-flashing Blue: Detector enters device adding mode.
• Fast-flashing Blue 3 Times: Changing working mode.
• Blue for 1 second: PIR signal triggered/waken the device by pressing the RESET button/tamper alarm triggered.

Shielding Cover

|

Fix it on the lens to limit detection range.

Name

|

Description

---|---

RESET Button

| Press and hold for about 5 seconds, the device will enter device adding mode. Double press to change working mode (the interval between the two pressings should be less than 1 second).

• Factory Mode: Detect objects in every 10 seconds.
• Power Saving Mode: Detect objects in every 1 minute.

Get the EZVIZ App

1. Connect your mobile phone to Wi-Fi (suggested).
2. Download and install the EZVIZ app by searching for “EZVIZ” in the App Store or Google PlayTM.
3. Launch the app and register an EZVIZ user account.
   EZVIZ App

If you have already used the app, please make sure that it is the latest version. To find out if an update is available, go to the app store and search for “EZVIZ”.

Preparations

1. Remove Cover
   Remove the cover of the detector by turning the cover counterclockwise as
   shown in the figure below.

2. Remove Insulation Strip
   Press and hold the battery, and then remove the battery insulation strip.

Note

• After removing the insulation strip, before performing any operations, please wait about 2-3 minutes, which will make the PIR detection performance more stable.
• When the battery level is low, the low battery notification will be pushed to the EZVIZ app to remind you to replace batteries.
• If you need to replace batteries, please purchase CR2450 620mAh batteries.
• When replacing batteries, please insert with the positive side facing up.

Add Device

The detector should be used along with EZVIZ Smart Gateway (afterinafter referred to as “gateway”). Please add gateway to the EZVIZ cloud, and then add the detector to the gateway by the following two methods.

Method One: Add by Scanning QR Code

1. Log in to your account through EZVIZ app, tap the device adding icon and then the QR code scanning interface will be displayed.

2. Scan the QR code on the inner side of the cover or on the user manual, and then add the detector to the gateway
   

3. Rotate the cover clockwise until the installation instruction mark and the EZVIZ logo are aligned.

Method Two: Add by the Gateway

When adding detector by the gateway, place the detector as close to the gateway as possible.

1. Make the gateway enter device adding mode as instructed by the user manual of the gateway
2. Press and hold the RESET button for over 5 seconds until the indicator on the detector turns fast-flashing blue, and then the detector will enter adding mode.
3. The detector will be added to the gateway automatically, and the LED indicator will be off.
4. Rotate the cover clockwise until the installation instruction mark and the EZVIZ logo are aligned.

Installation

The detector can be put on the table, or be sticked on where you want through the double-sided tape at the bottom of the detector. The following installation positions and angles are only for reference.

1.8m Wall Mount

For better detection effect, please make the side with installation instruction mark and EZVIZ logo faces the ground as shown in the figure below.
Fig. 1 Side view of the detection range

Note

• After you have installed the detector, you need to adjust the angle of the detector to get appropriate detection range.
• The detection angle of the detector are 90° vertically and horizontally.
• The detector should be placed facing an area where people often walk across, and there should be no obstacles in front of the detector.
• Do not install the detector at places with intense direct sunlight or places where temperature changes greatly (near air conditions, refrigerators, electric fans, ovens, windows, and more).
• Before sticking the dector, clean the surface first. Do not stick the detector on limewashed walls.
  Fig. 2 Top view of the detection range
  

2.1m Wall Mount (Prevent False Alarms Produced by Pets)

For better detection effect, please make the side with installation instruction mark and EZVIZ logo faces the ground as shown in the figure below.
Fig. 1 Side view of the detection range

Note

• The shielding cover will prevent part of the detector receiving heat radiation emitted by moving objects, thus limits detection range of the detector. This can prevent false alarms especially produced by pets.
• If you have pets, the installation height=pet height+0.5m; if the pet height ≤ 0.5m, the recommended installation height is 1m.
• After using the shielding cover, the maximum detection distance of the detector is 5m.
  Fig. 2 Top view of the detection range
  

Regulatory Information

 This product and – if applicable – the supplied accessories too are marked with “CE” and comply therefore with the applicable harmonized European standards listed under the Radio Equipment

Directive 2014/53/EU, the EMC Directive 2014/30/EU, the RoHS Directive 2011/65/EU. 2012/19/EU

(WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info.

EC DECLARATION OF CONFORMITY

Hereby, Hangzhou EZVIZ Software Co., Ltd. declares that the radio equipment type [CS-A1S-32W (E2G), CS-A1-32W, CS-A3, CS-T1C, CS-T2C, CS-T3C, CS-T9-A, CS-T4-A] is in compliance with Directive 2014/53/EU.

The full text of the EC DECLARATION OF CONFORMITY is available at the following web link: http://www.ezvizlife.com/declaration-of-conformity.

Use only power adapters listed in the Table.

ADS-5RE-06 05050EPCU/EPC(US), ADS-5RH-06 05050EPB(UK), ADS-5RH-06 05050EPG(EU), ADS-5RH-06 05050EPSA(AU), ADS-5RH-06 05050EPBR(BR), ADS-5RH-06 05050EPI(IN), ADS-5MA-06A 05050GPK(KR)
 | Sichuan Jiuzhou Electronic Technology Co., Ltd| DYS05100CP-U, DYS05100CP-E

Important Safety Information

• Direct current.

• Note: Please read the manual before using the device.

• This symbol on the device indicates that the safety compatibility manual and / or installation manual must be read, which contains information related to the safe operation of the device.
  Caution: Be sure to read these instructions before operating the equipment.

• Warning: For SELV DC input: the DC power source shall comply with the Safety Extra-Low Voltage (SELV) requirements of IEC/EN 60950-1, IEC/EN 62368-1.
  Warning: The power source should meet limited power source or PS2 requirements according to IEC/EN 60950-1 or IEC/EN 62368-1.

Warning:

• Warning: If you want to disconnect the device from the power source, please unplug the DC power terminal that connects the power adapter and device.
• Warning: Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery that can result in an explosion.
• Warning: Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas.
• Warning: A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
• Warning: Dispose of used batteries according to the instructions.
• Warning: Replace only with the same or equivalent type recommended by the manufacturer.
• Caution: THE PRODUCT IS BUILT IN A REPLACEABLE BATTERY.
• Warning: Do not ingest battery, Chemical Burn Hazard.
• Caution: This product contains a coin/button cell battery. If the coin / button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
• Caution: Keep new and used batteries away from children.
• Caution: If the battery compartment does not close securely, stop using the product and keep it away from children.
• Caution: If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
• Caution: Risk of fire or explosion if the battery is replaced by an incorrect type

FCC Information

Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC compliance

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body

FCC Conditions

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Industry Canada ICES-003 Compliance

This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

1. this device may not cause interference, and
2. this device must accept any interference, including interference that may cause undesired operation of the device.

Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.

This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body

COPYRIGHT © Hangzhou EZVIZ Software Co., Ltd. ALL RIGHTS RESERVED.
Any and all information, including, among others, wordings, pictures, graphs are the properties of Hangzhou EZVIZ Software Co., Ltd. (hereinafter referred to as “EZVIZ”).

This user manual (hereinafter referred to as “the Manual”) cannot be reproduced, changed, translated, or distributed, partially or wholly, by any means, without the prior written permission of EZVIZ. Unless otherwise stipulated, EZVIZ does not make any warranties, guarantees or representations, express or implied, regarding to the Manual.

About this Manual

The Manual includes instructions for using and managing the product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version in the EZVIZ™ website (http://www.ezvizlife.com).

Revision Record

New release – January, 2021

Trademarks Acknowledgement

EZVIZ™, ™, and other EZVIZ’s trademarks and logos are the properties of
EZVIZ in various jurisdictions. Other trademarks and logos mentioned below are the
properties of their respective owners.

Legal Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND ERRORS, AND EZVIZ MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL EZVIZ, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF EZVIZ HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL EZVIZ’S TOTAL LIABILITY FOR ALL DAMAGES EXCEED THE ORIGINAL PURCHASE PRICE OF THE PRODUCT.

EZVIZ DOES NOT UNDERTAKE ANY LIABILITY FOR PERSONAL INJURY OR PROPERTY DAMAGE AS THE RESULT OF PRODUCT INTERRUPTION OR SERVICE TERMINATION CAUSED BY: A) IMPROPER INSTALLATION OR USAGE OTHER THAN AS REQUESTED; B) THE PROTECTION OF NATIONAL OR PUBLIC INTERESTS; C) FORCE MAJEURE; D) YOURSELF OR THE THIRD PARTY, INCLUDING WITHOUT LIMITATION, USING ANY THIRD PARTY’S PRODUCTS, SOFTWARE, APPLICATIONS, AND AMONG OTHERS.

REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF
PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS. EZVIZ SHALL NOT TAKE ANY RESPONSIBILITES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, EZVIZ WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. SURVEILLANCE LAWS AND DATA PROTECTION LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. EZVIZ SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH ILLEGITIMATE PURPOSES.

IN THE EVENT OF ANY CONFLICTS BETWEEN THE ABOVE AND THE APPLICABLE LAW, THE LATTER PREVAILS.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>