EZVIZ CSDP26E2 Wire Free Peephole Doorbell User Guide

COPYRIGHT © Hangzhou EZVIZ Software Co., Ltd. ALL RIGHTS RESERVED.
Any and all information, including, among others, wordings, pictures, graphs are the properties of Hangzhou EZVIZ Software Co., Ltd. (hereinafter referred to as “EZVIZ”).  This user manual (hereinafter referred to as “the Manual”) cannot be reproduced, changed, translated, or distributed, partially or wholly, by any means, without the prior written permission of EZVIZ. Unless otherwise stipulated, EZVIZ does not make any warranties, guarantees, or representations, express or implied, regarding the Manual.

About this Manual

The Manual includes instructions for using and managing the product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version in the ™ website (http://www.ezvizlife.com).
Revision Record
New release – January 2021
Trademarks Acknowledgement
and other EZVIZ’s trademarks and logos are the properties of EZVIZ in various jurisdictions. Other trademarks and logos mentioned below are the properties of their respective owners.

Legal Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE, AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND ERRORS, AND EZVIZ MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL EZVIZ, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL,  INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH  THE USE OF THIS PRODUCT, EVEN IF EZVIZ HAS BEEN ADVISED OF THE  POSSIBILITY OF SUCH DAMAGES. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL EZVIZ’S TOTAL LIABILITY  FOR ALL DAMAGES EXCEED THE ORIGINAL PURCHASE PRICE OF THE PRODUCT. EZVIZ DOES NOT UNDERTAKE ANY LIABILITY FOR PERSONAL INJURY OR PROPERTY DAMAGE AS THE RESULT OF PRODUCT INTERRUPTION OF SERVICE TERMINATION CAUSED BY: A) IMPROPER INSTALLATION OR USAGE OTHER THAN AS REQUESTED; B) THE PROTECTION OF NATIONAL OR PUBLIC INTERESTS; C) FORCE MAJEURE; D)  YOURSELF OR THE THIRD PARTY, INCLUDING WITHOUT LIMITATION, USING ANY THIRD PARTY’S PRODUCTS, SOFTWARE, APPLICATIONS, AND  AMONG OTHERS. REGARDING THE PRODUCT WITH INTERNET ACCESS, THE USE OF THE PRODUCT SHALL BE WHOLLY AT YOUR OWN RISK.  EZVIZ SHALL NOT TAKE ANY RESPONSIBILITY FOR ABNORMAL OPERATION, PRIVACY LEAKAGE, OR OTHER DAMAGES RESULTING FROM  CYBER-ATTACKS, HACKER ATTACKS, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, EZVIZ WILL PROVIDE TIMELY  TECHNICAL SUPPORT IF REQUIRED. SURVEILLANCE LAWS AND DATA PROTECTION LAWS VARY BY JURISDICTION. PLEASE CHECK ALL  RELEVANT LAWS IN YOUR JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS TO THE  APPLICABLE LAW. EZVIZ SHALL NOT BE LIABLE IN THE EVENT THAT THIS THE PRODUCT IS USED FOR ILLEGITIMATE PURPOSES. IN THE EVENT  OF ANY CONFLICTS BETWEEN THE ABOVE AND THE APPLICABLE LAW, THE LATTER PREVAILS.

Attention

• Do not expose the camera to a harsh environment like high temperature, humidity, salt mist, or rain, otherwise, the device may be damaged.
• Do not press the sensor or lens of the camera, otherwise, the device may be damaged.
• Do not pull the wire of the camera hard, and protect yourself from being cut by the wire. Damage to the wire due to inappropriate operation is not included in the warranty.
• Use the exclusive power adapter to charge the panel, otherwise, the system may be damaged.

Box Content

| | |
---|---|---|---
Camera (x1)| Panel (x1)| Mounting Base (x1)| Buckle (x1)
| | |
Screws (x6)| power cable (x1)| Regulatory Information (x1)| Quick Start Guide (x1)

Overview Panel

device.
• Press the Home Button to light up or off the screen.

Camera

Do not block the sensors.

Mounting Base

Get the EZVIZ App

– Connect your mobile phone to Wi-Fi using your 2.4GHz network (suggested).
– Download and install the EZVIZ app by searching “EZVIZ” in the App Store or Google Play TM.
– Launch the app and register an EZVIZ user account.

EZVIZ App
|

If you have already used the app, please make sure that it is the latest version. To find out if an update is available, go to the app store and search for EZVIZ.

Setup

Follow the steps to set your peephole:

1. Install your peephole and power on.
2. Log in to your EZVIZ app user account.
3. Connect your peephole to the Internet.
4. Add your peephole to your EZVIZ account.

Installation

1. Install the Micro SD Card (Optional)
– Insert the micro SD card (sold separately) into the card slot as shown in the figure below.

– In the EZVIZ app, tap the Storage Status in the Device Settings interface to check the SD card status.
– If the memory card status displays as Uninitialized, tap to initialize it. The status will then change to Normal and it can store videos.

2. Install the peephole
If you already have a peephole, install the device in the same place. If not, please drill a hole of diameter about 18mm and about 145cm distance from the ground to have a good viewing effect.

| Measure the door’s thickness and select the appropriate screws.
---|---
Thickness| Screw
35 to 60mm|
60 to 85mm|
85 to 105mm|
| |
---|---|---
Turn the screws into the back of
camera.| Tear off the release paper.| Pass screws and wire through the
door. You can roll up the paper to help.
| |
---|---|---
Adjust the camera’s position and push it close to the door gently.| Insert the USB into the base slot.| Pass screws through the mounting hole.
| | |
---|---|---|---
Adjust the mounting base’s position
and tighten the screws.| Put the wires in th groove and
insert the buckle.| Slide the panel into the mounting
base.| Installation complete.

Power on

|
---|---
Hold the power button for 3 to 5 seconds to power on the panel.| Follow the wizard to select your Wi-Fi and enter a password.

Add to EZVIZ App

-Log in to the EZVIZ app.
-On the Home screen, tap “+” on the upper-right corner to go to the scan QR code page.
-Scan the QR code.
If you failed to get the QR code or want to reconfigure Wi-Fi, please tap Settings -> Firmware to see the QR code.

Charge the Panel

When the battery is low, connect the panel with the power outlet via a power adapter (5V 2A, sold separately).
Do not charge through the type-C interface at the bottom.

Restore to Factory Settings

Tap Settings -> Firmware -> Default and confirm to restore the device to factory settings.

View Your Device

The app interface may be different due to version updates, and the interface of the app you installed on your phone shall prevail.
1. Live View
When you launch the EZVIZ app, the device page displays as shown below. You can view and listen to a live feed, take snapshots, record videos, and choose video definition as needed.
Swipe left and right across the screen to see more icons.

Settings

On the settings page, you can set the parameters of the device.

changing the value of detection
sensitivity. The higher sensitivity is, the easier people farther to the camera can be
detected.
Detection Notification| If disabled, notifications will not be pushed to your app once targets are detected.
Audio| If disabled, there will be no audio when you are viewing real-time videos or recorded videos
Audio Mode| • Intercome: Press and hold to send voice messages.
• Voice Call: Tap to start a voice call.
Status Light| If enabled, the LED indicator on the camera will be on; otherwise, the LED indicator will not be on.
IR Light| IR light helps the camera get black and white images in low light conditions. If disabled,
quality of images captured in dark environments will be influenced.
Day/Night Switch| • Auto (recommended)
• Auto Switch Sensitivity:
• High Sensitivity
• Medium Sensitivity
• Low Sensitivity
• Enforcing Day Mode: IR mode stays off.
• Enforcing Night Mode: IR mode stays on, with clear images in a dark environment.
Screen Setting| • Auto wake-up: When a person is detected, the screen automatically wakes up, with higher power consumption.
• Brightness: You can select the brightness level, the higher level you select, the brightness of the video will be higher.
• Sleep: You can select the time of the screen sleep.
Battery| You can see the battery capacity.
Time Zone| You can select a time zone as needed here.
Date Format| You can select the date format as needed here.
Wi-Fi| You can see the Wi-Fi that the device has connected to, and you can tap to change to another Wi-Fi.
Wi-Fi Management| • Static DNS: If enabled, you can customize the DNS address.
• Wi-Fi Sleep Mode: You can choose the Wi-Fi Sleep mode.
• Low Power Mode
• Ultra-Low Power Mode
Cloud Storage| You can subscribe and manage the cloud storage.
Storage Status| You can see micro SD card status and capacity.
Device Version| You can see the device version here.
Image Encryption| If enabled, your picture and videos will be protected by the device password.
Offline Notification| If enabled, notifications will be pushed to your app once the camera is offline.
User Guide| You can read the user guide of the camera here.
About| You can mark where the device is installed, and get the product category, device model, serial number, and device QR code here.
Delete Device| Tap to delete the camera from your EZVIZ account.

EZVIZ Connect

1. Use Amazon Alexa
These instructions will enable you to control your EZVIZ devices with Amazon Alexa. If you run into any difficulties during the process, please refer to Troubleshooting.
Before you start, make sure that:

1. EZVIZ devices are connected to the EZVIZ app.
2. In the EZVIZ app, turn off the “Image Encryption” on the Device Settings page.
3. You have an Alexa-enabled device (i.e Echo Spot, Echo-Show, All-new Echo-Show, Fire TV (all generations), Fire TV stick (second-generation only), or Fire TV Edition smart TVs).
4. The Amazon Alexa app is already installed on your smart device, and you have created an account.

To Control EZVIZ devices with Amazon Alexa:

1. Open the Alexa app and select “Skills and Games” from the menu.
2. On the Skills and Games screen, search for “EZVIZ”, and you will find “EZVIZ” skills.
3. Select your EZVIZ device’s skill, then tap ENABLE TO USE.
4. Enter your EZVIZ username and password, and tap Sign in.
5. Tap the Authorize button to authorize Alexa to access your EZVIZ account, so that Alexa can control your EZVIZ devices.
6. You will see “EZVIZ has been successfully linked”, then tap DISCOVER DEVICES to allow Alexa to discover all your EZVIZ devices.
7. Go back to the Alexa app menu and select “Devices”, and under devices, you will see all your EZVIZ devices.

Voice Command

Discover a new smart device via the “Smart Home” menu in the Alexa app or the Alexa Voice Control function. Once the device is found, you can control it with your voice.  Speak simple commands to Alexa.
Your device’s name for example: “show xxxx camera,” can be changed in the EZVIZ app. Each time you change the name of the device will need to discover the device again to update the name.
Troubleshooting
What should I do if Alexa fails to discover my device? Check if there are any Internet connecting problems. Try to restart the smart device and re-discover the device on Alexa.
Why the device’s status is “Offline” on Alexa? Your device might have been disconnected from the network. Restart the smart device and re-discover on Alexa. Check if your router is connected to the Internet and try again.
For details about countries where Amazon Alexa is available, see Amazon Alexa’s official website.

2. Use Google Assistant

With Google Assistant, you can activate your EZVIZ device and watch live by speaking Google Assistant voice commands.

The following devices and apps are required :

1. A functional EZVIZ app.
2. In the EZVIZ app, turn off the “Image Encryption” and turn on the “Audio” in the Device Settings page.
3. A TV with a functional Chromecast connecting to it.
4. The Google Assistant app on your phone.

To get started, follow the steps below:

1. Set up the EZVIZ device and make sure it works properly on the app.
2. Download the Google Home app from the App Store or Google Play Store TM and log into your Google account.
3. On the Myhome screen, tap “+” on the upper-left corner, and select “Set up device” from the menu list to go to the Setup interface.
4. Tap Works with Google, and search for “EZVIZ”, where you will find “EZVIZ” skills.
5. Enter your EZVIZ username and password, and tap Sign in.
6. Tap the Authorize button to authorize Google to access your EZVIZ account, so that Google can control your EZVIZ devices.
7. Tap Return to the app.
8. Follow the above steps to complete the authorization. When synchronization is completed, the EZVIZ service will be listed under your list of services. To see a list of compatible devices under your EZVIZ account, tap on the EZVIZ service icon.
9. Now try some commands. Use the name of the camera that you created when you set up the system.
   Users can manage devices as a single entity or in a group. Adding devices to a room allows users to control a group of devices at the same time using one command. See the link for more information: https://support.google.com/googlehome/answer/7029485?co=GENIE.Platform%3DAndroid&hl=en
   For additional information about the device, please refer to www. Aziz. EU.

Regulatory Information

This product and – if applicable – the supplied accessories too are marked with “CE” and comply therefore with the applicable harmonized European standards listed under the Radio Equipment Directive 2014/53/EU, the EMC Directive 2014/30/EU, the RoHS Directive 2011/65/EU.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see www.recyclethis.info.
2006/66/EC and its amendment 2013/56/EU (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European  Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead  (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see www.recyclethis.info.

EC DECLARATION OF CONFORMITY

Hereby, Hangzhou EZVIZ Software Co., Ltd. declares that the radio equipment type [CS-C1C, CS-C1HC, CS-C1T, CS-C2C, CS-CV206, CS-CV310, CS-C3N, CS-C3T, CS- C3TN, CS-C3HX, CS-C3W, CS-C3WN, CS-C3X, CS-C6N, CS-CV246, CS-CV248, CS-C6CN, CS-C6C, CS-C6W, CS-TY1, CS-TY2, CS-TY3, CS-CV336, CS-DB1, CS-DB2 (3MP), CS-DB2 (5MP), CS-DP1, CS-DP2, CS-DP1C, CS-DP2C, CS-DB2C, CS-C4W, CS-C4C, CS-CV228, CS-C5W, CS-C5C, CS-C5HC, CS-C5X, CS-C5HX, CS-C8PF, CS-C8T, CS-C8TN, CS-C8W, CS-C8C, CS-CP1, CS-C3A, CS-BC1, CS-BC1(4MP, W1), CS-BC1-B1, CS-BC1-B2, CS- BC1-B3, CS-BC1-B4, CS-BC1C (4MP, W1), CS-BC8C, CS-BC8C (4MP, W1), CS-BC2, CS- BC3, CS-BC3 (3MP, W1), CS-BC3 (4MP, W1), CS-BC3C, CS-BC3C (3MP, W1), CS-BC3C (4MP, W1), CS-BC8, CS-BC8 (3MP, W1), CS-BC8 (4MP, W1), CS-BM1, CS-W2H, CS-W2H (4MP, W1)] is in compliance with Directive 2014/53/EU. The full text of the EC DECLARATION OF CONFORMITY is available at the following web link:
http://www.ezvizlife.com/declaration-of-conformity.
Use only power adapters listed in the Table.

CS-010/ CS-C1 HC/ CS-C1 T/ CS-C2C/ CS-CV206/ CS-CV246/ CS-C6N/ CS-C6CN/ CS- C6C/ CS-TY1/ CS-TY2/ CS-TY3/ CS-W2D/ CS-BC1C/ CS-CP1/| Shenzhen Honor Electronics Co Ltd| ADS-5RE-06 05050EPCU/EPC(US), ADS-5RH-06 05050EPB(UK), ADS-5RH-06 05050EPG(EU), ADS-5RH-06 05050EPSTU), ADS-5RH-06 05050EPBR BR), ADS-5RH-06 05050EPION , ADS-5MA-06A 05050GPK(KR)
Sichuan Jiuzhou Electronic Technology Co., Ltd| DYS051000P-U, DYS051000P-E
CS-CV248/ CS-C6W/ CS-C6Wi/
CS-CV336/ CS-DP1/ CS-DP1 C/ CS-DP2C/ CS-C3A/ CS-BC1/ CS-CP1/ CS-BC1 C/ CS-BC1 C (4MP, W1) / CS-BC3/ CS-BC3C/ CS-BC8/ CS-BC8 (4MP, W1) / CS-BC8C/ CS-BC8C (4MP, W1)/ CS-BM1/ CS-BC3
1 4MP,W1 / CS-BC3C/ (4MP,W1)/ CS-BC1 4MP,W1 / CS-BC8C (3MP,W1)/ CS-BC8 3MP,W1 / CS-BC3 (3MP,W1 ) CS-BC3C 3MP,W1| Shenzhen Honor Electronic Co., Ltd| ADS- 10LA-06 05010EPCU/EPC(US), ADS-10RH-06 05010EPB (UK), ADS-10RH-06 05010EPG(EU),
A), ADS-10RH-06 05010EPBR B
ADS-10RH-06 05010EPS ADS-10RH-06 0501 OEPION ,
TR),
ADS-12CG-06 05010EPC(JP)
Sichuan Jiuzhou Electronic Technology Co., Ltd| DYS05200CQ-U, DYS05200CQ-E
CS-CV310/ CS-C3N/ CS-C3W/ CS-C3WN/ CS-C3X/ CS-SD1/ CS-C4W/ CS-C4C/ CS-CV228/ CS-C8W/ CS-C8C/ CS-W2H/ CS-W2H (4MP, W1)/ CS-W3C-WD1200G/ CS-T8-B/CS-C3T/ CS- C3TN/ CS-C3HX/ CS-C8PF/ CS-C8T/ CS-C8TN| Shenzhen Honor Electronic Co., Ltd| ADS-12FG-12N 12012EPCU(US), ADS-12FG-12N 12012EPB(UK), ADS-12FG-12N 12012EPG(EU), ADS-12FB-12 12012EPSA(AU), ADS-12FG-12N 12012EPBR(BR), ADS-12FG- 12N 12012EPION)

Important Safety Information

Note: Please read the manual before using the device.
This symbol on the device indicates that the safety compatibility manual and/or installation manual must be read, which contains information related to the safe operation of the device.
Caution: Be sure to read these instructions before operating the equipment.
** This symbol on the device indicates that the surface or component is overheating. If you touch this surface, you may cause personal injury.
Warning: To reduce the risk of personal injury due to overheating of the components, wait until the surface cools down before touching it.
Warning: The separate earthing terminal must be permanently connected to the earth.
Warning:** For SELV DC input: the DC power source shall comply with the Safety Extra-Low Voltage (SELV) requirements of EN/IEC 60950-1, EN/IEC 62368-1.

Caution: Do not block ventilation openings while the system is on, and keep at least 2 cm distance from ventilation openings and walls or other things which may block the openings.
Warning: Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery that can result in an explosion.
Warning: Leaving a battery in an extremely high temperature surrounding environment can result in an explosion or the leakage of flammable liquid or gas.
Warning: A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas.
Warning: Dispose of used batteries according to the instructions.
Warning: Replace only with the same or equivalent type recommended by the manufacturer.
Caution: THE PRODUCT IS BUILT IN A REPLACEABLE BATTERY.
Warning: Do not ingest battery, Chemical Burn Hazard.
Caution: This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
Caution: Keep new and used batteries away from children.
Caution: If the battery compartment does not close securely, stop using the product and keep it away from children.
Caution: If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
Caution: Risk of fire or explosion if the battery is replaced by an incorrect type.
Warning: The power source should meet limited power source or PS2 requirements according to IEC 60950-1 or IEC 62368-1.
Warning : Do not block ventilation openings while the system is on, and keep at least 2 cm distance from ventilation openings and walls or other things which may block the openings.
Warning: Do not attempt to disassemble, repair, or alter the device.
Warning: To avoid electric shock, please wear shoes with rubber soles. To avoid injuries, please wear gloves when maintaining the device.
Warning: If you are not familiar with the knowledge of cable laying and cable connection, please make sure that the power switch has been turned off before installation and maintenance.

FCC Information

Please take attention that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC compliance

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help. This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body.

FCC Conditions

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Industry Canada ICES-003 Compliance

This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.
This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>