DIGITEN MTB-4P Meat Thermometer User Manual
- October 27, 2023
- DIGITEN
Table of Contents
DIGITEN MTB-4P Meat Thermometer
At A Glance
- Celsius/Fahrenheit
- Bluetooth Connection Status
- Indicate Electricity
- Current Temperature
- Power Button
- Type-C Charge Plug
- Magnet Adsorption Base
- Probe Sockets
Quick Guide
- Hold and press the Power button for about 3s to turn on/off the thermometer.
- Short press the button to switch the temperature unit.
Specification
- Battery: 1000mAh Built-in Rechargeable Lithium Battery
- Charger Type: Type-C
- Short-term Measurement Range: -10℃~300℃ (32℉~572℉)
- Continuous Monitoring Range: -10℃~250℃ (32℉~482℉)
- Accuracy: ±1℃/±1.8℉
- Wireless Connection: Bluetooth 5.0
- Display: 3” Large LCD
- Backlight: Orange
- Calibration: ±7℃/±12℉
- Refresh Rate: 2s/Time
- Alarm: Buzzer Alarm
Note: It takes 4 hours per charge.
Probe Installation
Insert probe into the thermometer when the power is on, the thermometer will
display readings of the current temperature.
Please make sure probes are inserted into the center of the food to get
accurate temperature readings.
Free App Download
Download “Smart Life” App from Google Play or App Store for free, or scan the
QR code below to download the app directly.
Connect with Your Phone
- Register and sign in before using the App, please rest assured your personal info will not be stored and tracked. Turn on your phone’s Bluetooth.
- Don’t plug the probes until you pair the phone and thermometer.
- Click on “Add Device” to connect the Grill Meat Thermometer. After adding the device successfully, click “Done”.
- You can set the Temperature alarm and Time alarm according to your requirements, and you can also Set up the probe to choose the type of meat. The settings will be saved for the next use.
- To unpair, you must first unplug all probes, press the button 3 times quickly, the signal icon on the screen flashes, which means the pairing is released.
Warning
- Do not put the unit in high-temperature places.
- Do not put probes or metal wire into fire or contact the hot surfaces and heat sources directly.
- Do not touch hot probes with bare hands during or just after cooking. Please always wear heat-resistant gloves.
- Please rinse or wipe the probe after use, but not let it soak in water to avoid malfunctions.
- Do not press probes and the metal wire too hard, it may damage the plastic film of the wire and lead to short circuit.
- Please take off the black tip covers before using the probes.
- Please make sure to enable Bluetooth on your phone to be paired correctly.
- Please make sure connecting distance range within 394ft so as to ensure Bluetooth normal connection (with no obstructions in between)
- Please delete the previous phone connection BBQ record before changing the new phone to pair, to ensure that the Bluetooth can be paired normally.
Warranty
DIGITEN products are guaranteed to the original owner for one year against
defects in workmanship and materials.
Please feel free to contact us if you need support or meet problems.
service@digit-en.com
www.digit-en.com/support
FCC Warning
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by the manufacturer could void your authority to operate this
equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>