POWEROAK PS200 Portable Power Station User Manual

June 6, 2024
POWEROAK

logo

POWEROAK PS200 Portable Power Station

POWEROAK PS200 Portable Power Station

P/N:17.0303.0377-00A0

Safety instructions

Please observe the following instructions to ensure safe usage:

  • Do not alter or disassemble this product.
  • Do not move during charging or using it, because the vibration and impact during moving will lead to poor contact of output interface.
  • In case of fire, use dry powder fire extinguishers for this product. Do not use water fire extinguisher,which may cause electric shock.
  • Close supervision is required when using this product near children.
  • Please confirm the rated specification of your load, and do not use it beyond the specification.
  • Do not place the product near heat sources, such as electric furnace and heaters.
  • Not permitted on aricrafts because the battery capacity exceeds 100Wh.
  • Do not touch the product or the plug-in points if your hands are wet.
  • Check the product and accessories prior to every use. Do not use if it is damaged or broken.
  • Please unplug the AC adapter from the wall outlet immediately in case of lightning stroke, which may cause heating, fire and other accidents.
  • Use original charger and cables.

General Specs

POWEROAK PS200 Portable Power Station fig 1 Output SpecsPOWEROAK PS200 Portable Power Station fig
2   Input SpecsPOWEROAK PS200 Portable Power
Station fig 3   Estimated operating timePOWEROAK
PS200 Portable Power Station fig 4 Note: DOD is the battery discharge depth is the local inverter efficiency, DOD90%,

POWEROAK PS200 Portable Power Station fig 5

QUICK GUIDE

  1. DC 12V/30A Aviation Sockets port
  2. Power button
  3. Touchable interaction LCD display
  4. US AC output x 6 pcs (EU/UK AC output x 4pcs)
  5. PV/Car input port
  6. Adapter input port
  7. Wireless charging x 2pcs
  8. USB-A 5V/3A output x 2pcs
  9. DC 12V/10A cigarette lighter port
  10. USB-A 18W output x 2pcs
  11. DC 5521 output x 2pcs
  12. USB-C 100W output

Solar Charging

POWEROAK PS200 Portable Power Station fig 6

Safety instructions

POWEROAK PS200 Portable Power Station fig 7

What`s In The Box

POWEROAK PS200 Portable Power Station fig 8

Optional

POWEROAK PS200 Portable Power Station fig 9

FREQUENTLY ASKED QUESTIONS

Q. The adapter (power brick) got hot when I charge it, is that alright?

A. It’s totally normal for the adapter gets warm, because of the heat produced in circuit during charging.

Q. Why the unit shutdown automatically with my appliance connecting?
A. The“ECO MODE”(press then hold for 4s to launch) is set to shut down the unit when the AC output of the unit is lower than 50W in 4 hours for power saving.

Q. What cause the cooling fan not to launch?
A. With the excellent heat dissipation design, cooling fan will only launch when the total loads exceeds 30% of the rated output.

Q. Can I charge and discharge the power station simultaneously?
Yes, it is supported but not recommended in order to protect the lifespan of battery

Q. How to claim the warranty?
A. Please refer to the warranty card or the official website for further warranty policy.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals