POWEROAK EB55 537Wh Portable Power Station User Manual
- June 5, 2024
- POWEROAK
Table of Contents
POWEROAK EB55 537Wh Portable Power Station
SAFETY INSTRUCTIONS
Please observe the following instructions to ensure safe use:
- DO NOT attempt to replace the internal battery with anything other than the authorized replacement battery by yourself.
- DO NOT operate in wet conditions, let unit dry completely before using.
- Ensure proper ventilation while in use and do not obstruct fan openings on use. Inadequate ventilation may cause damage to the power station.
- DO NOT stack anything on top of the power station in storage or in use, vibration and impact may lead to a poor connection to the hardware inside.
- DO NOT insert foreign objects into outputs or ventilation holes.
- DO NOT place the power station near heat sources like a furnace or ambient heater too close.
- The power station generates the same potentially lethal AC power as a household wall outlet, please take care and keep children away from it.
RF Exposure Warning Statements:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment shall be installed and operated with
a minimum distance of 20cm between the radiator & body,
General Specs-Input Specs-Output Specs-Common Loads Runtime/Charges
OVERVIEW
- DC Charging Port
- Adapter Charging Port
- LCD Screen
- DC 12V Output Power Button
- DC 5521 Output Port
- Cigarette Lighter Port
- DC Output/Wireless Charging Power Button
- USB-A Output Port
- USB-c Output Port
- AC Power Button
- AC Outlet
LCD SCREEN GUIDE
- a. ECO-Mode icon
- e. Alert icon for Temperature Anomaly
- b. Battery Capacity
- f. Output Power
- C. Input Power
- g. Alert icon for Overload
- d. Alert icon for low
- Voltage
- h. Alert icon for Short Circuit
Attention:
The screen turns off when all output turns off in 2s.
The screen turns off while on standby.
How to operate on power station to turn ON/OFF EcO Model and change the working frequency:
- To Enter Settings Mode: Turn “AC” mode to the off position. Press the “AC” and “DC” buttons at the same time for 2 seconds to enter “Settings” mode.
- To Change Frequency Setting: Once in “Settings” mode, press the “AC” button to switch the frequency of the AC output ports to either 50 or 60 Hz depending on your location.
- Eco Mode: Once in “Settings” mode, press the “DC” button to turn ON/ OFF the ECO mode.
- Exit Settings Mode: Long press the “AC” and “DC” buttons at the same time for 2 seconds to save and exit the settings mode.
What’s in The Box
Extra Options
FREQUENTLY ASKED QUESTIONS
-
How do I clean for power station?
A: Dry, non-abrasive cloths to wipe will be perfect. A power station is a versatile tool for various adventures, simple cleaning would be required from time to time to keep the unit in a good condition. -
How do I store my power station?
A: Please store the power station in a dry and cool place at the recommended temperature. Do not expose the power station to a humid environment. If you want to store it for a long time, please charge your unit to 80% every 6 months to extend the lifespan of the battery. Remind to turn off the unit before storing. -
How do I know if my device will work with the power station?
A: Step1: You need to figure out the amount of power your devices require. Some research may be taken on an internet search or the user guide of your device shall suffice.
Step 2: Check the rated power of a certain port on the power station. For example, if the AC output port generates 700W of power and your device requires over 700W for an extended period of time, the power station will turn itself off. -
How to claim the warranty?
A: Please place your after-sale requirement as the warranty card written to the platform where you order the product.
FCC
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to pat 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.