Puretec SF240 Double Life Shower Filter System User Guide

June 6, 2024
Puretec

Puretec logo

Puretec SF240 Double Life Shower Filter System

Puretec Customer Service

Thank you for purchasing a Puretec Shower Filter System. Your system is a patented, proven performer, manufactured from only quality materials and components and will give years of clean, fresh, invigorating shower water free of impurities if maintained properly.
The system is designed for metropolitan supply water but can be used in other situations. For other types of water supply please contact your local Puretec stockist.
The Puretec Shower Filter System cartridge needs replacing regularly to maintain optimum performance. This is a simple process when following instructions. For cartridge, replacements contact your stockist.

Operation

The Puretec Shower Filter Systems are designed to run economically for many years dependent on the initial installation and periodical maintenance.
Flush systems for 10 minutes after any period of non-use for more than 2 days. For a period of non-use of 2 weeks or more, it may be necessary to replace the cartridge.
Caution: Do not use water that is microbiologically unsafe or with water of unknown quality without adequate disinfection before or after the system.
Installation Note: A water filter system/tap, like any product, has a limited life and may eventually fail. Also sometimes failure happens early due to unforeseen circumstances.
To avoid possible property damage, this product should be regularly examined for leakage and/or deterioration and replaced when necessary. A drain pan, plumbed to an appropriate drain or outfitted with a leak detector, should be used in those applications where any leakage could cause property damage, and/or the water supply should be turned off if no one is home/present.

Cartridge Replacement

To maintain the high quality of the purified water, replace the cartridge regularly. See Replacement Cartridge Guide below for details:

Replacement Cartridge Guide

System Model No.| Replacement Cartridge Model No.| Change Every
SF240| SF24| 12 months

Remove the existing cartridge by undoing the two parts to the filter chamber.
The SF240 cartridge can be turned around (reversed) once, for extended life. This also has the effect of backflushing the system.

System Installation

Installation is as easy as 1 – 2 – 3.

  1. Remove the existing shower head from the shower arm.Puretec SF240 Double Life Shower Filter System fig1
  2. Thread the shower filter onto the shower arm.Puretec SF240 Double Life Shower Filter System fig2
  3. Thread showerhead onto the shower filter.Puretec SF240 Double Life Shower Filter System fig3

Use Guidelines

  • Minimum operating pressure 80 kPa.

  • Maximum operating pressure 520 kPa.
    Note: Where line pressure exceeds 500 kPa, an approved pressure limiting device must be installed to comply with Australian & New Zealand Plumbing Standards.

  • Do not allow exposure to temperatures below 0°C (protect from freezing).

  • Maximum operating temperature 90°C.

  • This system must be installed according to local plumbing codes.

  • Replacement Cartridges: See Cartridge Replacement (pg. 2).

  • This system requires regular replacement of the filter cartridge to maintain proper operation. Varying chlorine, sediment, or organic substance levels may affect replacement frequency.

  • Be sure to change the filter cartridge whenever you detect a change in taste, odour, or decrease in flow.

Notes

The complete range of Puretec products are developed, refined and made to meet and exceed stringent specifications for the worldwide market.

Important Note: Sales of products are subject to our Terms & Conditions which are available upon request. All specifications, prices and photos are a guide only and are subject to change without notice. Please ring to confirm details. Do not use products with microbiological unsafe water, without adequate disinfection. Under normal circumstances a pressure limiting valve is not required. If incoming water pressure is excessive, it may however be necessary to install an approved pressure limiting valve. Maximum flow depends on cartridge, vessel, pressure, impurities etc.

Warranty

Any claim under this warranty must be made within 1 year of the date of purchase of the product. This product is warranted to be free of defect of material and workmanship for 1 year from date of purchase. Warranty is 1 year parts and labour, excludes cartridge.

Puretec is renowned for its quality and after-sales support so if you have any issues please call 1300 140 140 (AU) or 0800 130 140 (NZ). To make a warranty claim, contact us directly or the place of original purchase. All costs relating to a warranty claim must be approved by Puretec prior to any work being carried out.

Puretec will pay your reasonable, direct expenses of claiming under this warranty. You may submit details and proof of your expense claim to place of purchase for consideration.

The warranty only applies if the product was used and/or installed in accordance with the user guide and/or installation instructions. This warranty is given in lieu of all other express or implied warranties and manufacturer shall in no circumstance be held liable for damages consequential or otherwise or delays caused or faulty manufacturing except as excluded by law.

Applicable to all above, is that the warranties need to be approved by Puretec to ensure product was not incorrectly used, installed or claimed. False and incorrect claims will be pursued at Puretec’s discretion, including chargeable inspection and labour costs incurred.

Warranty/Australia

This warranty is given by Puretec Pty Ltd, ABN 44 164 806 688, 37-43 Brodie Road, Lonsdale SA 5160, telephone no. 1300 140 140 and email at sales@puretec.com.au.

This warranty is provided in addition to other rights and remedies you have under law: Our goods come with guarantees which cannot be excluded under the Australian Consumer Law. You are entitled to replacement or refund for a major failure and to compensation for other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Warranty/New Zealand

This warranty is given by Puretec Ltd, Reg. No 4464398, PO Box 875 Cambridge 3450 NZ , telephone no. 0800 130 140 and email at sales@puretec.co.nz.

This warranty is provided in addition to other rights and remedies you have under law: Our goods come with guarantees which cannot be excluded under the Consumer Guarantees Act. You are entitled to replacement or refund for a major failure and to compensation for other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Puretec User Manuals

Related Manuals