CROSSBEATS Orbit Sport Smart Watch User Manual
- June 5, 2024
- CROSSBEATS
Table of Contents
CROSSBEATS Orbit Sport Smart Watch
Overview
- Full metal built
- Air ventilated silicone belt
- 3-hole optic HR sensors
- In-built speaker setup
Special Feature
In-built mic and speaker
On watch, audio call enabled Full metal casing Up to 50 watch faces ( on app)
Premium sharp full touch display
App download
Scan the below QR Code to download the Smart Watch APP Or, Download YFIT APP from the PlayStore or APP Store
Install Straps
- To attach the straps, slide the pin (the side opposite to quick-release lever) into the notch on the watch. Attach the strap with the clasp to the top of the watch.
- While pressing the quick-release lever inward, slide the other end of the strap into place.
When both ends of the pin are inserted, release the quick-release lever.
Remove Straps
- To remove the straps, turn over the watch and find the quick-release lever.
- While pressing the quick-release lever inward, gently pull the strap away from the watch to release it.
Charging
- Charge the smart watch before using it.
- Full charge in less than 2 hours.
- Connect the back of the watch to the magnetic charging pin available in the box.
- Please use a SV charging adapter or connect USB with the laptop.
NOTE: Do not use any fast/dash charging adapters.
Connect Part 1
- Launch the YFit app on your phone.
- Click on ‘enter now’ and fill in your details.
- Allow access to location, Blue1ooth and other permissions on the popup. Go to devices tab and click on ‘Add device’
- Connect to ORBIT
Connect Part 2
- Tum on your ORBIT smartwatch
- SWipe bottom to top 5 times
- Enable the phone dial toggle
- Now turn on the Bluetooth on your smartwatch
- Search for ORBIT-BT and connect
Features
NOTE: You can answer voice calls on the phone itself
BUILT IN WATCH FACES
- SWipe right to left once on the main screen
- Scroll down until ‘watch face’
- Click on it to select custom faces
CUSTOMIZE WATCH FACES INAPP
- Go to YFit app, select the device tab
- Now click on watch faces
- Pick your choice of dial
PEDOMETER/DISTANCE/CALORIES BURNT
- SWipe bottom to top once on the main screen
- You can see all the tracked data of steps, distance, and calories burnt
SLEEP MONITOR
- Swipe bottom to top thrice on the main screen to enter sleep tracking
- You will be able to see the number of hours slept and also the light and deep sleep analysis
- On the YFh app, click on the sleep function to see a detailed analysis of your sleeping pattern
SPORTS MODE 
- Swipe left to right from main interface on the smartwatch
- Hover around on the apps menu to find 10 different sports Click on a sport to activate it
- 4 On the App, open the workout tab
- Click on the run icon to open 15 more sports mode
- Select your sport and activate it
SP02
- SWipe left to right on the main interface
- Click on the SpO2 icon to activate
- Wait for 10-15 secs for the reading to complete
- You can see more details on this on your YFit app
BREATH TRAINING
- Swipe left to right on the main interface
- Click on the breath training icon to activate
- Touch to start your training
- Follow the instructions until finish
WEATHER UPDATES
- Swipe from bottom to top 4 times on the main interface
- Check the weather forecast update
MUSIC CONTROL
- Swipe bottom to top 6 times from the main interface
- Your music control panel will appear
- Change tracks & volume levels as well
MESSAGE NOTIFICATIONS
- Swipe from top to bottom once
- Click on the message icon to open
- You will be able to see your latest messages
HOW TO ACCESS OTHER MENU
- Swipe from left to right once on the main interface
- You will be able to hover over a plethora of app and features
FLASH LIGHT
- Swipe from top to bottom once
- Click on the torch icon to turn on flashlight
- The watch screen will go white and bright
- Press the button on smartwatch to turn it off
BRIGHTNESS
- Swipe from top to bottom once
- Click on the brightness icon
- Adjust the brightness as required
STOPWATCH
- Swipe from left to right once on the main interface
- Click on the stopwatch icon to activate
- You also have pause and restart options
SEDENTARY REMINDER
- Go to the YFit app
- Under the ‘device tab’, turn on the sedentary reminder
- You can set the timing for idle alert via the App
CALL REMINDER
- Go to the YFit app and select the ‘device tab’
- Click on the call reminder and enable it to receive call alerts
NOTE: You can speak on the watch as it has in-built speaker and mic
ALARM CLOCK
- Go to the YFit app and select the ‘device tab’
- Click on the ‘alarm’ to add a new alarm or enable an existing alarm
FIND MY PHONE
- Swipe left to right on the main interface
- Click on the ‘search phone’ icon
- Your phone will ring to alert
- On your phone:
- Open the YFit app, and go to ‘device tab’
- Scroll down and click on ‘find band’, your watch will vibrate
RESTORE FACTORY
- Swipe from right to left on the main interface
- Click on the ‘reset’
- Now, click on ‘tick mark’ to reset the watch
POWER OFF
- SWipe from right to left on the main interface
- Click on ‘power off’ to turn the smartwatch off
- Open the YFit app
- Go to the settings and turn on push notifications
- Select the apps that you want to receive notifications from
- Ensure the phone and smartwatch are connected at all times
‘9 +919611293293
+91 96112 93293
[email protected]
Read User Manual Online (PDF format)
Loading......