OZARK TRAIL 91827 OZ Floating Wireless Speaker Instruction Manual

WATERPROOF BLUETOOTH SPEAKER
Item #: 91827
INSTRUCTION MANUAL

Features

Water resistance: IPX7
Hands-free speakerphone
Bluetooth wireless (version 5.0)
LED pairing indicator
Mirco-USEI port for battery recharge
How to install the anchor rope
One end of the anchor rope connects the hoop of the base of the speaker. The other end of the swing can

Control

The power I Red light)
Press to power on or off. *
Pairing Bluetooth (Blue light)
Press and hold to begin pairing to a Bluetooth device. BLUE light indicates wireless connection status.
play / Pause / Speakerphone
Press to play or pause a selected audio track. Press Dyri to answer on incoming call.
Skip Back
Press to skip back a selected audio track.
Move Forward
Press  to move forward to the next audio track.
Volume –
Press or hold to Increase the volume.
Volume+
Press or hold to decrease the volume.

CHARGE BATTERY BEFORE OPERATING
The Bluetooth floating speaker is powered by a permanently installed rechargeable 3.7V / 1,200 mAh Li-ion battery (included and non-replaceable).
1. Open the charging port door.
2. Plug the Mirco-USB into the speaker charging port.
3. Plug the USB into a computer or USB power supply. RED UGHT = CHARGING UGHT OFF = FULL CHARGE
4. Charging battery until full and the red light is off.
5. Once charged, unplug the USB from the USB port.
6. Unplug the Mirco-USB from the speaker and close the door surely. The Bluetooth floating speaker is ready for use.
7. Charging time: 3 hours.

BLUETOOTH

Device Pairing and Audio Playing

1.  Press to power on. The pairing indicator will slowly flash blue beneath .
2.  Press and hold  until blinks blue quickly. On your mobile device: switch on Bluetooth and then search “OT-SPEAKER” to pair.
3.  If your device requests a password, enter the default password: 0000.
4. The device should keep within 3 feet distance of the speaker.
5.  The blue LED light will turn wild and “BLUETOOTH CONNECTED” can be heard once paired successfully.
6. Use the controls on the speaker or on the connected device to select and play audio, and adjust the volume.
   After the initial pairing, the unit will stay paired unless unpaired manual by the user or erased due to a reset of the device. If your device should become unpaired or you find it is unable to connect, repeat the above steps.

SPEAKERPHONE

1.  After paired to your Bluetooth device, a ringtone will sound through the speaker when a call is received.
2.  Press the ****to accept the call or accept the call using the controls on the connected device.
3. The incoming call will now be heard through the speakers.
4. To end the call, press the ****or end of the call using the controls on the connected device.

Warning and Caution of the U-ion Battery:
THIS PRODUCT CONTAINS LI-ION BATTERY 3.7V / 1,200 mAh Li-ion battery has a severe risk of fire and injury if it is improperly handled or misused. Read all enclosed instructions, warnings, and precautions regarding the care, use and disposal of Li-ion battery. The enclosed Li-ion battery is only to be used with the speaker and charger included with this product.

• Keep away from flammable materials.
•  Do not expose to direct sunlight.
• Do not place in fires or leave in hot places.
•  Keep dry after use.
• Never throw the battery in a fire or attempt to open the outer casing.
• The rechargeable battery is only to be charged by adults.
• Charging cord used with the speaker is to be regularly examined for damage to the cord, plug, enclosure, and other parts. In the event of such damage, it must not be used until the damage has been repaired.

li-ion battery disposal: Li-ion batteries must be recycled or disposed of properly. They should not be disposed of with other correct recycling and/or battery disposal.
CHARGING PRECAUTIONS:

• If you suspect that the battery is damaged or swelling, discontinue operating the speaker immediately.
•  Do not modify, heat, or get the battery wet in any way.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for the compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. Consult the dealer or an experienced radio/TV technician for help.
MAINTENANCE
Keep instruction for future reference.

Federal Communications Commission (FCC) Statement. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1.  This device may not cause harmful interference, and
2.  this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna. ‘, Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. Warning: Changes or modifications made to this device not expressly approved by MAGIC TIME

INTERNATIONAL LIMITED may void the FCC authorization to operate this device. Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. RF exposure statement: The transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 5mm between the radiator and any part of your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>