siyata mobile SD7 Rugged simple and Highly Functional MCPTT Device User Guide
- June 6, 2024
- siyata mobile
Table of Contents
siyata mobile SD7 Rugged simple and Highly Functional MCPTT Device User
Guide
Thank you for purchasing the SD7 device.
The SD7 is designed to supply enterprise connectivity and enjoys the
advantages of today’s smart devices and 4G LTE networks for your daily work
usage.
Please read through this guide and safety instructions to assure a safe and pleasant use of the device.
For more information, please visit our website at www.siyatamobile.com
For your safety
NOTE: To decrease the risk of injury, please read the following important safety information before using this device. The manufacturer will not be held responsible for any damage resulting from non-standard use or usage contrary to instructions appearing in this manual.
Warning signs!
Make sure you turn off your phone in accordance with any warning signs or instructions.
Turn off your device and follow all signs and instructions in potentially explosive areas. Potentially explosive areas include fueling areas such as gas stations, areas with high content of chemicals, grains, dust or metal dust in the air and any other area where it is customary to be advised to turn off cellular devices.
Disclaimers
- Siyata Mobile will not be responsible for any issues related to the device improper usage.
- Siyata Mobile is not responsible for any third-party accessories that were not supplied with the product, and /or any damage caused to the product by any third- party accessories.
- SD7 does not include cellular or data connectivity. These should be purchased separately from your local mobile provider and depend on network plans in your region. Any use of the device is subject to the purchase of such plans and may be limited depended on the services provided by your cellular operator.
- Siyata Mobile is not responsible for any third-party applications and cannot guarantee that any such application will work on the device.
- The use of third party software applications installed on the device is subject to the acceptance of the terms and conditions of the specific software application and is limited in accordance with the applicable vendor terms.
- Certain trademarks used in connection with the product are registered trademarks of their respective owners.
Your SD7
Kit content
Your purchased SD7 device includes the following original items:
- Device
- Battery
- Micro USB Type C cable
- Ac adapter
- User Manual
NOTE: We have made every effort to ensure that the product arrives complete and in working order. If you discover any problems with this product, please contact the point of sale immediately.
Keys and connectors
Display indicators
-
Current signal Bluetooth on
-
No SIM card found BT Connected
-
**3G Connected Flight Mode
-
**4G connected No Connectivity
-
**Bluetooth on
**
- **BT Connected
**
- **Flight Mode
**
- No Connectivity
Battery replacement
- To replace the battery, press both release buttons at once,
- The battery will pop out and then can be replaced.
FCC statement
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC Radiation Exposure Statement
This device complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter.
FCC RF Exposure Information and Statement
The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue.
Device types: Tablet PC (FCC ID: 2AOCX- SD7 has also been tested against this
SAR limit.This device was tested for typical body-worn operations with the
back of the Siyata SD7 kept 0cm from the body. To maintain compliance with FCC
RF exposure requirements, use accessories that maintain a 0cm separation
distance between the user’s body and the back of the Tablet PC. The use of
belt clips, holsters and similar accessories should not contain metallic
components in its assembly. The use of accessories that do not satisfy these
requirements may not comply with FCC RF exposure requirements, and should be
avoided.
IC STATEMENT
This device complies with Industry Canada licence-exempt RSS standard(s) Operation is subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation of the device.
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled
environment. End user must follow the specific operating instructions for
satisfying RF exposure compliance. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter.
These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue.The highest SAR value for this model phone when tested for use at the ear is 0.191W/Kg and when worn on the body is 1.084W/Kg.
The maximum scaled SAR in hotspot mode is 1.162W/Kg.This device was tested for
typical body-worn operations. To comply with RF exposure requirements, a
minimum separation distance of 0mm must be maintained between the user’s body
and the handset, including the antenna. Third-party belt-clips, holsters, and
similar accessories used by this device should not contain any metallic
components. Body-worn accessories that do not meet these requirements may not
comply with RF exposure requirements and should be avoided. Use only the
supplied or an approved antenna.
Le present apparel est conform aux CNR Industries Canada applicable aux
apparels raid exempts de licence.
5150-5250MHz is only for indoor use
Thank You
