GO LABEL GL2120TH Thermal Printer Instruction Manual
- June 6, 2024
- GO LABEL
Table of Contents
The Smart Way to Manage
Your Restaurant Operations
Thermal Printer
GoLabel is a wireless label printer designed to
work with a tablet running GoOps or SubOps.
GoLabel simplifies your food prepping and
labeling procedures. This Quick Start Guide will
help you familiarize yourself with GoLabel
before you get started.
SKIP THE GUIDE AND WATCH OUR “QUICK START” VIDEO!
Watch our “Quick Start” video by
scanning the QR code or visiting
www.zippyyum.com/golabelsetup
888-636-7557
support@zippyyum.com
www.zippyyum.com
SETUP
-
Open GoLabel’s cover and remove any packaging material and the labels from inside. If the first label has tape on it, remove the tape.
-
Place the roll of labels directly into the printer so the labels feed from the top.
-
Push the roll of labels to the left so the left side of the roll is flush with the left side of the printer.
-
Feed the first label through the label feed guides, making sure the labels are aligned on the left side of the printer.
-
If the label is loose in the feed guides, ensure the label feed guides are adjusted to the width of the label by moving the right guide, keeping the left edge of the labels aligned with the left side of the printer.
-
Feed the first label through so it is slightly sticking out of the printer. Then close, the plugin, and turn on your GoLabel.
-
Download and install the GoOps or SubOps app on a compatible tablet.
|
---|---
|
- Enter your credentials, log into the app, and follow the on-screen Quick Start Guide to pair your GoLabel and set up the app.
GETTING TO KNOW YOUR GOLABEL HARDWARE
- Cover Release Button
- Connection Indicator
- Error Indicator
- Pause Button
- Feed Button
- Power Button
- Label Roll Bucket
- Left Feed Guide
- Right Feed Guide
|
---|---
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by the manufacturer could void your authority to operate this
equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator and your body.
ISED Statement:
‐ English: This device complies with Industry Canada license‐exempt RSS
standard (s). Operation is subject to the following two conditions: (1) This
device may not cause interference, and (2) This device must accept any
interference, including interference that may cause undesired operation of the
device.
The digital apparatus complies with Canadian CAN ICES‐3 (B)/NMB‐3(B).
This device meets the exemption from the routine evaluation limits in section
2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain
Canadian information on RF exposure and compliance.
This equipment complies with Canada’s radiation exposure limits set forth for
an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of
20cm between the radiator & your body.
PRINTING LABELS
HVIN: GL2120TH
Documents / Resources
| GO
LABEL GL2120TH Thermal
Printer
[pdf] Instruction Manual
GL2120TH, GU6-GL2120TH, GU6GL2120TH, GL2120TH Thermal Printer, Thermal Printer
---|---