Focus Industrial FOCUS-D200 Portable Bluetooth DVD Player User Manual

Focus Industrial FOCUS-D200 Portable Bluetooth DVD Player

Product Information

This user manual provides information about the portable Bluetooth DVD player.

Specifications

• Model : [Model]
• Frequency response : [Frequency response]
• Signal to Noise Ratio : [Signal to Noise Ratio]
• Total Harmonic Distortion : [Total Harmonic Distortion]
• MP3 link input
• Rated Voltage : [Rated Voltage]
• Tuning range : [Tuning range]
• Power : [Power]
• Material : [Material]
• Dimension : [Dimension]
• Weight : [Weight]

Product Usage Instructions

To use the portable Bluetooth DVD player, please follow the instructions below:

1. Ensure the DVD player is charged or connected to a power source.
2. Turn on the DVD player by pressing the power button.
3. Pair your Bluetooth device (e.g., smartphone, tablet) with the DVD player by enabling Bluetooth on both devices and following the pairing instructions in the DVD player’s menu.
4. Insert a DVD into the player’s disc tray.
5. Use the control buttons or remote control to navigate through the DVD menu and select the desired content.
6. Adjust the volume using the volume control buttons or the remote control.
7. To connect an MP3 player, use the provided MP3 link input cable and connect it to the appropriate port on the DVD player.
8. Use the tuning range feature to find and listen to radio stations.
9. Refer to the user manual for more advanced features and troubleshooting information.

Caution : [Caution instructions]

Caution:

1. Please be sure to read this user manual before using the device.
2. While using the device, all operations should strictly follow the instructions in this manual.
3. Keep the device in place with enough airflow, and be left 5-10 centimeters distance away from other items.
4. Avoid placing the device near any heat source, like a radiator, heater, cooker, or other heating device.
5. Avoid the power cable being stamped or squeezed, especially the connector tip and corner position.
6. Please use the supplied accessories for safety concerns.
7. In case of extreme weather or left unused for a long time, please unplug the power.
8. All maintenance work should be conducted by a qualified technician. If any damage causes the device unable to work normally, please be sure to repair it in time.
9. Avoid locations subject to extreme heat, fire, or moisture.
10. Do not place any dangerous source on top of the device, like an item containing fluid,

Warning:

• Do not disassemble the device.
• Do not place the device on top of other electronic items.
• Do not look directly at the laser beam inside the device.

NOTE: Any operation or adjustment against the product manual may cause serious laser radiation or other dangerous situations.

CLASS 1 LASER PRODUCT
This device is classified as a Class I laser product. While using the device, please strictly follow this user manual, otherwise laser radiation may be caused.

S &E
This device is manufactured strictly in compliance with the China Compulsory Certification standard and has obtained a CCC mark.

Specifications

Kind Remainder:

1. When reading files from multiple directories (such as MP3, AVI, and USB flash drive):
   • By default, this device would only show the directory after files successfully read, and unsupported format would not be displayed;
   • This device allows you to play audio and video files. When playing an audio file, use the Direction button on the remote control and move the cursor from the directory of the playlist back to the parent folder;
   • When playing the video files, use the RETURN or STOP button to back to the menu interface. (Please refer to step 2 mentioned above for detailed operation).
2. Turn page function when reading mp3 file
   • As auto turn page function is void in case of folder delamination, press the EDIT button to cancel folder delamination.
   • In case of folder delamination, press the STOP button first, then press the “PREV”/”NEXT” button to turn the page.

Remote Control

1. The sensitivity of the remote control can be influenced by light and the environment.
2. Please take out the battery inside the remote control in case of unused for a long time, to avoid the battery’s unexpected leakage and corroding the remote control.
3. Normally, the included battery can last one year’s usage, but it also depends on your use frequency. In case of remote control does not work within a short distance, please replace the battery.

Illustration

Quick Start
Insert the included power adapter into a power outlet, and connect the TYPE C power cable to the power adapter. Put a CD or storage device into the DVD player, and keep the “Power ON/OFF” button about 3s to power on the device, you can see the power indicator light on and the CD rotates. After the CD rotates for 10-20 seconds, the built-in speaker starts playing a video file. In case of switching audio devices, press the MODE button on the remote control or the topside MODE button on the device to switch mode. Keep the “Power ON/OFF” button about 3s again to turn off the device.

Note: Press the square button to open the dust-proof case. Please take out the chip-protection card before putting the  CD, and lock the case afterward

Connect to TV

HDMI output port
If your TV has an HDMI port, please use the supplied HDMI cable to connect, and switch your TV to HDMI mode after connecting.

1. POWER

   • Before powering on, please check whether the player is properly connected to another audio device. Plug the power adapter into the 220V power outlet.
   • Put the CD into the player with the cover side facing upwards.

2. TIME
   Set time duration

3. Sub-Title
   Sub-title button applies for DVD and Super video CD: When pressing it for the first time, it will display the current sub-title language mode; For DVD and Super video CD with multiple sub-titles, press this button to switch to the language you prefer; the TV screen will display the selected language code, like “language: 1 English or open.

4. DVD/USB
   In the case of a USB flash drive, press the MODE button on the remote control or topside MODE button on the device to switch to USB mode, and the device will automatically read files from the USB flash drive.

5. S ET
   Press the SET button to go into the system set-up menu

6. PROG
   PROG button applies for DVD, super video CD, VCD, CD, HD-CD, WMA, and AVI: This function allows you to randomly assign 20 songs(max) and play them in order.
   Note:

7. In case “PBC” is on, this operation would turn on/off PBC while programming.

8. Enter the number according to the prompt of the cursor, and press the PAUSE/PLAY button to play. 3. At most 20 titles, chapters, or songs can be assigned while programming.

9. Bluetooth 1 （BT1）

10. Press the “MODE” button or the “M” button(on the device) to switch to BT1 mode, the bluetooth icon will appear on the screen.

11. Enable Bluetooth on your phone, search, and connect to the DVD player.

12. Bluetooth 2 （BT2）

    • When staying on BT1 mode, keep pressing the “Play/Pause” button on the remote or the “Next” button(on the device) for about 2s to switch to BT2 mode. Then the DVD player will be ready to pair with other bluetooth devices, such as bluetooth earphones or bluetooth speakers.
    • Activate the other bluetooth devices and the DVD player will be connected to other bluetooth devices in a few seconds, and it will automatically enter DVD mode, you also can switch to USB/FM mode, and the sound will be transmitted to the bluetooth device through bluetooth.
    • Note : If the bluetooth device is off, and you want to connect to another bluetooth device, first you need to switch back to BT1 mode, then switch to BT2 mode, The DVD player will automatically pair with other bluetooth devices.

13. Direction key
    Press the Direction button to choose a file, zoom picture, or rotate the picture when reading Picture-CD.

14. SYS
    System buttons apply for DVD, Super Video CD, VCD, CD, CD-G, HD-CD, WMA, AVI, MP3, and J PEG: For pressing for the first time, it would display the current system. Three systems are available, press the SYS button to switch the video output system.

    • Note : This device offers a TV AUTO system, and automatically choose optimized resolution depending on different disks (Note: the full screen is not available for widescreen format); To adapt to the different system setting of PAL and NTSC TV, press the SYS button to choose video mode in case it does not show full screen or no color. When some functions of the disk are unable to be fully displayed in a certain system, “AUTO” is recommended.

15. FWD/REW

    • Press the FWD button to fast forward, no sound output during this period;
    • Press the REW button to rewind, no sound output during this period.

16. Audio/Channel
    Choose the Left/Right channel, this button applies to DVD, VCD, VCD, CD, CD-G, HD-CD, WMA, AVI, MP3/JEPG disk.
    Note :

    • For pressing the first time, it would display the current channel.
    • Press the AUDIO button to switch channels.
    • For a disk with dual language, press the AUDIO button to switch language.

17. Number button

18. OK/Enter: Press the OK button to choose the file or enter it into the next catalog.

19. MENU
    The MENU button applies to DVDs.

    • Press the MENU button to display the main menu of the DVD, use the Direction button to move the cursor, and choose the file.

20. RETURN
    While playing the DVD, press the RETURN button to back to the main menu.

    • Note : The RETURN button is void while playing MP3, CA, and VCD1.1 disk.

21. PLAY/PAUSE
    PLAY/PAUSE button applies for DVD, Super Video CD, VCD, CD, CD-G, HD-CD, WMA, AVI, MP3, and J PEG. Press the PAUSE button to stop; Press again to back to playing status.

22. OSD
    OSD: on-screen display, OSD is on by default, displaying current playing time and mode.

23. PREV/NEXT
    PREV/NEXT button applies for DVD, Super Video CD, VCD, CD, CD-G, HD-CD, WMA, AVI, and MP3/JPEG.

24. Press the NEXT button to skip the next file.

25. Press the PREV button to skip the previous file.

  *  **Note** : In case of playing Super Video CD and “PBC” off, press the NEXT button would stop playing if the current song is the last; In case the current song is the second song, press the PREV button would stop. PREV/NEXT button would be void if a current song has stopped; In the case of a DVD, the result may vary depending on the different structures of the disk.

20. VOL+/VOL-
    VOL+/VOL- button applies for DVD, Super Video CD, VCD, CD, CD-G, HD-CD, WMA, AVI, and MP3/JPEG.
    Note:
    

  * You can also adjust the volume via the Volume button on the TV or Amplifier.
  * Press VOL+ to volume up, and press VOL- to volume down.
  * Volume is non-adjustable when playing DVD source code output.

21. MUTE
    The MUTE button applies to DVD, Super Video CD, VCD, CD, CD-G, HD-CD, WMA, AVI, and MP3/JPEG. Press the MUTE button to close the sound output, TV screen displays MUTE; Press the MUTE button again or the VOL+/VOL- button to open the sound output.

22. SLEEP
    Press the SLEEP button to enable Sleep mode, LCD screen on the device will light off; Press the SLEEP button again to restore to normal working status.

23. REPEAT
    Loop selected chapters, folders, or whole disks.

  * Repeat ONE Press the REPEAT button for the first time to repeat the current chapter.
  * Repeat ALL Press the REPEAT button for the second time to repeat the whole disk.
  * Shuffle Play Press the REPEAT button for the third time to Shuffle Play the chapter.
  * Normal Play Press the REPEAT button for the fourth time to end the repeat.

24. FM
    Press the MODE button on the remote control or the topside MODE button on the device to switch to FM mode when the device is on; Press the PLAY/PAUSE button or keep pressing the “NEXT” button(on the device) for about 2 to search video channel, and once searching out, it would stop at the current channel

25. CD COPY/Transcription
    Connect the DVD player to the TV or LED Display, Press the SUB-T button, then choose the TRACKS and select the Track number. After selecting, choose START, will start to copy the CD music onto the USB, you can see a progress bar, when you finish the copy, please choose CANCEL to end the copy. Finally, choose QUIT to quit the Copy Mode.

26. MP3
    This device is compatible with CD-R, CD-RW, DVD-R, DVD-RW, DVD+ R, and RVD+WR with MP3/WMA file, and support disk with multiple catalogs. Other functions: When playing an MP3 disk, MUTE, VOL+/VOL-, PLAY/PAUSE and PREV/NEXT buttons work the same way as playing other disks.

27. AVI、 XVID
    Put a disk containing an AVI or XVID file, the device would auto-search and enter into the option interface.

  * Press the UP/DOWN button to choose the catalog or file name; Press the OK button or PLAY/PAUSE button to enter into the selected catalog and play the selected file.
  * In a normal playing state, press the STOP/RETURN button to stop playing and return from the catalog option interface.

28. Setting
    Regular setting : Press the SET button to go into the system setting interface

  * Press the UP/DOWN button to choose and the OK button to confirm;
  * Press again to return from the system setting.
  *  **TV system**
  *  **Normal/Full screen:**  

When connected to a normal TV, it would display a wide screen with part of the screen automatically cut(auto system is recommended).

  *  **Screen Protect:**  

Screen protect function is available and recommended to enable.

  *  **High-resolution output:**  

HDMI output is optional.

  *  **Screen aspect ratio:**  

Choose a screen aspect ratio depending on different TV sizes.

  *  **Memory function:  

** Memory function is on by default; When a player is under normal playing state, in case of power down, it would restore to its last stop position and play when powered on again. This function can be turned on/off.

29. TIMER
    When the device is on, the LCD screen will display 00:00 when pressing the TIME button. For example, set to 07:30: TIME 00:00 OK↑ 07 → ↑ 30 OK.

30. TIMER

  *  **ON Timer**  

When the device is on, press the On Timer button, LCD screen will display 00:00(display the original alarm clock time after reset).
For example, set to 07:30: ON Timer 00:00 OK ↑ 07 → ↑ 30 OK;
LCD screen would display（the ON ） icon afterward, press this button twice to cancel the ON Timer.

  *  **OFF Timer**  

When the device is on, press the OFF Timer, LCD screen will display 00:00 (display the original clock alarm clock time after reset). For detailed operation steps, please refer to the relevant paragraph in ON Timer. LCD screen would display （ off）icon afterward, press this button twice to cancel the OFF Timer.

31. MODE
    When the device is on, the default mode is Disc; Press the MODE button on the remote control, and the displayed mode will be disc, USB, FM, and blue mode; the LCD screen will display relevant abbr. when switching mode.

32. A-B
    Press the A-B button on the remote control for the first time to choose the start point, and press A-B again to choose the end point; Then the device will repeat the selected content. Press A-B again will end the A-B functions.

Installation tip
Fix the wall-mounted plate on the wall with the included 3 nails; Or fix it on the wall with the included 4 screws; Hang the DVD Player on the wall-mounted plate.

Maintenance

1. Please keep the device in place with enough airflow, and avoid place subject to direct sunlight, extreme heat, or moisture; Please use a cloth dipped in diluent detergent to clean the device, and avoid strong solvents, like alcohol, benzene, or thinner;
2. Use a clean and soft cloth to wipe the disk from the central area to the outside;
3. Avoid putting the disk in place subject to heat while cleaning; Do not bend the disk, and no sticker should be attached; Put it back into its storage case to avoid being scratched.
4. After using it for a long time, in case laser lenses get dirty and cause sound stuck, please use a camera lens brush to clean dust, and use a hair dryer(set to cold wind) to blow it for a while, Or use a clean cotton bud dipped with a small amount of anhydrous alcohol to wipe laser lenses, then use a clean cotton bud to wipe it.

Troubleshooting

Unable to play

| The disk was not properly placed| Keep the cover side upwards and place the disk again
Incompatibility issue| Replace with another compatible disk

No sound output

| Wrong operation| Follow instructions in the user manual when operating
Volume setting low dirty| Volume up

Sound stuck

| Disk or laser lenses get dirty| Clean disk or laser
The disk got scratched or curved| Replace the disk

After-sales Warranty Policy
From the date of its original purchase, provide 12 12-month limited warranty, for malfunction caused by non-man-made factors, we would be responsible for replacement or refund at no extra charge.

Non-Warranty Provisions

1. The malfunction and damage caused by incorrect use, unauthorized repairs, misuse, modification, improper use of supplied power accessories, and alteration of tamper proof sticker;
2. Expire warranty period;
3. The product malfunction and damage caused by force majeure;
4. The product malfunction was caused by incorrect operation.

Accessories:

Product Warranty

• Product name/serial number:
• Order number:
• User address:
• Malfunction description:
• Date of Purchase:
• Telephone:
• Maintenance log:

FCC Caution:

• Labeling requirements
  This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

• Changes or modification warning
  Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Information to the user

Note : This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF warning for Mobile devices:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>