BlueMarine Internal Skimmer 120 Protein Instruction Manual
- June 6, 2024
- BlueMarine
Table of Contents
Internal Skimmer 120
Instruction Manual
Instruction Manual
1. Air Flow adjusting valve.
2. Air tube
3. Water Flow adjusting valve.
4. Water pump.
5. Min. Max. water level indicator| 6. Collection cup
7. Water flow adjusting tool
8. Holding brackets
9. Adjustable Hang-on bracket
10. Mounting screw
---|---
Safety
- Read carefully before usage.
- The Internal Skimmer 120 is only suitable for indoor use.
- Ensure the voltage shown on the label match to the main supply voltage.
- Ensure that water cannot reach the socket.
- Never let the pump run dry, keep it submerged at all times.
- Disconnect skimmer from mains before any maintenance on your aquarium.
- If the cables of the pump is damaged, do not use the skimmer, recycle the damaged item and order a new pump at your dealer.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Special care should be taken with the use of electrical equipment by or near children.
Installation
- Make sure that the holding brackets (8) holding the front and rear cover are securely tightened.
- Make sure that the Hang-on bracket (9) is properly installed.
- Make sure that the air tubing (2) is properly connected to the pump
- Place the skimmer in the tank using the Adjustable Hang-on bracket (9) to make sure that the water level is higher than the minimum water level.
- First, turn the Water Flow adjusting valve (3) to maximum using the Water flow adjusting tool (7)
- Connect the power
- Turn down the water level adjusting valve (3) the bubbles will move to the bottom of the collection cup (6)
- Adjust the air intake by the Air Flow adjusting valve (1) Down (clockwise) Up (counterclockwise)
Maintenance
- Clean the skimmer at least once every 2 weeks.
- Replacing the filter sponge every 2 months is recommended
Recycle information
The symbol of the barred bin printed on the product means that it must be collected separately from other rubbish when it will not be anymore in use. The user, at the end of the life of the product, will have to bring it to a proper rubbish collection center for electric and electrical devices. Alternatively, he can return the used product to the seller at the moment he buys a new unit, but only in proportion 1 to 1, a differentiated refuse collection is environmentally friendly and it helps the recycling of the materials, any other collection procedure is unlawful and will be subject to the law in force.
Warranty
This warranty is valid for 2 years on materials and incorrect construction.
Only units with a fully filled-in warranty slip and official till receipt
showing the date of purchase will be considered. You must supply the entire
unit with accessories in the event of a warranty claim. We will inform you on
a receipt whether the unit will be repaired or replaced. We accept no
responsibility for
damage as a result of incorrect use of the unit. Breakages of parts not due to
defects ex-factory are not covered by this warranty.
Technical details
Model| Dimensions| Voltage| Power| Flow| Air-
intake| Aquarium size
---|---|---|---|---|---|---
Internal Skimmer 120| 90 x 50 x 220 mm| 230-240V/50hz| 3,5 W| 300 L/h| 100
L/h| <95 lt
10-2020-JM
Dealer stamp:
Date of purchase:
Always keep proof of purchase, without purchase note no warranty!
Produced in China for:
www.aquadistri.com
Vlietweg 8 NL-4791 EZ Klundert
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>