BlueMarine Reef 125 Fish Aquarium Instruction Manual
- June 5, 2024
- BlueMarine
Table of Contents
BlueMarine Reef 125 Fish Aquarium Instruction Manual
Parts
- Transit pipe
- Transit pipe with valve
- Overflow transit with coupling
- Outflow pipe
- Nozzle
- Overflow pipe
- Skimmer
- Pump hose with coupling
- Pump hose connector
SAFETY REEF
- Read then manual of the stand and accessories carefully before usage.
- Only suitable for indoor use.
- Before filling the aquarium with water, ensure that it is placed on a solid surface that can support the load.
- The aquarium must not be transported in filled state because of the risk of glass breakage (no warranty coverage).
Technical installation
STEP 1
Place the aquarium (15) on the cabinet, make sure the tank is aligned with
the cabinet.
Make sure the aquarium on its final position, so it’s not necessary to move
the aquarium anymore.
Make sure the aquarium is level.
STEP 2
Mount (A) the float (13) in the sump (16).
Place the sump in the middle of the cabinet against the backside.
STEP 3
Place the transit pipe (1), the outflow pipe (4) and the overflow pipe (6)
in the slots.
STEP 4
Fit the transit pipe with valve (2) and the overflow transit (3)
STEP 5
Screw the hose connector (9) into the pump (A).
Remove the filter cover (B) of the pump, it is not necessary with a marine
aquarium.
Slide the hose (8) onto the hose connector (9).
STEP 6
Place the pump (10) in the appropriate section of the sump.
STEP 7
Place the nozzle (5) on the outflow pipe (4).
Connect the hose (8) to the outflow pipe (4)
STEP 8
Place the filtersock (18) and the skimmer (7) in the appropriate sections
of the sump.
STEP 9
Assemble the water reservoirtap (12) on the water reservoir. Slide the
float hose (11) to the tap.
STEP 10
Place the water reservoir (17) on the sump. Connect the float hose (11) to the
float.
The position of the float can be adjusted with the adjusting screw (A).
STEP 11
Place the ProLED (14) on the aquarium and fixate it with the screws.
STEP 12
The aquarium is now ready for use.
STEP 13
Open the tap of the transit pipe and fill the tank until the maximum water
level has been reached in the sump.
STEP 14
Fill the water reservoir (17) with osmosis water.
WARRANTY CONDITIONS
This warranty is valid for 2 years on materials and incorrect construction. Only units with a fully filled in warranty slip and official till receipt showing date of purchase will be considered. You must supply the entire unit with accessories in the event of a warranty claim. We will inform you on receipt whether the unit will be repaired or replaced. Aquadistri shall accept no liability for glass breakage or damage caused by negligence, incorrect use, transportation, incorrect set-up or any subsequent modifications to the aquarium. No claims shall be assertible in excess of the value of the aquarium, in particular for damage to fish or plants.
RECYCLING INFORMATION
The symbol of the barred bin printed on the product means that it must be collected separately from other rubbish when it will not be anymore in use. The user, at the end of the life of the product, will have to bring it to a proper rubbish collection centre for electric and electrical devices. Alternatively he can return the used product to the seller at the moment he buys a new unit, but only in proportion 1 to 1. A differentiated refuse collection is environmentally friendly and it helps the recycling of the materials, any other collection procedure is unlawful and will be subject to the law in force.
Dealer stamp:
Date of purchase: ……………… / …………………. / 20 ……………..
Always keep proof of purchase, without purchase note no warranty!
Produced in China for:
www.aquadistri.com
Article
| Art| Load
---|---|---
REEF 125 ALUMINIUM STAND WHITE| 50x50x86 cm|
200 kg
REEF 125 ALUMINIUM STAND BLACK
| 50x50x86 cm|
200 kg
