BlueMarine Reef 120 Coral Tank Instruction Manual

: June 4, 2024
: BlueMarine

Table of Contents

Safety
SPECIAL SAFETY INSTRUCTION:
WARRANTY CONDITIONS:
RECYCLING INFORMATION:
Blue Marine Reef 120
PARTS
Technical installation
CONTROLLER
MAINTENANCE
TECHNICAL DATA
DIMENSIONS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Reef 120 Coral Tank
Instruction Manual BlueMarine Reef 120 Coral Tank Reef 120
Installation Manual

Safety

SAFETY BM REEF 120:

Read the manual carefully before using it.
Only suitable for indoor use.
Before filling the aquarium with water, ensure that it is placed on a solid surface that can support the load. Always use the supplied underlayer to prevent cracks in the glass.
The aquarium must not be transported in a filled state because of the risk of glass breakage (no warranty coverage).
Unplug the pump, skimmer, lighting, and any other electrical equipment from the wall outlet before working on the aquarium or in the water.
You need to follow the instruction for minimum and maximum water levels on the side of the tank.
Carefully read the instructions for all accessories first for proper use and safety.

SAFETY BM MARINE LED 42W

Only suitable for indoor use.
Ensure the voltage shown on the label match the mains supply voltage.
Never look directly at the LEDs! UV and Infrared (IR) emitted from this light may cause permanent eye and/or skin damage, always minimize exposure to eyes and skin, and the supplier is never responsible for any wrong usage of this light.
The mains cable of the light and all cables leading out of the aquarium must be provided with a drip loop to prevent any water which may run down the cables from reaching items of equipment or the mains socket outlet (see image).
Although the LED lamp is splash waterproof it should not be submerged in water and there should be at least 15 mm between the water level and the lamp. Attach the lamp firmly.
Only plug the light into the mains after the LED lamp is firmly mounted above the aquarium.
Always dry your hands before doing any jobs on the LED lamp or operating the lamp switch.
Always disconnect the electrical supply before you perform any maintenance on the aquarium and LED lighting.
The LED unit can get warm, allowing adequate time to cool down attempting any maintenance.
Make sure cable and light are undamaged before usage, If damaged the supply cord cannot be replaced, and the whole unit needs to be recycled. Never shorten or lengthen the electrical leads.
If overpowered, the adapter can be replaced, buy a replacement adapter from your dealer.
In the unlucky event that the LED unit falls into the water, first, unplug it and then retrieve it by using the cable to lift the unit out of the water.
The warranty is not valid when the unit is damaged due to submersing.

SAFETY BM REEFPOWER 600

Before use, read the manual supplied with the BM Reefpower 600.

SAFETY BM INTERNAL SKIMMER 200

Before use, read the manual supplied with the BM Internal Skimmer 200.

SPECIAL SAFETY INSTRUCTION:

This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instructions concerning the use of the appliance in a safe way and understand the hazards involved. Children may not play with the appliance. Cleaning and user maintenance shall not be done by children without supervision.

WARRANTY CONDITIONS:

This warranty is valid for 2 years on materials and incorrect construction. Only units with a fully filled-in warranty slip and official receipt showing the date of purchase will be considered. You must supply the entire unit with accessories in the event of a warranty claim. We will inform you on a receipt whether the unit will be repaired or replaced. Aquadistri shall accept no liability for glass breakage or damage caused by negligence, incorrect use, transportation, incorrect set-up, or any subsequent modifications to the aquarium. No claims shall be assertible in excess of the value of the aquarium, in particular for damage to fish or plants.

RECYCLING INFORMATION:

The symbol of the barred bin printed on the product means that it must be collected separately from other rubbish when it will not be anymore in use. The user, at the end of the life of the product, will have to bring it to a proper rubbish collection center for electric and electrical devices. Alternatively, he can return the used product to the seller at the moment he buys a new unit, but only in proportion 1 to 1. A differentiated refuse collection is environmentally friendly and it helps the recycling of the materials, any other collection procedure is unlawful and will be subject to the law in force.

Blue Marine Reef 120

PARTS

1 Tank
2 Skimmer (BM Internal Skimmer 200)
3 Controller (BM Internal Skimmer 200)
4 Pump (BM ReefPower 600)
5 Lighting
6 Adapter lighting
7 Pump hose connector| 8 Nozzle coupling
9 Nozzle
10 Pump hose
11 Glass cover brackets
12 Glass cover
13 Bottom protector
14 Sump cover
---|---

Technical installation

STEP 1
Place the tank (1) on the Bottom protector (13).
Place the aquarium on a smooth, horizontal surface with an adequate load- bearing capacity.
Do not place the aquarium on electrical appliances or on furniture with surfaces which are liable to staining by water.
Please note. The total weight of the setup: aquaria completely with water and additives (depending on the type of decoration) may be up to 180 kg.
STEP 2
Place the skimmer (2) in the third section of the internal sump.
Before using the BM Internal Skimmer 200, read the skimmer manual.
STEP 3 Place the pump (4) (BM ReefPower 600) in the right section of the internal sump.
STEP 4
Insert the nozzle coupling (8) from the inside through the appropriate opening and then install the nozzle (9).
STEP 5
Place the cover (14) on the sump.
STEP 6
Place the lighting (5) on the edge of the aquarium and Secure the lighting with the mounting screws
STEP 8
fill the tank and filter with seawater.
You need to adjust the water level in the back filter when the pump is running between the minimum and maximum lines.
STEP 9
Place the brackets of the cover (11) on the edge of the aquarium and place the glass cover (12) on the brackets.
The Reef 120 is now ready for use.
Manual BM MARINE LED 42W

CONTENTS
2 Plastic screws
1 Light fixture with controller
1 Power supply

CONTROLLER

Turns the light on and off
Switches between the 4 modes:
Mode 1 Control of White LEDs only (with +/-)
Mode 2 Control of Blue LEDs only (with +/-)
Mode 3 Sets the ratio between White and Blue LEDs with +/- (fixed at 100% by default)
Mode 4 The White/Blue ratio has been set in mode 3 and locked, and you can now control the brightness of the 2 channels together with +/
– Decreases brightness in modes 1, 2, and 4. In mode3, changes the brightness balance from white to blue: which means it increases the blue and decreases the white.
+ Increases brightness in modes 1, 2, and 4. In mode 3, changes the brightness balance from bleu to white: which means it increases the white and decreases the blue.

MAINTENANCE

Regular cleaning with a damp cloth ensures longer life and better light output.
The LED lighting has a service life of at least 30,000 hours.
The LEDs cannot be replaced individually; if LEDs stop working, the entire lighting unit must be replaced.