Zeeva SP-0762 Sound Machine Speaker with Bluetooth and White Noise Mode Instruction Manual
- June 6, 2024
- Zeeva
Table of Contents
- Product Overview
- Package Contents
- Power On/Off
- Technical specification
- Operation
- Pair Wireless speaker with your mobile device
- Reconnect Wireless speaker to your mobile device
- FAQ
- Safety instructions for the lithium battery and charging the product
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Instruction Manual
Thank you for purchasing the Sound Machine Speaker.
This manual provides more information about this wireless speaker,
please read the instructions before using it. 
Product Overview
Package Contents
Sound Machine Speaker×1
Instruction Manua× 1
Power On/Off
Power on Long press the Power Button once to turn on.
Power off
Long presses the Power Button once to turn off.
Note: Always power off the speaker when not in use.
Technical specification
Driver Diameter: 52 mm Impedance: 4 Ohms Bluetooth Range: 32.8 Feet
Powered by USB
Operation
When you turn on the Sound Machine Speaker, it will automatically connect to Bluetooth mode “. Long press the Mode Selection Button once and it will connect to ‘ White noise mode”
| Long press Mode Selection Button once | – Timer 15 mins |
|---|---|
| Then short press On/Off & Timer Button | – Timer 30 mins |
| 2nd press | – Timer 60mins |
| 3rd press | – Continue mode (Timer turn off) |
Next Sound / Volume Up button: Long press ( Next Sound)/ Short press ( Volume
up)
Previous Sound/ Volume Down button: Long press ( Previous Sound)/ Short Press
( Volume down)
Pair Wireless speaker with your mobile device
- Keep the distance between your Sound Machine Speaker and mobile phone (or other devices) within 32.8 Feet.
- Power on the wireless speaker.
- Activate the Bluetooth function on your phone within range and select ‘SOUND MACHINE’ from the list shown.
- You will hear a beep sound when pairing is successful.
Reconnect Wireless speaker to your mobile device
When powered on, the Sound Machine Speaker will automatically connect with the last successfully paired device.
FAQ
- If the Wireless speaker cannot be paired with your device, please try the following: Ensure that your speaker is in pairing mode or reconnection mode. Ensure that the Bluetooth search function of your mobile device is activated.
Safety instructions for the lithium battery and charging the product
– The input voltage to the product is DC 5V 1A.
– In order to operate the product in a safe manner and reliable conditions,
please only adopt a certified appropriate charger/ adapter for the product.
– Only charge the product at ambient temperatures between 10 deg °C! 50 deg °F
and 40 deg °0104 deg °E
– Do not heat above 70 deg °C1158 deg °F, eg. Do not expose to sunlight or
throw into fire.
– Switch off the product after use
– Please note that we won’t take any responsibility for any wrong operation
(eg. Voltage higher than 5V) as this may result in severe injury or loss of
property, and we cannot control the operating process during the time the user
using this product
FCC STATEMENT
- This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2)This device must accept any interference received. ducting interference that may cause undesired operation.
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device. pursuant to Pail 15 of the FCC Rules. These
Units are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy. if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications.
However. there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception. which can be determined by turning the
equipment off and on. the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced actor tedthidan for help.
RF warning statement The device has been evaluated to meet general RF exposure
requirements. The device can be used in portable exposure conditions without
restriction.
Keep All Relevant Information For Future Reference
ITEMS/ SP-0762
Made in China
| Approval: | Data: |
|---|
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>