ZEEVA LD-0003 LUMI+ Bluetooth Mood Light User Manual
- June 5, 2024
- Zeeva
Table of Contents
- ZEEVA LD-0003 LUMI+ Bluetooth Mood Light
- Product Overview
- Power On/Off
- Contents
- Specifications
- Control With Your Phone
- Pair The SMART LIGHT With Your Smartphone
- Control With Your Phone
- Batteries Installation For Smart Light
- IMPORTANT: BATTERY INFORMATION
- FCC Statement
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
ZEEVA LD-0003 LUMI+ Bluetooth Mood Light
Product Overview
Power On/Off
Power On/Off
Press the ON/OFF button once to turn on the LUMIN+ SMART LIGHT. Press the
ON/OFF button once to turn off the LUMIN+ SMART LIGHT.
Contents
- Lumin+ Smart Light x 1
- Instruction Manual x 1
Specifications
Power Supply: 3 x AAA 1.5V batteries (Not included)
Control With Your Phone
Use any of the below methods to download to the App:
Compatible With: iOS & Android
Method 1: Scan the QR Code for quick download. Method 2: Search and install “HappyLighting” Store or Google Play Store. Bluetooth device request: For Apple device, requires iOS 8.0 or later. For Android device, requires Android Ver 4.3 or later. iPod, iPhone, iPad and App Store are trademarks of Apple Inc. registered in the U.S. and other countries. AndroidTM , Google Play and the Google Play logo are trademarks of Google, Inc.
Pair The SMART LIGHT With Your Smartphone
- Power on the SMART LIGHT.
- Keep the distance between your SMART LIGHT and smartphone within 32.8 Feet.
- Activate the Bluetooth function on your smartphone and the lights will connect automatically.
Control With Your Phone
- Lamp List
- Color Wheel Mode
- On/OFF Button
- Brightness Control
- Mode Selection
- Settings
- Image Eyedropper Tool
- Adjustable Color Wheel
- Color preset
- Frequent used color &
- Classic colors
Batteries Installation For Smart Light
To install batteries into the Smart Light, open the battery box cover to access battery compartment. Insert 3 x “AAA” 1.5V batteries (Not Included) into the battery box. Batteries should be placed as shown on the diagram. Put back in place the battery box cover.
Notice:
When placing the batteries, you must insert according to the correct polarity,
the Smart Light won’t function if batteries are reversed.
IMPORTANT: BATTERY INFORMATION
- TO AVOID BATTERY LEAKAGE
- Always follow the instructions carefully. Use only batteries specified and be sure to insert them correctly by matching the + and – polarity markings.
- Do not mix old batteries and new batteries or standard (carbon-zinc) with alkaline batteries.
- Remove exhausted or dead batteries from the product.
- Remove batteries if product is not to be played with for a long time.
- Do not short-circuit the supply terminals.
- Should this product cause, or be affected by local electrical interference, move it away from other electrical equipment. Reset (switching ON & OFF again or removing and re-inserting batteries) if necessary.
FCC Statement
This device complies with the part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with instructions may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. The user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or experienced radio/ TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>