Ningbo Youdian Electonic Technology X10 Magnetic Wireless Charger User Manual
- June 6, 2024
- Ningbo Youdian Electonic Technology
Table of Contents
Ningbo Youdian Electonic Technology X10 Magnetic Wireless Charger User
Manual
Preface
Thank you for purchasing products. For optimum operation, please read this
manual carefully before using.
Package Contents
-
1 × Magnetic Wireless Charger
-
1 × User Manual
-
1 × Warranty Card
How it works
According to different objects, it can be divided into the following three different use methods, and the reading order is as follows:
Mobile phone charging: ①, ②; Watch charging: ①, ③; Headphone charging: ①, ④.
-
Connect the product to power outlet.
-
Place your iPhone closely to snap on the product.
-
Place your Watch closely to snap on the product.
-
Place your Wireless headset closely to snap on the product.
Precautions
- This product works with all wireless charging products.
- This product is only suitable for original Apple cases with Magafe or Magsafe-compatible cases by KPON.
- Do not put such magnetic objects as metal, magnetic strip card, credit card, public transport card, phone card, etc. beside the charging area of wireless charger to avoid abnormal charging or product damage.
- Keep away from direct sunlight or any high-temperature enviroments and away from heat-emitting devices such as space heater and microwave.
- Do not strike or throw the product. The improper behaviors will damage the interior circuit board.
- Do not expose to any liquids or operate in humid environments.
- For the purpose of repairs or disassembles, please contact to KPON after-sale service.
Product Features
Input
|
5V⎓2A 9V⎓2A
---|---
Output
| 3W/5W/7.5W/10W/15W(MAX)
Size|
φ58mmX6.8mm
（Note: The specific charging power depends on the charging standard of
the
equipment）
FCC Note
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation
This device has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential
installation. This device generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular
installation. If this device does cause harmful interference to radio or
television
reception, which can be determined by turning the device off and on, the user
is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the device and receiver.
- Connect the device into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
The distance between user and products should be no less than 20cm.