Aqara A100 Smart Door Lock User Manual

Aqara A100 Smart Door Lock User Manual

Product Overview

Aqara Smart Door Lock A100 can be unlocked with fingerprint, password, temporary password, NFC card, APP control, Apple Home Key, and (emergency) mechanical key.

It supports functions such as low-battery reminder, lock pry warning, repeated verification failure warning, door unclosed/unlatched warning, and etc.

Working with Aqara family of devices, the Smart Door Lock A100 becomes an integral piece in various smart user scenarios, providing improved safety and enhanced smart home experience.

A hub is required for automations and other functions.

Front handle

• Press and unlock: Pull down the handle to unlock after successful verification.
  

• Lift and lock: Lift up the handle (required for safety)
  

Keyhole cover

1. Press the bottom of the cover

2. Remove the cover after it pops up

Note: Emergency power supply is available in case that the door lock failed to be unlocked due to battery running out.

Back handle

• Press and unlock: Pull down the handle to unlock the door
  

• Lift and lock: Lift up the handle to lock the door
  

“Night latch” knob

1. Rotate 90° clockwise or

2. counterclockwise

Lock Installation

Please hire professionals to install the lock as the dangerous professional tools should be used in the process of installation.

Scan the code to check the electronic instruction and more.

Preparation for Use

1. Please open the battery cover and install 8 AA dry batteries.
   
   Note: It is recommended to use original batteries as others may leak and thus cause damage to the product when used for a long time.
   [Warning] Please replace the battery timely when it is low, otherwise the power running out will lead to the failure to open the door by authentication. In this case, you can use the Type-C emergency power supply or the mechanical key to unlock.

2. Press and hold the “Reset” button for 5 seconds, release it after hearing the voice prompt, and so the resetting is finished.
   Note: The user information will be cleared after resetting thus the door will be unable to be locked. Please finish the door lock setting according to this instruction as soon as possible.

Quick Setup

1. Add the device to the Aqara Home app
   Aqara Home app supports all the exciting functions of A100, and connects it to Aqara family of smart devices. You can download “Aqara Home” from Apple App Store, Google Play, Xiaomi GetApps, and etc. OR scan the QR code below. Open the app, tap “+” in the upper right corner of the “Add Accessories” page. Choose “Smart Door Lock A100” and then follow instructions to add the device.
   
   Note: The effective communication range of Bluetooth is 10 meters, but it may be affected by obstacles such as walls.
   Due to the upgrade and update of Aqara Home, practical operations may differ from the above description. Please operate following the instructions of the Aqara Home app.

2. Add users
   Enter the device page and follow the instructions of the app to add the first user who is the owner by default.
   Note: The door lock cannot be locked normally without users added.

3. Add the device to HomeKit (for iOS users)
   There are two ways to add A100 to HomeKit:

4. Open Apple’s Home app, click “+” in upper right corner, select “Add Accessory”

5. In the smart lock page in Aqara Home app, go to “General Settings”, click “Bind with HomeKit”, scan/input HomeKit setting code according to prompt (you can find your lock’s HomeKit code after opening the battery compartment cover) HomeKit supports functions such as lock/unlock, automation setups, and door unclosed/unlatched warnings

6. Add Apple Home Key (for iOS users)
   Afer your lock has connected with HomeKit, you can find an automatically generated key in your Apple Wallet app. iPhone/Watch can be used as devices to activate Apple Home Key by putting them into range of A100.

User Instructions:

1. This device works with HomeKit technology. Controlling this HomeKit-enabled accessory away from home or for automation would require an Apple Home hub, which is an Apple TV (generation 4 with tvOS 12.0+), an iPad (with iOS 12.0+) or a HomePod. An Apple user device, iPod/iPhone/iPad with iOS 12.0+ is also required.
2. In order to use Apple Home Key, your need an iPhone with iOS 15.0+ OR a Watch with watchOS 8.0+.
3.  Use of the “Works with Apple HomeKit” badge means that an accessory has been designed to work specifically with the technology identified in the badge and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
   

How to Use

Successful authentication: Interactive indicator flashes in white with the authentication sound prompt in case of no silent mode enabled.

Authentication failed: Interactive indicator flashes in red with failed sound prompt in case of no silent mode enabled.

Unlock by Fingerprint

1. Attach the finger to the fingerprint identification area.

2. After passing the authentication, pull down the handle to open the door.

Unlock by Password

1. Enter the password and press the Enter button.

2. After passing the authentication, pull down the handle to open the door.

Unlock by Emergency Key

1. Press down to open the cover plate of the emergency keyhole.

2. Insert the key and turn it to unlock.

Note: Do not put the emergency key in the house, but keep it in a safe and accessible place for the use in case of emergency.

Unlock by NFC Card

1. Hold the added card to the recognition area.

2. After passing the authentication, pull down the handle to open the door.

Lift and Lock from Indoor/Outdoor

1. Indoor: Lift up the handle after closing the door.

2. Outdoor: Lift up the handle after closing the door.

Note : For maximum security, please ensure to lif up the handle to lock when you are in or out.

Double Lock from Inside Using the “Night Latch”

1. Engage Double Lock: Turn the knob 90° clockwise or counterclockwise to the horizontal direction to enable the double lock.

2. Release Double Lock: Turn the knob 90° clockwise or counterclockwise to the vertical direction to disable the double lock.

Note: When double locked is engaged, A100 cannot be unlocked by regular users’ permissions (fingerprints/passwords/NFC cards) and mechanical key. However, it can be unlocked by admin users’ permissions, app controls, and Apple Home Key.

When you pull down handle from inside, the door also unlocks.

For more use instructions and product information, please scan the QR code in the Chapter “Door Lock Installation”, or operate as guided by the app.

Local Settings Mode

In case of any inconvenience to use Aqara Home app, briefly press the “Setting” button under the battery cover of the door lock, verify admin’s fingerprint/password to set up the following:

1. Add/remove normal users
2. Set the door lock volume
3. Reset and bind to HomeKit
   Note: Prior to entering the local setting mode, please finish the operation of adding the door lock and users through Aqara Home app.

Specifications

• Name: Smart Door Lock A100
• Dimensions: 375×77×23.6 mm
• Operating Temperature: -25˫~55˫
• Operating Humidity: 0~93% RH, no condensation.
• Model: ZNMS02ES
• Net Weight: 3.6 kg
• Power Supply: 8 AA dry batteries (6V ),
• Type-C Emergency Power Supply (5V )
• Wireless Protocol: Bluetooth 5.0, Zigbee, NFC

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Lumi United Technology Co., Ltd. is under license. Other trademarks and trade names are those of their respective owners.

Please read this manual carefully before using the product and keep it properly.

Online Customer Service: www.aqara.com/support
E-mail: support@aqara.com
Manufacturer: Lumi United Technology Co., Ltd.
Address: Room 801-804, Building 1, Chongwen Park, Nanshan iPark, No. 3370, Liuxian Avenue, Fuguang Community, Taoyuan Residential District, Nanshan District, Shenzhen, China
See www.aqara.com for more information of the product.

References

• Aqara - Smart Home Automation Devices for Better Living
• Aqara Smart Device Product Support

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>