Omni OC32 Sharing Bike Smart Lock Instruction Manual
- June 6, 2024
- Omni
Table of Contents
Sharing bike smart lock manual
-
Introduction
This is a smart lock for sharing bike, it communicates with smartphone APP by GPRS, GPS, BLE4.0 to unlock, Cloud server computes the time and payment automatically. -
APP installation &account register
1. Please download the APP software from the Operator Company office web according to the user’s smartphone operating system and install it.
2. User register account and log in by the phone number(normal using), this operating step needs phone connecting to the network.
3. Pay the deposit. -
Unlock/lock operating instruction.
1. Open the Bluetooth of the phone.
2. Start the APP, press the button of QR code at the bottom of APP UI, enter into the scanning QR code page, and aim at the QR code on the bike lock, when the phone read the QR code information, it will unlock automatically and go into unlocked status.
3. Lock manually after finishing using the bike, when Cloud Server receives the locked info, time computing stop, and fee deduction. -
smart lock needs to work with smartphone, phone hardware circumstance requests as below:
Android 4.3 以上，4.0BLE, 1280×720；IOS 7.1 以上，iPhone 4s 以上。
Above Android 4.3 version, hardware supporting Bluetooth 4.0BLE, the best screen resolution 1280×720;
Above IOS 7.1 version and iPhone 4s model. -
APP UI introduction
home
page
scanning QR code page
unlocking and using bike page
finish using the bike and fee deduction page.
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
‐‐ Reorient or relocate the receiving antenna.
‐‐ Increase the separation between the equipment and receiver.
‐‐ Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
‐‐ Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
The antennas used for this transmitter must be installed to provide a
separation distance of at least 20 cm from all persons and must not be
co‐located for operating in conjunction with any other antenna or transmitter.