elo E-Series 2 AiO Touchcomputer Installation Guide
- June 6, 2024
- elo
Table of Contents
Quick Installation Guide
E-Series 2
Touchcomputer
Revision A
P/N E377507
Included items:
1x E-Series 2 Touchcomputer
1x Power Cable US/Canada
1x Power Cable Europe
1x 180W Power Adaptor
1x Quick Install Guide
1x Cable Management Kit
Please go to www.elotouch.com/support to verify you have the latest drivers before installing this device.
1. Connect the power adaptor.
2. Make
additional connections from the back of the Touchcomputer.
3. Make additional connections from the bottom of the stand
module.
4 Route the cable with a cable management kit. Press the power button to turn on the Touchcomputer.
Learn more about Elo at EloTouch.com
Americas
Tel +1 408 597 8000
EloSales.NA@elotouch.com
Europe (EMEA)
Tel +32 16 930 136
EMEA.sales@elotouch.com
Asia Pacific
Tel +86 (21) 3329 1385
EloAsia@elotouch.com
The information in this document is subject to change without notice. Elo
Touch Solutions, Inc. and its Affiliates (collectively “Elo”) make no
representations or warranties with respect to the contents herein and
specifically disclaims any implied warranties of merchantability or fitness
for a particular purpose. Elo reserves the right to revise this publication
and to make changes from time to time in the content hereof without the
obligation of Elo to notify any person of such revisions or changes.
No part of this publication may be reproduced, transmitted, transcribed,
stored in a retrieval system, or translated into any language or computer
language, in any form or by any means, including, but not limited to,
electronic, magnetic, optical, chemical, manual, or otherwise without prior
written permission of Elo Touch Solutions, Inc.
Elo and the Elo logo are either trademarks or registered trademarks of Elo
Touch Solutions, Inc. © 2021 Elo Touch Solutions, Inc. All rights reserved.
www.EloTouch.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>