elo E245047 2D Barcode Scanner Installation Guide

June 9, 2024
elo

elo E245047 2D Barcode Scanner

elo E245047 2D Barcode Scanner

Elo Technical Support
Online self-help: www.elotouch.com/support

elo E245047 2D Barcode Scanner 1

America
800-ELO-TOUCH
Tel +1 408 597 8000
EloSales.NA@elotouch.com

Asia-Pacific
Tel +86 (21) 3329 1385
EloAsia@elotouch.com

Europe( EMEA)
Tel +32 (0)16 930 136
EMEA.Sales@elotouch.com

The information in this document is subject to change without notice. Elo Touch Solutions, Inc. and its Affiliates (collectively “Elo”) makes no representations or warranties with respect to the contents herein, and specifically disclaims any implied warranties of merchantability or fitness for a particular purpose. Elo reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation of Elo to notify any person of such revisions or changes.

No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, including, but not limited to, electronic, magnetic, optical, chemical, manual, or otherwise without prior written permission of Elo Touch Solutions, Inc.
Elo and the Elo logo are either trademarks or registered trademarks of Elo Touch Solutions, Inc.

Installation

Please go to www.elotouch.com/support to verify you have the latest drivers before installing this device.

  1. Select location to mount the barcode scanner.
    Elo recommends the bottom location in either portrait or landscape.

  2. Remove the selected peripheral cover from the touch monitor.

  3. Gently insert the barcode scanner into the peripheral bay taking care to ensure the connector mates properly.elo E245047 2D Barcode Scanner 2

  4. Install the 2 screws included with the kit.

elo E245047 2D Barcode Scanner 3

Windows Systems
Please visit the following website to download and install 123scan: https://myelo.elotouch.com/support/s/developerportal

Android Systems
The Elo Barcode Scanner is ready to use in its default mode. The scanner default is:

  1. SNAPI interface
  2. Presentation Mode
  3. Beep on scan
  4. Set up to read the most common codes

elo E245047 2D Barcode Scanner 4

For additional settings and configuration options, please visit the product page on www.elotouch.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals