elo E353758 mPOS Flip Stand Instruction Manual

June 9, 2024
elo

INSTALLATION INSTRUCTIONS:
E353758 / E949536 mPOS PRINTER STAND WITH
EXPANSION MODULE FOR ANDROID

E353758 mPOS Flip Stand

  1. Remove (2) screws (L & R side) and pull-out printer tray. Keep screws for reassembly.

  2. Place Expansion Module into base.

  3. Route cables behind L & R sides of stand plate. Secure cables to stand with tie-wraps; white band on cables indicates correct location to secure cables.

  4. Re-assemble printer tray using (2) screws, L & R side.

  5. Attach 15i/10i using (4) M4X6L screws. Plug in USB and PWR. cables, attach cable doors. ****

  6. Insert compatible printer. (If adding optional rear-facing touch monitor ET1002L, go to step 7 before installing printer).

VESA Plate Cover Assembly for E949536 (Optional)

NOTE –VESA Plate Cover is optional for the assembly, it will not affect the function and performance.

QIG600035 Rev. D

Documents / Resources

| elo E353758 mPOS Flip Stand [pdf] Instruction Manual
E353758 mPOS Flip Stand, mPOS Flip Stand, E353758 Flip Stand, Flip Stand, Stand, E353758, E949536
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals