elo E847771 QIG Wallaby POS Stand for X Series Instructions
- June 9, 2024
- elo
Table of Contents
elo E847771 QIG Wallaby POS Stand for X Series
INSTALLATION INSTRUCTIONS
-
Add 15X using (4) M4 x 8L screws provided with stand.
-
Route cables from 15X through cable clips, add cable ties provided.
For mounting rear-facing display 1002, go to step 4 For adding printer, continue to step 2 -
Attach cables to printer and place into stand.
-
Remove 3 covers; push off using screw driver from behind.
-
Add (2) screws to top VESA mount holes on back of 1002.
-
Route cables through clip.
-
Route 1002 cables through stand bottom hole, add 1002 to stand top holes. Tighten (2) screws.
Return to step 1 for mounting 15X and printer.
QIG, Wallaby POS Stand for X-Series E847771
For more information, go to
www.elotouch.com/support, or call the
office nearest you. Elo reserves the right to change or update, without
notice, any information contained herein; to change, without notice, the
design, construction, materials, processing or specifications of any products;
and to discontinue or limit production or distribution of any products. Elo,
the Elo logo and Wallaby are either trademarks or registered trademarks of Elo
Touch Solutions, Inc. All other trademarks are the property of their
respective
owners. © 2018 Elo Touch Solutions, Inc. All rights reserved.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>