GARMIN IXWW22 PCB Module User Guide
- June 6, 2024
- Garmin
Table of Contents
- GARMIN IXWW22 PCB Module User Guide
- Product Outline
- Main Characteristics
- Memory
- Description
- Bluetooth
- Federal Communication Commission Interference Statement
- RF exposure warning
- Industry Canada statement
- Read More About This Manual & Download PDF:
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
GARMIN IXWW22 PCB Module User Guide
Product Outline
Main Characteristics
Operating temperature
range
| From -30° to 80°C
---|---
Input voltage| From 9 to 16V
Maximum Operating
Current
| 400mA @12V
Memory
External Flash | 64MB(512Mb) |
---|---|
External RAM | 16MB(128Mb) |
Description
IXWW22 is a PCB module with a 4.2“ color TFT to display infotainment vehicle data via CAN and navigation information from smartphone app via Bluetooth .
Bluetooth
Bluetooth v2.1+EDR, v4.2 BLE, Support SPP profile
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
-Reorient or relocate the receiving antenna
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this
equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received ,including interference that may cause undesired operation.
RF exposure warning
End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
Industry Canada statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference
- This device must accept any interference, including interference that may cause undesired operation off the device.
Canada, Industry Canada (IC) Notices
This Class B digital apparatus complies with Canadian ICES-003 and RSS-210.
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
Radio Frequency (RF) Exposure Information
The radiated output power of the Wireless Device is below the Industry Canada
(IC) radio frequency exposure limits. The Wireless Device should be used in
such a manner such that the potential for human contact during normal
operation is minimized.
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>