LYPERTEK LPT04 Hybrid ANC TWS Earbuds User Guide

LYPERTEK LPT04 Hybrid ANC TWS Earbuds

Buttons

1. INSIDE LED INDICATOR: Blue/Red blicking-Pairing Blue – connected Red – Earbuds are undercharging
2. RESET BUTTON: press and hold for 2~7second – Enter pairing mode
   press and hold for .8 second- Reset

CONTROL

CHARGING

≥10%~100% The blue light flashes 3 times with an interval of 1s
≥1%~≤10% The red light flashes 3 times with an interval of 1s

WHAT IS INSIDE?

1. PUREPLAY Z5
2. charging case
3. XS, S, L, XL Silicone Tips
4. USB type c cable
5. quick start guide
6. Thank You Card

DECEIVE LAYOUT

1. Case led indicator
2. type c charging port
3. Earbuds Status LED Indication
4. Touch Control Area
5. microphone
6. wireless charging

HOW TO PAIR?

1. Put PUREPLAY Z5 into the Charging Case
2. close the charging case
3. Open the Charging Case, PUREPLAY Z5 will enter Bluetooth Pairing Mode Automatically
4. Select LYPERTEK Z5 from the DEVICES List in the phone
5. connected

HOW TO WEAR ?

1. Choose the suitable eartips
2. Insert PUREPLAY Z5 into the ears
3. twist slightly until it fits well

FCC Statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
  The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>