Packed Party Earbuds User Guide: Learn How to Connect & Pair PKTW200 Wireless Earbuds
- June 6, 2024
- packed party
Table of Contents
The Packed Party PKTW200 Wireless Earbuds User Guide provides users with detailed instructions on how to connect and pair their earbuds. The guide includes step-by-step instructions on setting up the device, powering on and off, and unpairing. It also provides information on the device’s functionality, including in-ear detection and adjusting volume using a smartphone. The guide also includes specifications for the PKTW200 model, such as speaker diameter and impedance, sensitivity, and battery life. Additionally, the guide includes a warning about listening to loud audio for extended periods of time and FCC compliance information. For customer support, users can email support or call customer service during business hours. The guide also includes frequently asked questions about wireless earbuds, such as how long they last and the difference between earbuds and earphones. Overall, the Packed Party PKTW200 Wireless Earbuds User Guide is a comprehensive resource for users looking to get the most out of their earbuds.
packed party PKTW200 Wireless Earbuds User Guide
packed party PKTW200 Wireless Earbuds User Guide
What’s in the Box
Setting Up Your Device
Step l: Place your earbuds into the charging case for initial activation and charge your device using the included charging cable.
Step 2: Once fully charged, open the charging case. Your earbuds will
enter pairing mode automatically.
On your smartphone, search for the Bluetooth® device named “Turn It Up
Wireless Earbuds” and tap to connect.
Powering On/Off and Unpairing
Powering On
Removing your earbuds from the charging case will connect them to the last
paired device.
Powering Off
Placing your earbuds in the charging case and closing the lid will turn off
and disconnect your earbuds from the last paired device.
Pairing and Unpairing
To unpair your earbuds from the previously connected device, turn Bluetooth®
off on your device. Place the earbuds in the charging case with the lid open
to pair to a new device.
Functionality
In-Ear Detection
Both earbuds will auto-pause when you remove them from your ears.
Adjust the volume using your smartphone.
Charging Your Device
Use the included charging cable to connect your device to a power source such as a battery pack, laptop or car device
The Specifications
- Model: PKTW200
- Speaker Diameter: 0.4″
- Speaker Impedance: 32 Q ± 15%
- Sensitivity: 102 ± 3 dB at 1 KHz
- Speaker Driver Rating Power: 3 mW
- Charging Cable: 9.06″
- Input: 5V DC = 0.5 A
- Battery: 3.7 V, 250 mAh, 1 Wh
- Playback: 6 hours (at 50% volume)
- Waterproof Rating: IPX5 water resistant & sweatproof
(rating applies to the earbuds – not the charging case) FCC ID: 2AVRVPKTW200
WARNING: Listening to loud audio for extended periods of time may damage your hearing permanently.
FCC Warning
This device complies with Port 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept ony interference received, including interference that may cause undesired operation.
Caution: Changes or modifications to this product not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to port 15 of the FCC Rules. These limits ore designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
Need Help?
For customer support regarding your device,
please submit a request by emailing support@dpaudiovideo.zendesk.com. You will
be provided a ticket number regarding your inquiry, which you can refer to
when contacting us further.
You may also reach a DPAV customer service representative by calling 1-833-909-2673. We are available Monday – Friday, 9am – 5pm PST, except major holidays. DPAV strongly urges customers to email their inquiry prior to calling, as this will enable us to better assist you.
Please make sure to note the model number and a description of your inquiry.
Thank you for purchasing a Packed Party product.
Designed in Austin, Texas. Made in China. All designs © 2022 Packed Party, Inc. © 2022 DP Audio Video LLC. All Rights Reserved. USB is used to solely describe the compatibility of our technology and in no way is intended to infringe on any intellectual property rights of any respective protected marks.© 2022 Bluetooth SIG, Inc. All rights reserved. The Bluetooth® trademarks-including the BLUETOOTH word mark, the figure mark (the runic “B” and oval design), and the combination mark (Bluetooth word mark and design)-are owned by the Bluetooth SIG. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: ( 1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 1 year warranty from date of purchase, 90 days only on labor. Manufactured/imported by DP Audio Video LLC. Distributed by DP Audio Video LLC. Los Angeles, CA. 3205 Industrial Terrace, Suite 200, Austin, Texas 78758. Packed Party is a registered trademark of Packed Party, Inc.
FAQS
Are packed party headphones waterproof?
Packed Party “Spot On” Bluetooth Wireless Earbuds with Built-in Microphone + Charging Case, IPX5 Water Resistant
How do I pair my device?
Your earbuds will enter pairing mode automatically once they are removed from the charging case. On your smartphone, search for the Bluetooth® device named “Turn It Up Wireless Earbuds” and tap to connect.
How do I charge my device?
Use the included charging cable to connect your device to a power source such as a battery pack, laptop or car device.
How do I adjust volume?
Adjust volume using your smartphone or other mobile device.
How do you pair clear buds?
To pair the Clear Buds, individuals are asked to press onto the left and right buttons simultaneously until red and blue LED lights are alternated twice. Individuals will know when it is ready, as a voice prompt will eventually come up
Are wireless earbuds worth it?
True wireless earbuds offer unprecedented freedom of movement and a uniquely satisfying listening experience, but there are still a lot of issues plaguing this new technology, not least of which are its exorbitant price and short battery life.
What is the difference between Bluetooth and wireless earbuds?
The primary difference lies in how the headphones connect to a media player. While Bluetooth headphones use short-range radio waves to transmit audio signals, wireless headphones can use radio waves, infrared, internal memory, or KleerNet.
Why is my Soundcore not connecting?
If your device is out of range of your speaker, they will not be able to maintain a Bluetooth connection. Remove any obstacles between the speaker and your device, and move your device as close as you can to your ANKER SoundCore and try to pair again.
How do you put Anker Soundcore in pairing mode?
If you want to connect the Anker Soundcore to another device, the first step is to shut off your device’s Bluetooth [1]. Next, return your speakers to pairing mode manually: Press the Bluetooth button on the top of the speaker. The blinking blue LED light means the Anker Soundcore is ready to pair.
What devices work with the Soundcore app?
The Soundcore app currently only supports the following Soundcore devices: Flare / Flare+ / Flare S+ / Rave / Rave Mini / Mega / Trance / Wakey / Icon+ / Motion+ / Infini Pro / Model Zero / Model Zero+ / Liberty 2Pro / Liberty Air 2 / Liberty 2 / Life NC / PowerConf / Flare 2 / Rave Neo 2.
How many years do wireless earbuds last?
Wireless earbuds can last quite a long time when cared for property. Most can last somewhere between 2-3 years, while others can even last 5+ years. If an accident occurs, most manufacturers supply a great warranty.
How many hours do earbuds last?
Contrary to popular perception, the fact is that high-quality wireless earbuds provide as much as 5 hours of playtime without the case. In fact, the portable charging case has been quite a big improvement when it comes to power efficiency, with the talk or playtime going up to as much as 20 hours with the case.
Are wireless earbuds worth it?
True wireless earbuds offer unprecedented freedom of movement and a uniquely satisfying listening experience, but there are still a lot of issues plaguing this new technology, not least of which are its exorbitant price and short battery life.
What is the difference between earbuds and Earpods?
There’s one key difference between earbuds and earphones. Earbuds rest on the concha – the opening outside the ear canal. Earphones – also known as in-ear headphones – are inserted in the ear canal. While this may seem like a minor detail, one is better for comfort, durability, and sound quality.
Which is better earbuds or wireless earphones?
In terms of audio quality, headphones outperform earbuds at the same price point. Design plays a big part in this, as earbuds have much less space for internal components. For some, earbuds can also be uncomfortable, depending on how they fit your ear.
Which is better AirPods or earbuds?
Bluetooth earbuds can last for 6hrs of listening time per single charge and about 12 hours when charging. I recommend Airpods if you like listening to music or podcasts for a prolonged period of time because they provide a better listening experience overall.
How long do wireless earbuds last?
Wireless earbuds can last quite a long time when cared for properly. Most can last somewhere between 2-3 years, while others can even last 5+ years.