Shenzhen Powerqi Technology LC10 Magnetic Wireless Charger User Manual
- June 6, 2024
- Shenzhen Powerqi Technology
Table of Contents
Magnet Wireless Charger
User Manual
Thanks for choosing us!
This is a smart phone wireless charger that allows you to enjoy the fun of
digital products easily.
Please kindly read the user manual before using it and keep it for future
reference.
Specification
Input: DC5V 3A, DC9V 2.22A, DC12V 1.67A Charging distance: ≤10mm
Output: 5W/7.5W/10W/15W
Frequency: 115‒205 kHz
Dimension: Φ58.6×7.3mm
Conversion: ≥72%
NW.: 50g
Connect to Power Adapter
- Connect the power adapter to the socket.
- Connect the adapter to the Type-C interface.
*20W PD wall charger need to buy separately, please use the connector adapter according to your wall charger USB output port.
Charging Mode
- Make sure the wireless charger dock connects to the power supply.
- Put the magnetic wireless charging phone on the charger, they will align automatically.
The device also supports wireless charging to other nonmagnetic wireless charging function devices.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:(1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to
operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
FCC RF exposure statement:
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. During the operation of
the device, a distance of 15 cm surrounding the device and 20 cm above the top
surface of the device must be respected.
FCC ID: 2AFP2LC12C
Product Colour, Material & Finishing Specifications
Product Model| LC1 0| Brand| | Job No.|
---|---|---|---|---|---
Product Type| | Description| | Revision|
Dimension| 90*65rn rn| Original Designer| | Date| 2020.11.17
Scale| 1 :1| Technology| 128g| Venting|