EZVIZ DB2-CHIME Smart Wi-Fi Doorbell with Chime User Guide
- June 6, 2024
- ezviz
Table of Contents
Quick Start Guide
Scan the QR code with the EZVIZ App to add the device to your account.
Please keep it for further reference.
www.ezvizlife.com
COPYRIGHT © Hangzhou EZVIZ Software Co., Ltd.. ALL RIGHTS RESERVED.
Any and all information, including, among others, wordings, pictures, graphs
are the properties of Hangzhou EZVIZ Software Co., Ltd. (hereinafter referred
to as “EZVIZ”).
This user manual (hereinafter referred to as “the Manual”) cannot be
reproduced, changed, translated, or distributed, partially or wholly, by any
means, without the prior written permission of EZVIZ. Unless otherwise
stipulated, EZVIZ does not make any warranties, guarantees, or
representations, express or implied, regarding to the Manual.
About this Manual
The Manual includes instructions for using and managing the product. Pictures,
charts, images, and all other information hereinafter are for description and
explanation only.
The information contained in the Manual is subject to change, without notice,
due to firmware updates or other reasons. Please find the latest version in
the ™
website (http://www.ezvizlife.com).
Revision Record
New release – January, 2019
Trademarks Acknowledgement
and other EZVIZ’s
trademarks and logos are the properties of EZVIZ in various jurisdictions.
Other trademarks and logos mentioned below are the properties of their
respective owners.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH
ITS HARDWARE, SOFTWARE, AND FIRMWARE, IS ROVIDED “AS IS”, WITH ALL FAULTS
AND ERRORS, AND EZVIZ MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A
PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL
EZVIZ, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY
SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG
OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS
OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF
EZVIZ HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL EZVIZ’S TOTAL LIABILITY FOR ALL DAMAGES EXCEED THE ORIGINAL PURCHASE PRICE OF THE PRODUCT.
EZVIZ DOES NOT UNDERTAKE ANY LIABILITY FOR PERSONAL INJURY OR PROPERTY DAMAGE AS THE RESULT OF PRODUCT INTERRUPTION OR SERVICE TERMINATION CAUSED BY: A) IMPROPER INSTALLATION OR USAGE OTHER THAN AS REQUESTED; B) THE PROTECTION OF NATIONAL OR PUBLIC INTERESTS; C) FORCE MAJEURE; D) YOURSELF OR THE THIRD PARTY, INCLUDING WITHOUT LIMITATION, USING ANY THIRD PARTY’S PRODUCTS, SOFTWARE, APPLICATIONS, AND AMONG OTHERS.
REGARDING THE PRODUCT WITH INTERNET ACCESS, THE USE OF THE PRODUCT SHALL BE WHOLLY AT YOUR OWN RISK. EZVIZ SHALL NOT TAKE ANY RESPONSIBILITY FOR ABNORMAL OPERATION, PRIVACY LEAKAGE, OR OTHER DAMAGES RESULTING FROM CYBERATTACKS, HACKER ATTACKS, VIRUS INSPECTIONS, OR OTHER INTERNET SECURITY RISKS; HOWEVER, EZVIZ WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. SURVEILLANCE LAWS AND DATA PROTECTION LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. EZVIZ SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED FOR ILLEGITIMATE PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THE ABOVE AND THE APPLICABLE LAW, THE LATTER PREVAILS.
Regulatory Information
FCC Information
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Note: This product has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This product generates, uses, and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this product does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Please take attention that changes or modifications not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
This equipment should be installed and operated with a minimum distance of
20cm between the radiator and your body.
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may
cause undesired operation of the device.
Under Industry Canada regulations, this radio transmitter may only operate
using an antenna of a type and maximum (or lesser) gain approved for the
transmitter by Industry
Canada. To reduce potential radio interference to other users, the antenna
type and its gain should be so chosen that the equivalent isotropically
radiated power (e.i.r.p.) is not more than that necessary for successful
communication.
EU Conformity Statement
This product and – if applicable – the supplied accessories too are marked
with “CE” and comply therefore with the applicable harmonized
European standards are listed under the Radio Equipment Directive 2014/53/EU,
the EMC Directive 2014/30/EU, the RoHS Directive 2011/65/EU.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be
disposed of as unsorted municipal waste in the European Union.
For proper recycling, return this product to your local supplier upon the
purchase of equivalent new equipment, or dispose of it at designated
collection points. For more information see:
www.recyclethis.info. 2006/66/EC and its
amendment 2013/56/EU (battery directive): This product contains a battery that
cannot be disposed of as unsorted municipal waste in the European Union. See
the product documentation for specific battery information. The battery is
marked with this symbol, which may include lettering to indicate cadmium (Cd),
lead (Pb), or mercury (Hg). For proper recycling, return the battery to your
supplier or to a designated collection point.
or more information see: www.recyclethis.info.
Industry Canada ICES-003 Compliance This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements.
EC DECLARATION OF CONFORMITY
Hereby, Hangzhou EZVIZ Software Co., Ltd. declares that the radio equipment
type [CSDB2] is in compliance with Directive 2014/53/EU. The full text of the
EC DECLARATION OF CONFORMITY is available at the following web link:
http://www.ezvizlife.com/declaration-of-conformity.
. Safety Instruction
| Note: Please read the manual before using the device.
---|---
| This symbol on the device indicates that the safety compatibility manual
and/or installation manual must be read, which contains information related to
the safe operation of the device.
Caution: Be sure to read these instructions before operating the
equipment.
Due to the product shape and dimension, the name and address of the importer/manufacturer are printed on the package.
Customer Service
For more information, please visit
www.ezvizlife.com.
Need help? Please visit “www.ezvizlife.com/inter/page/contact-
us” for our local contact
details.
SAVE THIS MANUAL FOR FUTURE REFERENCE
Overview
Package Contents
The appearance of the chime and power adapter is subject to the actual one you have bought.
Tools You May Need
Drill (x1)
It is recommended to use a drill with a diameter of 6mm.
Basics
Doorbell
Name
|
Description
---|---
LED Indicator| • Solid Red: Less than 20% battery left.
• Slow-Flashing Red: Charging.
• Solid Blue: Person detected or doorbell pressed/fully charged/more than 20%
battery left.
Power Button| • Short press for 1 second: Turn on the doorbell.
• Long press for 5 seconds: Turn off the doorbell.
Chime
Name
|
Description
---|---
LED Indicator| • Solid Red: Chime is starting up.
• Fast-Flashing Red: Disconnected from the doorbell or SD card error.
• Slow-Flashing Red: Wi-Fi connection has failed.
• Solid Blue: Chime is functioning properly.
• Fast-Flashing Blue: Chime is ready for Wi-Fi connection.
Reset Button| Long press for 5 seconds to restart and all parameters are reset
to
default.
Setup
**** It is recommended to place the chime within 4 meters from where the doorbell is installed.
-
Power-on
1. Short press the power button for 1 second to turn on the doorbell. The doorbell beeps once and LED indicator flashes twice, indicating that the doorbell is turned on.
2. Plug the chime into a power
outlet (within 4 meters from the doorbell). When the LED indicator is fast-
flashing blue, it is ready for Wi-Fi connection.
-
Add to EZVIZ App
1. Create a user account.
– Connect your mobile phone to Wi-Fi (suggested).
– Search for “EZVIZ” in the App Store or Google Play TM .
– Download and install the EZVIZ app.
– Launch the app and register an EZVIZ user account.
2. Add chime to EZVIZ.
– Log in the EZVIZ app.
– On the Home screen, tap “+” on the upper-right corner to go to the scan QR code page.
– Scan the QR code on the body
of the chime.
– Follow the EZVIZ app wizard to
finish Wi-Fi configuration.
The doorbell will connect to the network by automatically connecting to the chime.
Please press the doorbell to check. The chime rings indicating that the connection is successful.
If the
network connection of the doorbell fails, please adjust the position of the
chime. It is recommended to put the chime and doorbell within 4 meters.
Installation
Doorbell Installation
**** Recommended installation height: 1.2m-1.5m.
• The
following situations are not recommended for installation. Otherwise the
network connection may be affected:
1. Iron doors;
2. Corners of load-bearing walls.
• Please make sure you have finished the Wi-fi configuration of the chime and
its LED indicator is solid blue before installation.
Step 1: Installation preparation.
If you have an existing doorbell system or have installed a mechanical or
electronic chime, you can replace the existing doorbell with the EZVIZ
doorbell.
– Please ring the existing doorbell first to make sure it’s working.
– Determine the mounting position of the doorbell, and check if you can reuse
the existing holes on the wall.
If you don’t have a doorbell or chime installed, skip step 1 and directly go to step 2.
Step 2: Shut off the electricity at the breaker.
Note: Always be careful when handling electricity wiring. If you’re not comfortable doing it yourself, do consult a qualified electrician.
Step 3: Select the mounting plate.
Install directly by the mounting plate, or use one of the inclined mounting
plates as a supplementary mounting bracket if you wish to see more on a
specific side.
Step 3: Install the mounting plate.
If the wall is smooth:
– Stick the plate foam on the mounting plate and then paste them to the wall.
If the wall is uneven,
– Place the drill template onto the surface you have chosen to mount the
doorbell.
(Optional) Drill four screw holes and insert anchors. There is no need to use
anchor if you were installing on the wooden doorframe.
It is recommended to use a drill with a diameter of 6mm.
– Fix the mounting plate to the wall. (Please fix the upper two screws first.)
Step 4: Install the doorbell.
– (Optional) For users who have previously installed a doorbell, connect the
existing doorbell wires to the terminals at the back of the EZVIZ doorbell,
then tighten the terminal screws.
– Install the
doorbell to the mounting plate.
Step 4: Restore power
at the breaker.
Micro SD Card Installation (Optional)
– Insert the micro SD card (sold separately) into the card slot as shown in the figure below.
– In the EZVIZ app, tap
the Storage Status in the Device Settings interface to check the SD card
status.
– If the memory card status displays as Uninitialized, tap to initialize it.
The status will then change to Normal and it can store videos.
Maintenance
When the doorbell battery is low, connect the doorbell to the power outlet via a power adapter.
You can also remove the doorbell from the mounting plate to charge by using the pin provided. Press and hold the hole on the bottom of the doorbell and then take it off.
- When charging, the doorbell will automatically turn on.
- Please make sure to shut off the electricity at the breaker before removing the doorbell if it’s wire-connected.
EXPOSURE TO RADIOFREQUENCY RF(for EU Market)
The frequency bands and the nominal limits of transmitted power (radiated and/or conducted) applicable to this radio device are the following:
| Band | Wi-Fi 2.4 GHz |
|---|---|
| Frequency | From 2.412 GHz to 2.472 GHz |
| Power transmission (EIRP) | 100 mW |
For detailed information, please visit
www.ezvizlife.com.Band Wi-Fi 2.4 GHz
Frequency From 2.412 GHz to 2.472 GHz
Power transmission (EIRP) 100 mW
LIMITED WARRANTY
Thank you for purchasing Hangzhou EZVIZ Software Co., Ltd. (“EZVIZ”) products. This limited warranty (“warranty”) gives you, the original purchaser of the EZVIZ product, specific legal rights. You may also have other legal rights that vary by state, province or jurisdiction. This warranty applies only to the original purchaser of the product. “Original purchaser” means any consumer having purchased the EZVIZ product from an authorized seller. The disclaimers, exclusions, and limitations of liability under this warranty will not apply to the extent prohibited by applicable law. No distributor, reseller, agent, or employee is authorized to make any modification, extension, or addition to this warranty.
Your EZVIZ product is warranted for a period of two (2) years from the date of purchase against defects in materials and workmanship, or such longer period as may be required by law in the country or state where this product is sold, when used normally in accordance with user manual. You can request warranty service by contacting our Customer Service. For any defective EZVIZ products under warranty, EZVIZ will, at its option, (i) repair or replace your product free of charge; (ii) exchange your product with a functionally equivalent product; or (iii) refund the original purchase price, provided you provide the original purchase receipt or copy, a brief explanation of the defect, and return the product in its original packaging. At EZVIZ’s sole discretion, repair or replacement may be made with a new or refurbished product or components. This warranty does not cover the shipping cost, insurance, or any other incidental charges incurred by you in returning the product.
Except where prohibited by applicable law, this is your sole and exclusive remedy for breach of this warranty. Any product that has either been repaired or replaced under this warranty will be covered by the terms of this warranty for the longer of ninety (90) days from the date of delivery or the remaining original warranty period. This warranty does not apply and is void:
- If the warranty claim is made outside the warranty period or if the proof of purchase is not provided;
- For any malfunction, defect, or failure caused by or resulting from the evidence of impact; mishandling; tampering; use contrary to the applicable instruction manual; incorrect power line voltage; accident; loss; theft; fire; flood; or other Acts of God; shipping damage; or damage resulting from repairs performed by unauthorized personnel;
- For any consumable parts, such as batteries, where the malfunction is due to the normal aging of the product;
- Cosmetic damage, including but not limited to scratches, dents, and broken plastic on ports;
- Any software, even if packaged or sold with EZVIZ hardware;
- For any other damages free from defects in material or workmanship;
- Routine cleaning, normal cosmetic and mechanical wear and tear. Please do not hesitate to contact your seller or our Customer Service, with any questions.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>