X Rocker 5127301 2.1 Wireless SE Video Gaming Floor Rocker User Manual

June 6, 2024
X-Rocker

X Rocker logo

2.1 WIRELESS

X Rocker 5127301 2.1 Wireless SE Video Gaming Floor
Rocker

WELCOME TO X ROCKER!
Thank you for purchasing this X Rocker gaming chair. You are now close to enhancing your favorite games and movies with audio!
To get started, please assemble the chair using the assembly instructions on the separate leaflet and then follow the instructions in this manual to get rocking!

Box contents

X Rocker 5127301 2.1 Wireless SE Video Gaming Floor Rocker -
Box

B1 – 1m 3.5mm to 3.5mm Audio cable
B2 – Power Supply Cable
B3 – Wireless Transmitter
B4 – 3m 3.5mm to 3.5mm Audio cable

CONTROL PANEL OVERVIEW

X Rocker 5127301 2.1 Wireless SE Video Gaming Floor Rocker - CONTROL PANEL
OVERVIEW

WIRELESS CONNECTION GUIDE: TV (ALL CONSOLES)

To connect using the wireless transmitter, connect the wireless transmitter (B3) to your TV set using the 3.5mm to 3.5mm cable (B1/B4)

X Rocker 5127301 2.1 Wireless SE Video Gaming Floor Rocker -
cable

Once connected, set the control panel on the chair and the wireless transmitter to the same band (1,2,3).

X Rocker 5127301 2.1 Wireless SE Video Gaming Floor Rocker -
band

To get the best sound, make sure that the volume on the TV is set to approximately 50% of the maximum. Depending on the TV, you may need to set the volume level separately in the TV sound settings menu. Please refer to the TV manual for guidelines.

WIRED CONNECTION GUIDE: TV (ALL CONSOLES)

X Rocker 5127301 2.1 Wireless SE Video Gaming Floor Rocker -
TV

  1. Connect B1 Cable to X Rocker control panel RCA INPUT sockets
  2. Connect B3 RCA adapters to another end of B1 RCA cable
  3. Connect B4 RCA cable to B3 Adapter.
  4. Connect B4 3.5mm end into the headphone socket of your Television
  5. Once connected to your TV, increase volume to 50% of the maximum for the best sound level.**

NOTE: If your TV does not feature a headphone socket then you may need to purchase an additional TOSlink adapter to get connected directly to a console for audio. Contact support for more details.
**Depending on your TV, you may need to increase the headphone volume separately in the TV sound settings.

CONNECT BY CONTROLLER: PS4 SYSTEMS ONLY

X Rocker 5127301 2.1 Wireless SE Video Gaming Floor Rocker -
CONTROLLER

  1. Connect the B4 cable to the bottom of the PS4 controller via the headset socket.
  2. Connect the other end of the B1 cable to the chair via the green port.
  3. With the PS4 turned on, go to the main menu (or locate the main menu screen). Press and hold the PS button on the PS4 controller until the quick menu appears on the screen.
  4. In this menu select [Adjust sound and devices]
  5. Then select [output to headphones]
  6. Change the setting from [Chat Only] to [All audio]
  7. Make sure the volume in the previous menu is set to the maximum.
  8. Set the control panel wireless switch to the ‘OFF’ position

TROUBLESHOOTING TIPS

ISSUE TROUBLESHOOTING STEPS
No power going to the control panel • Make sure that the power cable is

connected correctly.
• Make sure that the power source is working correctly.
• With the chair turned to the ON position, give the power cable a slight wiggle in the port. If any light flickers (or not) please contact support (support@xrockergaming.com).
No sound| • Review the connection methods on the previous page and try alternative connection methods if possible.
• Confirm that the device/system is correctly configured as per the previous connection guide.
• Make sure that the wireless channel switcher is in the corresponding position that suits your connection method (1, 2, 3 for wireless and AUX for wired connections.)
Wireless transmitter cuts out during gameplay/No vibration or subwoofer sound via analog connection| Please make sure the volume of the source device is at a higher level to strengthen the audio signal.
The cables connected to my X Rocker has been broken accidentally| Please contact X Rocker support (support@xrockergaming.com) regarding this issue.
Interference over a wireless connection| In this case, try another of the three wireless bands to isolate the signal.

HEALTH AND SAFETY INFORMATION

  • Avoid immersing or allowing the X Rocker to come into contact with liquids.
  • Please consult X Rocker Support before unscrewing any of the electrical components on the chair.
  • Please be mindful of any cabling laid out between the X Rocker and power source/audio device.
  • Please be mindful of the cabling attached when moving/swiveling the X Rocker.
  • If the cables or any electrical equipment are broken then this may present a choking risk, please contact Support for replacements and dispose of these parts safely.
  • Do not stand on the X Rocker or exceed the 250lbs weight limit via other means.
  • If your X Rocker comes with a pedestal: do not lean back on the chair to the point in which the pedestal would lift off the ground.
  • If your X Rocker comes with armrests: X Rocker armrests are designed for support and comfort during gameplay, please do not use these as support for getting in/out of the chair.
  • Playing audio for long periods at loud volumes may contribute to difficulties in hearing.
  • Please be considerate to others when playing audio through the X Rocker speakers at higher volumes.

Power supply safety information

ATTENTION:

A. For Power Adapter, the apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus;
B. For Power Adapter, the MAINS plug is used as the disconnect device, the disconnect device shall remain readily operable;
C. Only use the attachments/accessories specified by the manufacturer.

Power Supply unit trademark: BI
Model name: BI18L-090200-AdU
Input: AC 100-240V~ 50/60Hz 0.5A
Output: DC 9V 2A

CAUTION: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

IC
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.

IC Radiation Exposure Statement:
This equipment complies with Canada’s radiation exposure limits set forth for uncontrolled environments.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Need Help?
Email: support@xrockergaming.com
www.xrockergaming.com
IMPORTANT: You must keep your original retail receipt as proof of purchase.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

X-Rocker User Manuals

Related Manuals