X Rocker XPBT21 2.1 Bluetooth Pedestal Gaming Chair User Guide

X Rocker XPBT21 2.1 Bluetooth Pedestal Gaming Chair User Guide

Welcome to X Rocker!

Thank you for purchasing this X Rocker gaming chair. You are now close to enhancing your favorite games with glorious audio!

To get started, please assemble the chair using the assembly instructions on the separate leaflet and then follow the instructions in this manual to get rocking!

Box contents

B1 – 3m 3.5mm to 3.5mm Audio cable
B2 – 15cmRCA to female3.5 mm audio cable
B3 – RCA female to female adapters
B4 – Power Supply Cable

Control Panel Overview

Wired Connection Guide: TV

(All consoles)

1. Connect B1 Cable to X Rocker control panel MP3 INPUT sockets.
2. Connect other end of B1 3.5mm end into the headphone socket of your television.
3. Once connected to your TV, increase volume to 50% of the maximum for the best sound level. **
4. Push the ‘MODE’ button on the control panel to switch to AUX mode.

** Depending on your TV you may need to increase the headphone volume separately in the TV sound settings.

Wired Connection Guide: PS4 & Xbox Controller

(Enables Chat Pass-Through Mode)

DUAL SHOCK 4 CONNECTION GUIDE

1. Connect the B1 cable to the bottom of the PS4 controller via the headset socket.
2. Connect the other end of the B1 cable to the chair via the green port.
3. With the PS4 turned on, go to the main menu (or locate the main menu screen). Press and hold the PS button on the PS4 controller until the quick menu appears on screen.
4. In this menu select [Adjust sound and devices]
5. Then select [output to headphones]
6. Change the setting from [Chat Only] to [All audio]
7. Make sure the volume in the previous menu is set to the maximum.
8. Set the control panel to AUX mode by pushing the ‘MODE’ button.

XBOX CONTROLLER GUIDE

1. Set the control panel to AUX mode by pushing the ‘MODE’ button.
2. Connect the B1 cable to the bottom of the Xbox controller via the headset socket*
3. The XBox will automatically recognize the connection and pass through to the X Rocker

*For headset and chat compatibility, you will need to place a CTIA compliant headset into the headphone socket of theX Rocker control panel. Please check with your device manufacturer to ensure that you have a CTIA compliant headset. If you use an OMTP compliant headset then you may experience issues with  chat and audio functionality.
**You may need an Xbox One headset adapter if a headset socket is not available on your controller. These are available separately through any gaming retailer.

Bluetooth Connection Guide

Step 1:
Set the control panel to Bluetooth mode by pushing the  ‘MODE’ button

Step 2:
On the Audio output device go into its Bluetooth settings, turn Bluetooth on if it is not on already and search for XROCKER. Upon finding this, select the XROCKER option.
If a passcode is required the four digit code will be ‘0000’.

Troubleshooting Tips

• Make sure that the power cable is connected correctly.
• Make sure that the power supply at the power source is working correctly.
• With the chair turned to the ON position, give the power cable a slight wiggle in the port. If any lights flicker (or not) then please contact support.

No sound|

• Review the connection methods on the previous page and try alternative connection methods if possible.
• Confirm that the device/system is correctly configured as per previous connection guide.
• Make sure your control panel is set to the correct ‘MODE’.

Bluetooth cuts out/No subwoofer sound via analogue connection|

• Please make sure that the volume of the source device is at a higher level to strengthen the audio signal.

The cables connected to my X Rocker have been broken accidentally|

• Please contact X Rocker support (support@xrockergaming.com) regarding this issue.

Health and Safety Information

• Avoid immersing or allowing the X Rocker to come into contact with liquids.
• Please consult X Rocker Support before unscrewing any of the electrical components on the chair.
• Please be mindful of any cabling laid out between the X Rocker and power source/audio device.
• Please be mindful of cabling attached when moving/swivelling the X Rocker.
• If the cables or electrical equipment are broken then this may present a choking risk, please contact Support for replacements and dispose of these parts safely.
• Do not stand on the X Rocker or exceed the 250lbs weight limit via other means.
• Do not lean back on the chair to the point in which the pedestal would lift off the ground.
• X Rocker armrests are designed for support and comfort during gameplay, please do not use these as support for getting in/out of the chair.
• Playing audio for long periods at loud volumes may contribute to difficulties in hearing.
• Please be considerate to others when playing audio through the X Rocker speakers at higher volumes.

Power Supply Safety Information

ATTENTION

A. For Power Adapter, the apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus;
B. For Power Adapter, the MAINS plug is used as the disconnect device, the disconnect device shall remain readily operable;
C. Only use the attachments/accessories specified by manufacturer.

Power Supply unit trademark : ZL
Model Name : ZL-A024W1202000
Input : 100-240V～ 50/60Hz 1.0A
Output: DC 12V/2A

FCC

Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

IC

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

1. this device may not cause interference, and
2. this device must accept any interference, including interference that may cause undesired operation of the device.

IC Radiation Exposure Statement:
This equipment complies with Canada radiation exposure limits set forth for uncontrolled environments.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Need Help?

Email: support@xrockergaming.com
www.xrockergaming.com

IMPORTANT: You must keep your original retail receipt as proof of purchase.

References

• X Rocker Gaming | Gaming Furniture Built For All Gamers

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>