SABINETEK SingMic Wireless Microphone AudioWow S1 Instructions

: June 6, 2024
: SABINETEK

SABINETEK SingMic Wireless Microphone AudioWow S1 Instructions

Product specifications

Productweight: 118g
Bluetooth chip: Qualcomm CSR
Bluetooth effective range: 15m
Microphone type: Cardioid
Recording bandwidth: 20Hz-20KHz
Sample rate: 44.lKHz
Frequency response range: 20Hz-20KHz
Battery capacity: 1000 mAh
Charging time: <2 hours
Charging input voltage: SV
Charging port: Type-C

Device Instructions

Power button

Long press to switch on/ off. After power on, click to turn on/ off the vocal removal function. Double click to switch the light effect. Long press for 5 seconds under power off state to enter the manual
Bluetooth pairing state.

Multifunction button

In the APP recording interface, long press for 1 second to start/ end audio and video recording.
Click the volume up/ down button to switch the functions, realizing the cycle switching between microphone volume, play volume and sound effect settings. The default is microphone volume adjustment
mode.

Volume up/ down button

Use with multi-function button when multi-function button is switched to
Microphone volume mode: turn up / down the microphone input volume.
Play volume mode: turn up/ down the volume of mobile music. Sound effect setting mode: forward/ reverse cycle switching sound effect.

Line in/ out jack

Connect 3.5mm audio jack of other devices through audio cable for recording/live broadcasting/sound amplification, etc. It also can be used to import the external accompaniment when used wirelessly

Earphone jack

Plug in headphones for voice and music monitoring.

Type-C interface

Charge the product through the Type-C data cable.

Connecting via Bluetooth

Initial pairing

Place the mobile phone within lm from Audio WowSl; By pressing and holding the power button for 3 seconds, AudioWow Sl will turn on and initiate Bluetooth pairing state; atthis time, the indicator
light will appear blue in a rapidly flashing state; Search for AudioWow Sl in the Bluetooth list of mobile phone, and click to build Bluetooth connection;
After pairing is finished, the AudioWow Sl indicator light will appear blue in a slowly flashing state.

Manual pairing

This item applies to AudioWow Sl that has already built a connection with other mobile phones;
By pressing and holding the power button for 5 seconds, AudioWow Sl will turn on and initiate the Bluetooth pairing state; at this time, the indicator light will appear blue in a rapidly flashing state;
Search for AudioWow Sl in the Bluetooth list of mobile phone, and click to build Bluetooth connection.

Automatic re-connection

This item only applies to mobile phones that have already built
Bluetooth connection with AudioWow Sl; Make sure the bluetooth of the mobile phone is on, and turn on AudioWow Sl;
Observe that the indicator light of AudioWow Sl changes from blue fast flashing to slow flashing, and if so, the reconnection is considered as successful.

Charging the device

Please connect this device and the charging plug with the Type-C data cable Low power alert: when the battery level is below 5%, the red light flashes
3 times every 5 seconds
Charging: Indicator light is always red
Charging completed: Indicator light turns off.

Precautions

Do not disassemble the device
Do not overheat the device, including exposure to the sun for a long time, close to fire, or similar environments
The battery cannot be replaced by yourself. If it is necessary to replace it, please contact professional maintenance personnel
Do not modify the device, connect antennas, or use other transmitting antennas
Please clean the device with a soft dry cloth
Do not put it in water or other liquids
Direct or indirect losses caused by violation of usage rules are not within the scope of warranty
Do not swallow it.
If you have any questions or problems aboutthis device not covered in this manual, please contact us.

App download

To use the full function of the device, please download SabineNet app.
Method 1: search for Sabine Net in mainstream app stores such as
Apple Store or Android (Google Play) Store
Method 2: scan the QR code below to download

FCC Warning Message

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID:2AK54 -SABINE-SINGMIC Responsible Party:
Company name:Sabinetek Corporation Address:4999 Ginger Court Rancho Cucamonga CA
Tel:(909) 764 8866
E-mail: brett.yang@sabinetek.com