SABINETEK S630 SmartMike Classic Bluetooth Microphone User Manual
- June 5, 2024
- SABINETEK
Table of Contents
SABINETEK S630 SmartMike Classic Bluetooth Microphone
Downloading the app
To utilize all functions of the device, please download the MetAudio app.
- Method 1：Search MetAudio in the Apple/Google Play store
- Method 2：Scan the below QR code to download
PACKING LIST
- SmartMike Classic x1
- Earpiece x1
- USB-C Charging Cable x1
- Windfoam x1
- Deadcat x1
- Instruction Manual x
Product Specifications
- Weight: 14 g
- Bluetooth Chipset: Qualcomm CSR
- Bluetooth effective distance: 15m
- Microphone Type: Omnidirectional condenser mic capsule
- Recording Bandwidth: 20Hz-20KHz
- Sampling Frequency: 44.1KHz
- Frequency range: 20Hz-20KHz
- Built-in battery: 115 mAh
- Charge time: <2 hours
- Input voltage: 5V
- Charging port: USB-C
Device Instructions
Turn on：
While powered off, hold for 3s to turn on and enter pairing state.
Turn off：
While powered on, hold for 3s to turn off.
Manual pairing：
While powered off, hold for 5s to enter manual pairing state.
Recording：
While in the app’s recording interface, single click to start/stop recording.
Calls：
Single click to take/hang up calls, hold for 1s to refuse an incoming call
Music：
While playing music, double click to play/pause music..
Bluetooth Connection
Connecting for the first time
Place your phone within 1m of SmartMike Classic. Hold the power button for 3s.
SmartMike Classic will turn on and enter Bluetooth pairing state. The
indicator light will flash rapidly in blue.
On your phone’s Bluetooth list, search for “SmartMike Classic” and click on it
to connect via Bluetooth. After connection is successful, SmartMike Classic’s
indicator light will flash slowly in blue.
Manual pairing
This applies to those who have already established a Bluetooth connection with
SmartMike Classic and their mobile phone. Hold the power button for 5s.
SmartMike Classic will turn on and enter manual pairing state. The indicator
light will flash rapidly in blue. On your phone’s Bluetooth list, search for
“SmartMike Classic” and click on it to establish Bluetooth connection.
Automatic re-connecting
This applies to those who have already established a Bluetooth connection with
SmartMike Classic and their mobile phone. With your phone’s Bluetooth turned
on, turn on SmartMike Classic. SmartMike Classic’s indicator light will change
from rapid flash to slow flash in blue, indicating that the reconnection is
successful.
Charging The Device
Please use the USB-C charging cable to connect the device with a USB charging port or a computer.
- Low battery warning：While battery is lower than 10%, indicator light will flash slowly in red
- During charging：Indicator light will glow red
- Charge complete：Indicator light will glow green
Precautions
- Do not disassemble;
- Do not expose the device to excessive heat, such as prolonged exposure to the sun, near a fire source or similar environments;
- The battery cannot be replaced by yourself. If you need to replace it, please contact professional maintenance personnel;
- Do not modify the device by yourself, do not use an external antenna alone or use other transmitting antennas;
- Please use a soft dry cloth to clean the equipment;
- Do not expose device to water or other liquids;
- Direct or indirect losses caused by violation of the rules of use are not covered by warranty;
- Do not swallow product or accessories;
- If you have any questions or problems about this equipment that are not covered in this manual, please contact us
FCC Warning Message
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
FCC ID:2AK54-SABINE-S630 Responsible Party: Company name:Sabinetek Corporation Address:4999 Ginger Court Rancho Cucamonga CA Tel:(909) 764 8866 E-mail: brett.yang@sabinetek.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>