SABINETEK K020 Bluetooth Karaoke Microphone Instruction Manual
- June 9, 2024
- SABINETEK
Table of Contents
SABINETEK K020 Bluetooth Karaoke Microphone Instruction
Product Description
Product Specifications
- Product weight: 310g
- Bluetooth effective range: 15m
- Microphone type: Cardioid
- Recording bandwidth: 20Hz-20KHz
- Sample rate: 44.lKHz
- Battery capacity: 2600 mAh
- Charging time: <2 hours
- Charging input voltage: SV
- Charging port: USB-C
Device Instructions
Package Contents
- Audio Wow Pl x 1
- USB-C Charging Cable x 1
- 3.SmmTRRScable xl
- Instruction manual x 1
- Type-C to 3.5mm Audio AUX Cable x 1
Product Instructions
Description of the Buttons
-
Power ON/OFF Button
Power-on: When the mic is turned off, press and hold the “ON/OFF” button for 3 seconds to turn it on, and the Bluetooth is ready to connect.
Power-off: While the mic is turned on, press and hold the “ON/OFF” button for 3 seconds to turn it off.
Vocal Cancel: Press the “ON/OFF” button to remove the vocal track of the song during audio playback.
Mode Switch : Press the “ON/OFF” button twice to switch modes between audio volume and sound effect settings. (NOTE: You’ II be prompted for the current mode when double-pressing it again after 5 seconds; if you do so with in 5 seconds, the mic goes to the MODE SWITCH.) The volume control mode is enabled by default. -
Volume Knob
The volume knob may be switched to one of the following functions when you double-press the “ON/OFF” button.
Volume Control: Turn the audio volume up or down
Sound Effect Settings: Switch between different sound effects -
Audio Jack
Connect other devices through the 3.5mm audio jack for recording, live streaming, etc. -
Type-C Charging Port
Charge the mic with a Type-C cable;
Plug the headphones through the included Type-C to 3.5mm audio AUX cable for monitoring.
Bluetooth Connection
-
Connecting for the first time
Place your phone within lm of Audio Wow Pl.
Hold the power button for 3s. Audio Wow Pl will turn on and enter Bluetooth pairing state. The indicator light will flash rapid Ix in white.
On your phone’ s Bluetooth list, search for ‘Audio Wow Pl” and click on it to connect via Bluetooth. After connection is successful, Audio Wow Pl’s indicator light will flash slowly in white. -
Automatic re-connecting
This applies to those who have already established a Bluetooth connection with Audio Wow Pl and their mobile phone.
With your phone’ s Bluetooth turned on, turn on Audio Wow Pl.
Audio Wow Pl’ s indicator light will change from rapid flash to slow flash in white, indicating that the reconnection is successful.
How to Charge
- Low Battery Alert: When the battery level falls below 5%, the red indicator light flashes three times every five seconds.
- Battery Charging: The indicator light is illuminated in red.
- Full Charge: When the battery is fully charged, the indicator light turns off.
Instructions Duet Singing
Duet Mode
Two Audio Wow Pl can sing in pairs
-
Pairable Mic
The pairable mic is on, and the Bluetooth connection is off. The indicator light is rapidly blinking white. -
Main Mic
When the main mic is on, press the “ON/OFF” button while rotating the knob to connect the pairable mic. The indicator light is rapidly blinking white. -
Successful Pairing
The indicator light on the pairable mic blinks white slowly, whereas the indicator light on the main mic blinks white quickly. And there will be a prompt after a successful pairing. -
Connect the Mics to a Smartphone
Search for Audio Wow Pl in the Bluetooth list of your smartphone and tap to connect it. After pairing is complete, the indicator lights on both the main and pairable mies will blink white slowly, and there will be a prompt for a successful Bluetooth connection.
Pay Attention To Our
Precautions
- Do not disassemble;
- Do not expose the device to excessive heat, such as prolonged exposure to the sun, near a fire source or similar environments;
- The battery cannot be replaced by yourself. If you need to replace it, please contact professional maintenance personnel;
- Do not modify the device by yourself, do not use an external antenna alone or use other transmitting antennas;
- Direct or indirect losses caused by violation of the rules of use are not covered by warranty;
- Direct or indirect losses caused by violation of the rules of use are not covered by warranty;
FCC Warning Message
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’ s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC ID:2AK54-SABINE-K020
Responsible Party:
Company name:Sabinetek Corporation
Address:4999 Ginger Court Rancho Cucamonga CA
Tel:(909) 764 8866
E-mail: brett.yang@sabinetek.com
Follow Us
( www.sabinetek.com)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>