SABINETEK S620 SmartMike Silver Rechargeable Wireless Bluetooth Microphone User Manual
- June 5, 2024
- SABINETEK
Table of Contents
SABINETEK S620 SmartMike Silver Rechargeable Wireless Bluetooth Microphone
User Manual
Contents List
-
SmartMike Silver × 1
-
Charging Cable × 1
-
Instruction manual × 1
-
Windshield × 1
Please download the SmartMike+ app
For the latest information, please visit: www.sabinetek.com for enquiry
Device Instructions
-
Turn on
Press and hold the power button for 3 seconds till the blue indicator light flashes rapidly -
Turn off
Press and hold the power button for 3 seconds till the indicator light is of
An external microphone can be attached to the 3.5mm audio jack for dual microphone input
Charging the device
- Please connect the device with the attached Micro-USB cable
- When the device is connected, the indicator light will glow red to indicate charging; when the charging completes, the indicator light will turn green.
Connecting via Bluetooth
-
Initial pairing
a)Keep the phone within one meter from the SmartMike Silver
b) Press and hold the power button for 3 seconds to turn it on till the blue
indicator light flashes quickly to indicate that it is ready for pairing
c)Enable the Bluetooth function of your phone and find “SmartMike Silver” from the Bluetooth device list, then tap it to set up Bluetooth pairing
d)SmartMike Silver indicator light will flash slowly in blue to indicate that Bluetooth pairing is successful -
Auto Reconnecting
For subsequent pairings, turn on SmartMike Silver while the Bluetooth of the mobile phone is on. Press and hold the power button till the indicator light flashes quickly in blue. SmartMike Silver will automatically connect with your phone, a slow blue indicator light will indicate that the pairing is successful
Quick Start Manual
Before audio and video recording
Device connection : connect SmartMike Silver to the mobile phone via Bluetooth
Monitoring adjustment : Listen with headphones, monitor and adjust gain
levels and other settings via the app
Noise reduction adjustment : appropriate level of noise reduction can be
selected based on different scenarios
Input adjustment : adjust microphone gain in the app
Video parameter adjustment : the resolution and aspect ratio of video can
be adjusted .
Microphone toggle : select the built-in microphone of the device or an external microphone for input (such as the built-in microphone of the earphone). Select both at the same time to conduct stereo recording. Please note to keep proper space between microphone and sound source while recording
Import of background music: enable the mixing function within the SmartMike+ app and play music from a 3rd party software on the phone, then switch back to the SmartMike+ App to achieve real-time background music mixing
Start recording:
After adjusting the appropriate audio/video and interface parameters, users can click record or shoot button to start recording, or click the power button of SmartMike Silver device onceto start audio/video recording
or
During recording:
Microphone gain, monitoring, noise reduction level, and music volume can be adjusted in real time.
End of recording:
Click the audio/video recording button, or click the power button of AudioWow
device once to finish recording
Product Application Scenarios
-
Vlog shooting : please operate according to the manual and please note to set proper parameters for audio and video settings: select microphone, positions and space between recording sound source and pickup microphone, as well as noise reduction level, etc
-
Podcast creation : please operate according to the manual and adjust the gain, background track and noise reduction, etc.
-
Interview: please operate according to the manual. Enable mic input for SmartMike Silver within the microphone selection to pick up voice of the interviewee and enable the phone mic input to pick up voices of interviewer. AI-powered voice subtitle transcriptions can be added after recording
Precautions
- Do not disassemble the device
- Do not overheat the device, including exposure to the sun for a long time, close to fire, or similar environments
- The battery cannot be replaced by yourself. If it is necessary to replace it, please contact professional maintenance personnel
- Do not modify the device, connect antennas, or use other transmitting antennas
- Please clean the device with a soft dry cloth
- Do not put it in water or other liquids
- Direct or indirect losses caused by violation of usage rules are not within the scope of warranty
- Do not swallow it.
- If you have any questions or problems about this device not covered in this manual，please contact us at www.sabinetek.com
FCC Warning Message
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions,may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
FCC ID: 2AK54-SABINE-S620
Documents / Resources
|
SABINETEK S620 SmartMike Silver Rechargeable Wireless Bluetooth
Microphone
[pdf] User Manual
SABINE-S620, SABINES620, 2AK54-SABINE-S620, 2AK54SABINES620, S620, SmartMike
Silver Rechargeable Wireless Bluetooth Microphone, SmartMike Silver, Wireless
Bluetooth Microphone, Bluetooth Microphone, S620, Microphone
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>