Rongtai RT6891 Massage Chair Instruction Manual

RT6891 Massage Chair
Instruction Manual

PRELIMINARY CHECKS

Commissioning

• Use the controller to recline the backrest to its lowest position, raise and extend the footrest to its top position, make sure there is enough clearance before commissioning.
• Return the backrest and footrest back to their default position after commissioning and turn off the power switch. To choose the massage program, please check the Instructions of Control Panel and Instructions of Touchscreen Controller for reference.

Before Sitting in the Chair

• Ensure the footrest is well assembled before sitting on the massage chair.
• Ensure the massage chair is returned to its original position before sitting on it.
• If there is any part not in the default position, please turn off the massage chair to allow it to restore.

CAUTION
Do not take a seat while the largest is lifted.
Do not put excessive load on the legrest to avoid damage.

After Use
Always unplug the massage chair from the electrical outlet immediately after use.
Put the Touchscreen Controller onto the holder.
Turn off the power switch and unplug the massage chair from the electrical outlet while not in use to avoid children’s power on the massage chair accidentally.
When not in use for a long period of time, we recommend that the chair be covered, the power cord is coiled, and that the unit be placed in an environment free of dust and moisture.

NAME AND FUNCTION OF EACH COMPONENT

Controller Instructions

| Power On/Off Press this button to power on/off the controller.

• Press this button while connected to power to show the menu display, the LCD screen is lit, use the UP/DOWN/LEFT/RIGHT buttons to navigate the screen, press OK  to select.
• Press this button again to turn off the product.

---|---
| Menu

• Display the Auto Program, Manual Program, Airbag, Heat, Roller, and Settings function.
  (Check the Display Menu for detailed information)

| Shoulder Position Adjustment Button(Moves mechanism up and down)

• Press and hold the Position UP/DOWN ADJUST button to adjust the rollers to the desired position while in Manual-Point massage mode.
• While body scanning is working, use these two buttons to slightly adjust the mechanism up/down the shoulder.

| Auto Program Button

• Press to start the pre-set auto massage programs. You can choose Extension, Refresh, Recovery, Relax, Neck&Shoulder, Waist&Buttocks massage programs according to your liking.
  (Check the Display Menu for detailed information).

| Manual Program Button

• Display the manual mode menu, press the UP or DOWN button to navigate among Kneading, Knocking, Tapping, Shiatsu, and Sync massage techniques.
  (Check the Display Menu for detailed information)

| Navigation Button

• Use the UP/DOWN/LEFT/RIGHT arrow buttons to navigate the screen, press OK to select.

| Heat On

• Press to turn on the heat, the heat icon will be lit on the display screen;
• Press again to turn off the heat, the heat icon will go dark on the display screen;

NAME AND FUNCTION OF EACH COMPONENT

| Back-Up
Press and hold to raise the backrest, release the button to stop.
Back Down
Press and hold to lower the backrest, release the button to stop.
---|---
| Zero Gravity Position 1
Press Zero Gravity Position 1 to put the chair in Zero Gravity Position 1, press again to close the Zero Gravity Position 1; The  Zero 1 icon will be lit on the display screen accordingly.
Zero Gravity Position 2
Press Zero Gravity Position 2 to put the chair in Zero Gravity Position 2, press again to close the Zero Gravity Position 2;The  Zero 2 icon will be lit on the display screen accordingly.

PRELIMINARY CHECKS

Moving the Massage Chair
Roll the chair on its casters to the desired location.

• Incline the backrest to an upright position.
• Turn off the power switch and unplug the appliance from the electrical outlet.
• Using two people, push down on the backrest and lift up on the front side by grabbing the moving Holder located to the front bottom of the armrest),roll the chair on its casters to the desired location(check the sketch for reference).

CAUTION

• Do not move the chair when there is a user inside.
• To carry this product, do not lift by the footrest or armrest, hold the chassis, and steady the backrest(have 4 or more people to carry the product).

Connecting to Power

• Connect this appliance to a 3-wire properly grounded outlet.
• Turn on the main power switch by the right-hand side of the massage chair.

CAUTION

• Please verify that there is no damage to the supply cord before switching on the massage chair.
• Please verify that the main power switch is turned off before connecting to power.

PRELIMINARY CHECKS

Step 2, Install the Controller

• Connect the controller cable to the massage chair’s plug connector (line up the pins with the port before connection).
  

• Connect the power cable to the product power connector port.
  

NAME AND FUNCTION OF EACH COMPONENT

Display Screen Instructions
Auto Massage Program

• Press to display the Auto Program menu, press this button to toggle among 6 Auto Programs: EXTENSION, REFRESH, RECOVERY, RELAX, NECK & SHOULDER, and WAIST & BUTTOCKS.The active program is displayed at the top of the status screen.(Check below Menu display photo for reference)

Extension
Designed for people who experience body stiffness and muscle tension.
It helps to relieve body stiffness and improve your body flexibility.
Refresh
Focusing on tight and sore muscles helps to relieve waist, back, and neck pain.
Recovery
Recovery: Designed for after-work recovery, it helps to release the fatigue and speed recovery.
Relax
This massage program is designed for morning or midday relaxing, it helps to de-stress, clear the mind and increase productivity.
Neck &Shoulder
Designed to help to ease the pain and stiffness in the neck and shoulders, combined with the curvature design of the backrest, this program targets the rollers at the deep tissue of the neck and shoulders.
Waist &Buttocks
To relieve the pain of the lower back, this massage mainly focuses on the lumbar vertebra and the rollers will conduct targeted massage to relieve tension in this area.

NAME AND FUNCTION OF EACH COMPONENT

Manual Program

• Press MANUAL from the MENU display, press UP or DOWN button to navigate among MODE, PART, WIDTH, SPEED and ZERO GRAVITY.

Massage Mode:
Press MODE from MANUAL display, press RIGHT button then press the UP or DOWN button to navigate among Kneading, Knocking, Tapping, Shiatsu, and Sync massage techniques. Press the OK button to enter the setting you desire. The selected mode will show on the home screen.
Back Mechanism Massage Part: Press PART from MANUAL display, press Right button then press Up or Down button to navigate among Whole, Partial and Point massage regions. Press the OK button to enter the setting you desire.

Back Mechanism Massage Width:
Press WIDTH from MANUAL display, press RIGHT button then press UP or DOWN button to navigate among Wide, Medium and Narrow mechanism roller width.Press the OK  button to enter the setting you desire. Selected width will show on the home screen.(Not adjustable in manual mode-kneading/sync)
Mechanism Massage Speed:
Press SPEED from MANUAL display, press RIGHT button then press UP or DOWN button to navigate among level 1,2,3,4,5,6 Mechanism massage speed.Press the OK button to enter the speed level you desire. (Not adjustable in Shiatsu mode)

PRELIMINARY CHECKS

Floor Protection

• We recommend placing a piece of carpet or soft mat underneath it to avoid damaging the floor.

Surrounding Environment
Do not use the massage chair in high moisture environments such as near the swimming pool or bathroom to prevent electric shock accidents.
Please keep the massage chair away from heated surfaces to prevent fire hazards or damage to the product.

Grounding
This product must be grounded, the plug must be plugged into an appropriate 3-wire grounded outlet that is properly installed and grounded in accordance with all local codes and ordinances to reduce the risk of electrical shock.

Preliminary Checks
Installation Method
Step 1, Take all massage chair units out of the cartons
Unpack the cartons and take out all sewing and other accessories out of the cartons.
Before beginning installation, please verify that all components are included(check with the packing list carefully)

PRELIMINARY CHECKS

Position & Placement for Installation
Clearance space for the massage chair:

• Ensure there is adequate clearance for the installation: It needs 15 cm clearance for the reclining of the backrest; It needs 20 cm clearance space for the extension of the footrest and sliding forward of the chair.

• Keep it 1 meter away from the TV, radio, or other audio/video appliance to avoid signal interference.
  

• Keep the distance between the power socket and power switch within 1.5 meters.
  

CAUTION

• Keep the distance between the power socket and power switch within 1.5 meters to avoid damage to the power cord while the massage chair slides forward.
• Straighten the power cord while in use to avoid tangle or damage.
• When the massage chair slides forwards or back, please check to make sure there are no children, pets, or other obstacles around to avoid accidents.

NAME AND FUNCTION OF EACH COMPONENT

Zero Gravity Position
Press ZERO GRAVITY from MANUAL display, press RIGHT button then press UP
or DOWN button to navigate among position1,2 or OFF (deactivate Zero Gravity).
Press the OK button to enter the setting you desire.

Airbags

• Airbag: Press AIRBAG from MENU display to show the Airbag display, press the RIRHT button then press the UP or DOWN button to navigate between the Part-Air pressure region and the Force-Air pressure intensity, Press the OK button to enter the setting you desire.

Part-Air Pressure Region
Press PART from AIRBAG display, press RIGHT button then press UP or DOWN button to navigate among: Full, Arm&Shoulder, Leg&Foot positions. Press the OK button to enter the airbag position you desire.

Force-Air Pressure Intensity
Press FORCE from the AIRBAG display, press the RIGHT button then press the UP or DOWN button to navigate among:1,2,3,4,5 air pressure intensity, or Off (deactivate the airbag function). Press the OK button to enter the airbag setting you to desire. Press arrow keys to select
Heat
Press HEAT from MENU display, press RIGHT then press UP or DOWN button to navigate among heat levels 1,2,3 or OFF(turn off heat ). Press the OK button to enter the heat setting you desire.

NAME AND FUNCTION OF EACH COMPONENT

Foot Roller
Press ROLLER from MENU display, press RIGHT button then press UP or DOWN button to navigate among foot roller speed: level 1,2,3 or OFF (deactivate foot roller).
Press the OK button to enter the speed level you desire.

Settings
Press SETTINGS from the MENU display, then press the UP or DOWN button to navigate among TIME, LANGUAGE, BLUETOOTH, and POWER SAVE.
Time
Press TIME from SETTINGS to show available timer: 10mins,20mins,30mins.press the RIGHT button then press the UP or DOWN button to navigate, press the OK button to enter the timer you desire.
Language
Press LANGUAGE from SETTINGS to show available language: EN.press RIGHT button then press UP or DOWN button to navigate, press OK button to enter the language you desire.
Bluetooth
Press BLUETOOTH from the SETTINGS display, press RIGHT then press the UP or DOWN button to turn On/Off Bluetooth, Press the OK button to enter the setting you desire.
Power Save
Press POWER SAVE from the SETTINGS display,press RIGHT then press the UP or DOWN button to turn On/Off Power Save mode, Press the OK button to enter the setting you desire. (In Power Save/Off mode, Bluetooth function is not available) Please deactivate Power Save mode to turn on Bluetooth.

|
---|---

NAME AND FUNCTION OF EACH COMPONENT

Tips：
In the process of Auto or Manual Setting, the LCD screen will auto revert back to the home screen after 10 seconds if there is no operation entered into the controller.

Tips

• While the appliance is running, press twice the MENU button to revert to the home screen.
• At the home screen display, press the LEFT or RIGHT button to adjust the airbag intensity(works in the process of both Auto and Manual program); press the UP or DOWN  button to adjust the massage intensity(only works in the process of Manual program)
• Press the Auto button to select auto massage programs.

CAUTION

• Do not disassemble this product yourself to avoid product damage.
• Make sure no water or other liquid enters the controller to avoid fault.
• Do not pinch or squeeze the controller or power cord.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>