hama 00118611 TV Wall Bracket Instruction Manual

: June 3, 2024
: Hama

Table of Contents

Required Tools
Installation kit
Operating instruction
Explanation of Warning Symbols and Notes
Package Contents
Safety Notes
Intended use and specifications
Installation requirements and installation
Setting and maintenance
Warranty Disclaimer
Terms of waranty
Support & Service
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

hama 00118611 TV Wall Bracket Instruction Manual

Required Tools

Required tools

Installation kit

Installation kit

installation

Operating instruction

Thank you for choosing a Hama product.
Take your time and read the following instructions and information completely. Please keep these instructions in a safe place for future reference. If you sell the device, please pass these operating instructions on to the new owner.

Explanation of Warning Symbols and Notes

Warning
This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks

Note
This symbol is used to indicate additional information or important notes.

Package Contents

TV wall bracket
Installation kit (see contents, Fig. 1)
These operating instructions

Safety Notes

Warning

Given the multitude of terminal devices and wall structures available on the market, the supplied mounting kit is unable to cover every option.
It occasionally happens that the screws for attaching the terminal device to the wall bracket are too long.
Please note that the supplied wall plugs are for use with concrete brick and solid brick walls only.
Read the operating instructions for your terminal device before attempting to mount it. The instructions provide information about the type and measurements of suitable fastening materials.
If the supplied mounting kit does not contain suitable fastening materials for mounting the terminal device, purchase these from a specialised dealer.
If the wall on which the bracket is to be mounted is made of different material types and construction types to those specified, purchase suitable mounting materials from a specialised dealer.
Never apply force during mounting. This can damage your end device or wall bracket.
If in doubt, have this product mounted by a qualified technician – do not attempt to mount it yourself!
Do not mount the product above locations where persons might linger.
Once you have mounted the product and the attached load, check that they are sufficiently secure and safe to use.
You should repeat this check at regular intervals (at least every three months).
When doing so, ensure that the product does not exceed its maximum permitted carrying capacity and that no load exceeding the maximum permitted dimensions is attached.
Make sure that the product is loaded symmetrically.
During adjustment, ensure that the product is loaded symmetrically and that the maximum permitted carrying capacity is not exceeded.
Maintain the necessary safety clearance around the attached load (depending on the model).
In the event of damage to the product, remove the attached load and stop using the product.

Intended use and specifications

The bracket is used for wall mounting flat panel displays for non-commercial, private household use.
The bracket is only intended for use within buildings.
Use the bracket only for the intended purpose.
Maximum load bearing capacity:| 30 kg
---|---
Screen size:| 25.0 – 66.0 cm (US: 10″ – 26″)
Depth:| 3.5 cm
Angle| -1504100 (depends on the device)
Wall mounting plate dimensions:| 4.5 x 8.0 cm
Mounting holes:| according to the VESA standard until 100×100

Installation requirements and installation

Note

Only mount the TV wall bracket with the help of a second person. Get the support and help you need.
Different end devices have different options for connecting cables and other devices. Before installation, ensure that the necessary connections will still be accessible after installation.
The same mounting kit is included with all of our TV wall brackets. Depending on the product and mounting type, you may not need to use the entire mounting kit. Unneeded screws and other small parts may be left over, even if the wall bracket is properly mounted. Keep these leftover parts with the operating instructions in a safe place, just in case you might need them later on (e.g. should you move, sell the product, mount the wall bracket in a different location, buy a new TV, etc)

Warning

This product is suitable for wall mounting only.
Before installing the bracket, ensure that the wall on which the television is to be mounted is suitable for the weight and make sure that no electrical wires, water, gas or other lines are located at the installation location.
Please note that the provided wall anchors are only approved for concrete and solid brick walls.
Observe the other warnings and safety instructions.
Proceed step-for-step in accordance with the illustrated installation instructions (Fig.
1 ff.).

Note

Given the multitude of terminal devices available on the market, we cannot describe all possible mounting options here.
Please ensure that the bracket lays flat and evenly on the back of the television.
Use the enclosed spacer to even out any unevenness on the back of the television.
Ensure that all screws have the proper length and can be mounted until they are hand-tight (see Fig. 7).

Setting and maintenance

Note
Only adjust the TV wall bracket with the help of a second person. Get the support and help you need.

To adjust the inclination, loosen the side mounting screws slightly, set the desired angle and retighten the screws securely.
Check that the bracket is secure and safe to use at regular intervals (at least every three months). Only use water or standard household cleaners for cleaning.

Warranty Disclaimer

Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.

Terms of waranty

HAMA GmbH & Co KG grants you an extended manufacturer’s warranty for this product that covers the freedom from defects, usability, workmanship and durability of the materials used for the specified period of 10 years. Compatibility of the product with future standards for further developed hardware is also excluded.
At the discretion of Hama GmbH & Co KG, valid warranty claims in this period will be resolved at no cost either by repair or replacement. The warranty period begins on the date of purchase of this product and is valid throughout the EU.
The warranty you are entitled to is in addition to your statutory rights and does not affect them. The warranty does not cover damage caused by improper use, normal wear and tear, exposure to chemicals, force majeure, or modifications or repairs performed by yourself or third parties. Furthermore, this warranty does not cover accessories that are not included with the product as standard (promotional parts).
In the event of a warranty claim please write to us, enclosing proof of purchase, at Hama GmbH & Co KG, Dresdner Str. 9, 86653 Monheim, Germany. You are also free to contact us at www.hama.de or by telephone on +49 (0)9091/502-0.