ergomotion 006 Adjustable Bed Instructions
- May 15, 2024
- ergomotion
Table of Contents
ergomotion 006 Adjustable Bed
Product Information
Specifications
- Model: Adjustable Bed Base Control System
- Power Supply: 3-AAA Batteries
- Remote: Wireless
- Control Box: Under-bed placement
Product Usage Instructions
Inoperable Motor
- Check if other functions of the base work properly.
- If not, switch the plugs for the head and foot actuator motor on the control box under the bed.
- Test by pressing the operating motor’s up and down buttons on the remote.
- If the inoperable motor responds, replace the control box. If not, replace the actuator motor.
Inoperable Base
- Check if the buttons on the remote light up when pressed.
- Ensure the base is plugged into a working outlet.
- Change the 3-AAA batteries or check the power supply box for illumination.
Split Setup:
If the bed base is split setup with two bases, use the remote from the
working base on the inoperable base to test the operation.
FAQ
Q: What should I do if my remote does not light up?
A: Check and change the batteries in the remote. If the issue persists,
consider replacing the remote, control box, or power supply based on further
troubleshooting steps mentioned in the manual.
Q: How can I pair my remote to a new control box?
A: Follow the specific instructions provided for your base model,
either with a Power Down Strip or a Power Down Box, as outlined in the user
manual.
Inoperable Motor
Repair Remote to Base
Bases with Power Down Strip
- Unplug the base from power source for 10 seconds.
- Plug the base back in and within 10 seconds press and hold the pairing button on the back of the remote, the light will begin to flash then become a continuous solid light. Both lights will turn off; the remote has been paired to the new control box.
Bases with Power Down Box
- Remove the back cover from the remote control. Remove and replace batteries.
- Double-click the button on the Power Down Box. The light will illuminate.
- Press and hold the button on the back of the remote. The light will begin to flash then become a continuous solid light. Both lights will turn off; the remote has been paired to the new control box.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>