hama 00091092 USB 2.0 & USB 3.0 Card Reader Instruction Manual
- June 5, 2024
- Hama
Table of Contents
**USB 2.0 &USB 3.0 CardReader
Operating Instructions
**
Thank you for choosing Hama product.
Take your time and read the following instructions and information completely.
Please keep these instructions in a safe place for future reference. If you
sell the device, please pass these operating instructions on to the new owner.
Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions or to draw your attention
to specific hazards and risks.
Note
This symbol is used to indicate additional information or important notes.
Safety Instructions
- The product is intended for private, non-commercial use only.
- Protect the product from dirt, moisture, and overheating and use it in dry rooms only.
- Do not use the product in the immediate vicinity of heaters or other heat sources or in direct sunlight.
- Do not drop the product and do not expose it to any major shocks.
- Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.
- Do not open the device or continue to operate it if it becomes damaged.
- Dispose of packaging material immediately according to locally applicable regulations.
- Do not modify the product in any way. Doing so voids the warranty.
- Keep this product, like all electrical products, out of the reach of children!
System Requirements
The CardReader supports the following operating systems:
- Windows 11 /10/8/7/Vista /XP
- Mac OS 10. x or higher
Product Features
Note
- You will find a list of the supported card formats on the packaging or at www.hama.com (enter the item number in the search).
- Please refer to the packaging or our homepage www.hama.com (enter the item number in the search) to know whether the card reader supports UHS-I, UHS-II (SD /microSD), or UDMA (CompactFlash).
- The maximum data transfer rate is achieved when both the card and the card reader support UHS-I, UHS-II, or UDMA.
- Please refer to the packaging or our homepage www.hama.com (enter the item number in the search) to know whether the card reader supports data exchange directly from memory card to memory card.
Getting started
Note –Compatibility
- USB 3.1/3.0 card readers are downward compatible with USB 2.0.
- No additional drivers are needed. The installation runs automatically.
- Plug your memory card into the appropriate slot of the CardReader.
- Connect the CardReader to an available USB port on your terminal device.
- You can now run the data transfer between your terminal device and the memory card.
Warning –Data Loss
- Ensure that the data transfer is done before you remove a memory card from your CardReader.
- Always use the eject function of your operating system before you remove the memory card from your CardReader or disconnect your CardReader (with inserted memory card) from your terminal device.
- Data loss can´t be excluded at disregarded!
- Under no circumstance does Hama GmbH &CoKGaccept liability for loss of data stored on data storage media.
Care and Maintenance
Only clean this product with a slightly damp, lint-free cloth, and do not use aggressive cleaning agents. Make sure that water does not get into the product.
Exclusion of Warranty
Hama GmbH &CoKGassumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product, or failure to observe the operating instructions and/ or safety notes.
Hama GmbH &CoKG
86652 Monheim /Germany
Service &Support
www.hama.com
+49 9091 502-0
All listed brands are trademarks of the corresponding companies. Errors and omissions excepted, and subject to technical changes. Our general terms of delivery and payment are applied.
01.2022