PaiPai PD800 Anti Tugging Dog Training Collar System Installation Guide

PaiPai PD800 Anti Tugging Dog Training Collar System

Specifications

• Product Name: Anti-Tugging Dog Training Collar System
• Package Includes: Leash, Control Handle, Collar, Probe, Rubber Probe Covers, Static Shock Tester, Charging Cord
• Leash Type: Nylon Rope Style
• Handle Type: Ergonomic Control Handle
• Battery Life: Varies based on usage

Product Usage Instructions

Leash Identification and Usage

Note: We recommend attaching the leash to the dog’s harness instead of the collar strap. Attaching the leash to the collar strap may cause discomfort or even injury to the dog. Please use it with caution.

Avoid leaving the collar on the dog’s neck for more than 18 hours per day.

Button Identification

• Power/Program: Used for turning the device on/off and switching between modes
• Vibration: Adjusts the vibration level in Manual Mode
• Static Shock: Adjusts the static shock level in Manual Mode
• Beep: Activates a beep sound as a training signal

Power On

1. Press and release the power button to turn on the device.
2. To check collar battery life, double-tap the battery icon. The number of beeps and a flashing red light indicate the battery level.

Switching Modes

1. With the device powered on, press and release the power button once to switch from Manual Mode to Auto Mode. Press again to switch back.

Auto Mode

In Auto Mode, the device automatically sends different signals based on the dog’s pulling intensity:

• Beep signal when the dog pulls 3 lbs
• Beep + Vibration signal when the dog pulls 5 lbs
• Beep + Vibration + Static Shock signal when the dog pulls 7 lbs

Note: The Manual Mode still works when the device is in Auto Mode.

Adjusting Vibration Level (Manual Mode Only)

1. In Manual Mode, press the vibration button.
2. Press the + or – button to adjust the vibration level from Level 1 to Level 9.

Adjusting Static Shock Level (Manual Mode Only)

1. In Manual Mode, press the static shock or beep button.
2. Press the + or – button to adjust the static shock level from Level 1 to Level 9.

Probe Covers and Selection

• Short Rubber Probe Covers: Used for short-haired dogs
• Long Rubber Probe Covers: Used for long-haired dogs
• Short Probes: Attach short probe covers for short-haired dogs
• Long Probes: Attach long probe covers for long-haired dogs

Tips for Training

The static shock is very mild and designed to get the dog’s attention. Always follow it with a verbal command. Begin training on Level 1 and adjust according to your dog’s size and temperament.

Charging

The USB charging port for the smart leash handle can be found on the side. The USB charging port for the collar is located on the bottom, under the rubber tab.

Static Shock Testing

Note: The leash must be in manual mode for testing.

1. Place the tester on the probes, ensuring the wires in the tester slots contact the probes.
2. Press the static shock button on the control handle.
3. The tester will light up if the static shock is working.

Collar Adjustment

Note: The collar should be adjusted to be snug but not tight around the dog’s neck. You should be able to slide one finger comfortably between the collar and your dog’s neck.

Attaching the Leash

To attach the leash to the collar and leash-handle:

Use your thumb to open the connector and place it on the collar and handle loop.

FAQ (Frequently Asked Questions)

• Q: How long does the battery last?
• A: The battery life varies based on usage. It is recommended to check the battery level regularly.
• Q: Can I use this collar with a harness?
• A: Yes, we recommend attaching the leash to the dog’s harness instead of the collar strap for better comfort and safety.
• Q: Is the static shock harmful to dogs?
• A: No, the static shock is very mild and designed to get the dog’s attention. It should always be followed by a verbal command.
• Q: How should I adjust the vibration and static shock levels?
• A: Begin training on Level 1 and adjust the levels according to your dog’s size and temperament. Gradually increase the intensity if necessary.

NOTE

• We recommend attaching the leash to the dog’s harness instead of the collar strap. Attaching the leash to the collar strap may cause discomfort or even injury to the dog. Please use it with caution.
• Avoid leaving the collar on the dog’s neck for more than 18 hours per day.
• We recommend repositioning the collar on the dog’s neck every 1 – 2 hours

Leash Identification

The Anti-Tugging Dog Training Collar Package Includes

Button Identification

Display Identification

Power On

• Double tap the” ” icon to check collar battery life:
• 5 Beeps = 100% 4 Beeps = 80% 3 Beeps = 60%
• 2 Beeps = 40% 1 Beep = 20% Red light will flash for 10 seconds indicating battery life is too low = shutting down

Switch from Manual Mode to Auto Mode

• With Power On, press and release the power button once to switch from Manual to Auto. (Press again to switch back)

Auto Mode

• The device will automatically send a “Beep” signal when the dog pulls 3 lbs.
• The device will automatically send a “Beep+Vibration” signal when the dog pulls 5 lbs.
• The device will automatically send a “Beep+Vibration+Static Shock” signal when the dog pulls 7 Ibs.
• When the device is in the Auto mode, the Manual mode still works.

Adjust the Vibration Level (Manual Mode Only)

Adjust the Static Shock Level (Manual Mode Only)

TIPS: The static shock is very mild and it wouldn’t hurt the dogs. It is designed to get their attention and should always be followed by a verbal command.
Always begin training on Level 1 and work up to a proper level under your dog’s size and temperament.

• The USB charging port for the smart leash handle can be found on the side as indicated in the photo.

• The USB charging port for the collar can be found on the bottom of the collar by lifting the rubber tab.

NOTE: The leash must be in manual mode for testing.

To test for static shock, place the tester on the probes making sure the wires in the tester slots contact the probes. Then press the static shock button on the control handle and the tester will light up.

• We are now ready to attach the leash to the collar and leash handle by using your thumb to open the connector and place it on the collar and handle loop.

NOTE: The collar should be adjusted to be snug but not tight around the dog’s neck.

• For best fit, you should be able to slide one finger comfortably between the collar and your dog’s neck.
• You are ready to begin using Smart Leash. Please visit our Instructional guides for training tips.

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>