Laserliner 4021563694211 DistanceMaster Compact Plus Instruction Manual
- June 6, 2024
- Laserliner
Table of Contents
DistanceMaster Compact Plus
Completely read through the operating instructions, the „Warranty and Additional Information“ booklet as well as the latest information under the internet link at the end of these instructions. Follow the instructions they contain. This document must be kept in a safe place and if the laser device is passed on, this document must be passed on with it.
Function / Application
Laser distance meter with color display
– For measuring length, area and volume
–Digital Connection interface to transfer the measured data
– Min/Max function for determining diagonals, verticals, and horizontals
General safety instructions
– The device must only be used in accordance with its intended purpose and
within the scope of the specifications.
– The measuring tools and accessories are not toys. Keep out of reach of
children.
– Modifications or changes to the device are not permitted, this will
otherwise invalidate the approval and safety specifications.
– Do not expose the device to mechanical stress, extreme temperatures,
moisture or significant vibration.
– The device must no longer be used if one or more of its functions fail or
the battery charge is weak.
– Please ensure compliance with the safety regulations set out by local and
national authorities with regard to the correct and proper use of the device.
Safety instructions
Using class 2 lasers
Laser radiation! Do not stare into the beam! Class 2 laser < 1 mW · 650 nm .
60825-1:2014/AC:2017
– Attention: Do not look into the direct or reflected beam.
– Do not point the laser beam towards persons.
– If a person‘s eyes are exposed to class 2 laser radiation, they should
shut their eyes and immediately move away from the beam.
– Tampering with (making changes to) the laser device is not permitted.
– Under no circumstances should optical instruments (magnifying glass,
microscope, binoculars)
Dealing with electromagnetic radiation
– The measuring device complies with electromagnetic compatibility regulations
and limits in accordance with the EMC Directive 2014/30/EU which is covered by
the Radio Equipment Directive 2014/53/EU.
– Local operating restrictions – for example, in hospitals, aircraft, petrol
stations or in the vicinity of people with pacemakers – may apply. Electronic
devices can potentially cause hazards or interference or be subject to hazards
or interference.
– The measuring accuracy may be affected when working close to high voltages
or high electromagnetic alternating fields.
Dealing with RF radiation
– The measuring device is equipped with a wireless interface.
– The measuring device complies with electromagnetic compatibility and
wireless radiation regulations and limits in accordance with the RED
2014/53/EU.
– Umarex GmbH & Co. KG hereby declares that the DistanceMaster Compact Plus
radio equipment complies with the essential requirements and other provisions
of the European Radio Equipment Directive 2014/53/EU (RED). The EU Declaration
of Conformity can be found in its entirety at the following address:
http://laserliner.com/info?an=ACG
DISPLAY:
a Measurement point (reference) rear / front
b The bar diagram shows how well suited the reflection surface is for
measurement. This is particularly useful for measuring over long distances,
dark surfaces, or bright ambient light.
c. Memory
d. Malfunction / service required
e. Digital Connection function
f. Display length / area / volume
g. Digital Conenction function activated
h. Battery symbol
I. Intermediate values / min/max values
j. Measurement values / Measurement results Unit m / ft / inch / ‘ “
k. Min/max continuous measurement
KEYPAD:
- ON / Measure / min/max continuous measurement
- length, area, volume / Digital Connection function / Memory
- Measurement point (reference) rear / front /Unit of measure m / ft / inch / ‘ “ /enable Digital Connection function
- OFF / delete last measurement values
Inserting batteries (see Fig. A)
Open the battery compartment and insert batteries according to the symbols. Be
sure to pay attention to polarity.
Switch on, measure, and switch off: Change unit of measure: m / ft/inch
/ ‘ “ Delete the last measured value:
Change measurement point (reference):
Change measurement function: Length measurement:
Area measurement:
Volume measurement: min/max continuous measurement:
The LC display shows the max value, the min value, and the current value.
Data transfer
This device has digital connectivity which allows wireless data transfer to
mobile devices such as smartphones or tablets with a wireless interface. The
system prerequisites for a digital connection are specified at
http://laserliner.com/info?an=ble This device can generate a wireless
connection to devices that are compatible with the wireless standard IEEE
802.15.4. The wireless standard IEEE 802.15.4 is a transfer protocol for
Wireless Personal Area
Networks (WPAN). The range is set to a maximum distance of 10 m from the
terminal device and greatly depends on the ambient conditions such as the
thickness and composition of walls, sources of interference as well as the
transmit/receive properties of the terminal device.
Enable / disable Digital Connection:
The digital connection is activated as soon as the device is switched on as
the wireless system is designed to use very little electricity.
Application (app)
An app is required to use a digital connection. You can download the app from
the corresponding stores for the specific type of terminal device:
http://videos.press-and-test.de/Dmc_Portal_de/
Make sure that the wireless interface of the mobile device is activated.
After starting the app and activating the digital connection, a connection can
be set up between a mobile device and the measuring device.
If the app detects several active measuring devices, select the matching
device.
This measuring device can be connected automatically the next time it is
switched on.
Memory function:
Error codes:
Err101: Replace the battery
Err104:Calculation error
Err152:Temperature is too high: > 40°C
Err153:Temperature is too low: < 0°C
Err154:Outside the measuring range
Err155:Received signal too weak
Err156:Received signal too strong
Err157: Incorrect measurement or background is too bright
Err160:The device is moving too much to measure.
Important notices
– The laser points to the location that will be measured. No objects may get
into the laser‘s line of measurement.
– The device compensates for the measurement for different room temperatures.
Therefore allow the device a brief adaptation period when changing locations
with large temperature differences.
– The device is only conditionally useable in outdoor areas and cannot be used
in strong sunlight.
– The measurement results of outdoor measurements may be influenced or
falsified by rain, fog, and snow.
– In unfavorable conditions, e.g. with poorly reflecting surfaces, the maximum
deviation may be greater than 3 mm.
– Carpeting, upholstery, or curtains will not reflect the laser optimally.
Measure to flat surfaces.
– Measurements made through glass (window panes) can falsify measurement
results.
– An energy-saving function switches the device off automatically.
– Clean with a soft cloth. Water may not be allowed to penetrate the housing.
Information on maintenance and care
Clean all components with a damp cloth and do not use cleaning agents,
scouring agents, and solvents. Remove the battery(ies) before storing it for
longer periods. Store the device in a clean and dry place.
Calibration
The meter needs to be calibrated and tested on a regular basis to ensure it
produces accurate measurement results. We recommend carrying out calibration
once a year.
Technical data
(Subject to technical changes without notice. Rev21W32)
Precision (typical)* | ± 2 mm |
---|---|
Measurement range (inside)** | 0,1 m – 40 m |
Laser class | 2 / < 1 mW (EN 60825-1:2014/AC:2017) |
Laser wavelength | 650 nm |
Operating conditions | -10°C … 40°C, max. humidity 80% RH, no condensation, |
max. working altitude 2000 m above sea level
Storage conditions| -20°C … 70°C, max. humidity 80% RH
Radio module operating data| IEEE 802.15.4. LE 4. x (Digital Connection)
interface; Frequency band: ISM band 2400-2483.5 MHz, 40 channels;
Transmission power: max. 10 mW;
Bandwidth: 2 MHz; Bit rate: 1 Mbit/s; Modulation: GFSK/FHSS
Automatic switch-off| 30-sec laser / 10 min device
Power supply| 2 x 1.5V LRO3 (AAA)
Dimensions (W x H x D)| 43 x 110 x 27 mm
Weight| 100 g (incl. batteries)
Measuring distance up to 10 m with strongly reflective target surface and at
room temperature.
The measurement deviation may increase by ± 0.2 mm/m for greater distances and
under unfavorable measuring conditions such as strong sunlight or weakly
reflective target surfaces. at max. 5000 lux
EU directives and disposal
This device complies with all necessary standards for the free movement of
goods within the EU. This product is an electric device and must be collected
separately for disposal according to the European Directive on waste
electrical and electronic equipment. Further safety and supplementary notices
at:
http://laserliner.com/info?an=ACG
DistanceMaster Compact Plus**
SERVICE
Umarex GmbH & Co. KG
– Laserliner –
Möhnestraße 149, 59755 Arnsberg, Germany
Tel.: +49 2932 638-300, Fax: +49 2932 638-333
info@laserliner.com
Umarex GmbH & Co. KG
Donnerfeld 2
59757 Arnsberg, Germany
Tel.: +49 2932 638-300, Fax: -333
www.laserliner.com