HoMEDiCS ST300 Drift Sandscape Instruction Manual
- June 6, 2024
- Homedics
Table of Contents
HoMEDiCS ST300 Drift Sandscape
PLEASE TAKE A MOMENT NOW REGISTER YOUR PRODUCT
AT:www.homedics.com/register
Your valuable input regarding this product will help us create the products
you will want in the future.
IB-SANDTABLE L-02337, REV 1
IMPORTANT SAFETY INSTRUCTIONS
WHEN USING ELECTRICAL PRODUCTS, ESPECIALLY WHEN CHILDREN ARE PRESENT, BASIC
SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED, INCLUDING THE FOLLOWING:
READ ALL INSTRUCTIONS BEFORE USING.
DANGER
TO REDUCE THE RISK OF ELECTRIC SHOCK:
- Always unplug the appliance from the electrical outlet immediately after using and before cleaning.
- DO NOT reach for an appliance that has fallen into the water. Unplug it immediately.
WHAT COMES IN THE BOX
- 1 x drift Bowl
- 1 x Glass Top
- 1 x Metal Sphere
- 2 x Bags of Sand (1 bag for 16″, 2 bags for 21″)
- 1 x Sand Rake Tool
- 1 x Adapter Power Cord
BUTTONS
-
Power Button
• Short press play/pause ball
• Long press lights and ball off -
Light Button
• Short press cycles through saved colors
• Long press lights on/off -
Power Port
SET UP
-
Remove all protective materials over the felt surface inside your drift bowl. Pour one bag of sand into the center of the table and use the included sand rake to level the sand (does not need to be perfect).
-
Place the metal ball into the center of the table; it will find the magnet. If it does not find the magnet right away, the magnet will find the ball during the first design.
-
Place the glass foam side down on the top and center it.
-
Untie the power cord, connect the cord to the adapter, and insert
the barrel jack into the back of the drift Sandscape. Then plug in the 3-prong adapter plug to a 120-volt household electrical outlet. The lights will illuminate. -
Download the drift Sandscape App from the app store. 6. Follow the instructions within the app for set up and get ready to drift.
MAINTENANCE
- Even out the sand. Over time, sand may build up on the outside of the sand surface. You can just use the included sand rake or any flat card to redistribute sand as needed.
- You can clean the glass surface with any glass cleaner.
- The product is built to give you 8 hours of continuous use. If it has stopped and you want to drift longer, restart in the app or short press the power button on the back of the unit.
FCC DISCLAIMER
This device complies with Part 15 of the FCC Rules and Industry Canada
licence-exempt RSS standard(s). Operation is subject to the following 2
conditions: (1) This device may not cause harmful interference, and (2) This
device must accept any interference received, including interference that may
cause undesired operation.
NOTE: HoMedics is not responsible for any radio or TV interference caused
by unauthorized modifications to this equipment. Such modifications could void
the user authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules and CAN
ICES-3 (B)/ NMB-3 (B). These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This product has been tested and complies with the requirements for Federal Communication Commission, Part 15, and CAN ICES-3/NMB-3. Although this product is tested and complies with FCC, it may interfere with other devices. If this product is found to interfere with another device, separate the other device and this product. Conduct only the user maintenance found in this instruction manual. Other maintenance and servicing may cause harmful interference and can void the required FCC compliance.
FCC & IC RADIATION EXPOSURE STATEMENT
This equipment complies with FCC and Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
SUPPLIER’S DECLARATION OF CONFORMITY
Product Description: SANDSCAPE
Model Number: ST-300, ST-400
Trade Name: HoMedics
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation.
U.S. Contact Information
Company: HoMedics, LLC.
Address: 3000 N Pontiac Trail, Commerce Township, MI 48390
8:30am-7:00pm EST Monday-Friday
1-800-466-3342
1-YEAR LIMITED WARRANTY
HoMedics sells its products with the intent that they are free of defects in
manufacture and workmanship for a period of 1 year from the date of original
purchase, except as noted below. HoMedics warrants that its products will be
free of defects in material and workmanship under normal use and service. This
warranty extends only to consumers and does not extend to Retailers.
To obtain warranty service on your HoMedics product, contact a Consumer
Relations representative for assistance. Please make sure to have the model
number of the product available.
HoMedics does not authorize anyone, including but not limited to Retailers, the subsequent consumer purchaser of the product from a Retailer, or remote purchasers, to obligate HoMedics in any way beyond the terms set forth herein. This warranty does not cover damage caused by misuse or abuse; accident; the attachment of any unauthorized accessory; alteration to the product; improper installation; unauthorized repairs or modifications; improper use of electrical/power supply; loss of power; dropped product; malfunction or damage of an operating part from a failure to provide manufacturer’s recommended maintenance; transportation damage; theft; neglect; vandalism; or environmental conditions; loss of use during the period the product is at a repair facility or otherwise awaiting parts or repair; or any other conditions whatsoever that are beyond the control of HoMedics.
This warranty is effective only if the product is purchased and operated in
the country in which the product is purchased. A product that requires
modifications or adoption to enable it to operate in any other country than
the country for which it was designed, manufactured, approved, and/or
authorized, or repair of products damaged by these modifications is not
covered under this warranty.
THE WARRANTY PROVIDED HEREIN SHALL BE THE SOLE AND EXCLUSIVE WARRANTY. THERE
SHALL BE NO OTHER WARRANTIES EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR FITNESS OR ANY OTHER OBLIGATION ON THE PART OF
THE COMPANY WITH RESPECT TO PRODUCTS COVERED BY THIS WARRANTY. HOMEDICS SHALL
HAVE NO LIABILITY FOR ANY INCIDENTAL, CONSEQUENTIAL, OR SPECIAL DAMAGES. IN NO
EVENT SHALL THIS WARRANTY REQUIRE MORE THAN THE REPAIR OR REPLACEMENT OF ANY
PART OR PARTS THAT ARE FOUND TO BE DEFECTIVE WITHIN THE EFFECTIVE PERIOD OF
THE WARRANTY. NO REFUNDS WILL BE GIVEN. IF REPLACEMENT PARTS FOR DEFECTIVE
MATERIALS ARE NOT AVAILABLE, HOMEDICS RESERVES THE RIGHT TO MAKE PRODUCT
SUBSTITUTIONS IN LIEU OF REPAIR OR REPLACEMENT.
This warranty does not extend to the purchase of opened, used, repaired,
repackaged, and/or resealed products, including but not limited to the sale of
such products on internet auction sites and/or sales of such products by
surplus or bulk resellers. Any and all warranties or guarantees shall
immediately cease and terminate as to any products or parts thereof that are
repaired, replaced, altered, or modified, without the prior express and
written consent of HoMedics.
This warranty provides you with specific legal rights. You may have additional
rights that may vary from country to country. Because of individual country
regulations, some of the above limitations and exclusions may not apply to
you.
For more information regarding our product line in the USA, please visit
www.homedics.com.
For Canada, please visit www.homedics.ca.
FOR SERVICE IN THE USA
cservice@homedics.com
8:30 am 7:00pm EST Monday-Friday
1-800-466-3342
FOR SERVICE IN CANADA
cservice@homedicsgroup.ca
8:30 am 5:00pm EST Monday-Friday
1-888-225-7378
©2021 HoMedics, LLC. All rights reserved. HoMedics is a registered trademark
of HoMedics, LLC. The Bluetooth® word mark and logo are registered trademarks
owned by Bluetooth SIG, Inc, and any use of such marks by HoMedics is under
license.
Distributed by HoMedics, LLC, 3000 N Pontiac Trail, Commerce Township, MI
48390 IB-SAND TABLE
Made in China
FAQS
Why is the product louder at full speed?
The higher speed is intended to quickly clear or find a specific design. It is recommended to use the product below 50% speed for optimal silence.
The ball moves slowly in the center. Is this normal?
Yes. The product is designed to maintain intricate designs even when the ball is moving in the center.
How do I stop the sand from bunching up around the outside over time?
Occasionally, you may feel the need to pause the product, remove the metal ball, and level the sand.
Can I use other materials or sand?
We only recommend using the drifting sand included with the landscape. This sand can also be purchased at homedics.com.
How do I reattach my metal ball to the magnet?
Put the ball in the middle of the table and choose the “clean” design. This will pull the magnet under the table to the center and should reconnect with the ball.
To rest my product, do I pull the plug out of the wall or do I need to do something within the app?
Long press the power button or press the power button within the app.
Why does my product stop midway through my playlist?
Make sure that your phone is close enough to the table when choosing a new playlist to allow the new playlist to fully download.
What happens when I am outside of Bluetooth® range? Will my drift still work?
Your drift will continue running the playlist or current design. Depending on your settings, it will either stop or continue with the next design.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>