Voger VM300 Video Baby Monitor User Manual

Voger VM300 Video Baby Monitor User Manual

A Attention

Thank you for purchasing Vogler Video Baby Monitor VM300. Now you can see and hear your baby sleeping in the other room or you can monitor your elder kids in their playroom. Before you use the device, please read this EN User Manual carefully.

• This product should be assembled by adults.
• Keep small parts away from children when assembling.
• This product is not a toy, do not allow children to play with it as a toy.
• This baby monitor is not a substitute for responsible adult supervision.
• Do not place the baby monitor cables in the cot or with the baby arm’s reach (at least 1 meter away).
• Keep the cords out of reach of children.
• Do not use the baby monitor near water or a heat source.
• Only use the power adapters provided.
• Do not touch the power plug with sharp or metal objects.

Package Content

Product Introduction

Overview of your Parent Unit

1. LCD Display
2. Menu Button / OK Button
3. Power Indicator light
4. Vox Indicator light
5. Push to talk Button
6. Volume + Button / Up Button 7
7. Return Button
8. Music control Button
9. Volume-Button / Down Button
10. Microphone
11. Speaker
12. Power Button
13. Charging Interface

Overview of your baby unit

1. Light Sensor
2. Camera Lens
3. Infrared LED
4. Microphone
5. Power LED
6. Speaker
7. Pair Button
8. Power interface
9. Temperature Sensor

Product Introduction

1. Baby unit installation (1) Place the baby unit in a convenient location (e.g. on a table) and point the camera lens towards the area you want to monitor. Adjust the baby unit until you are satisfied with the image in the parent unit.
2. To mount the baby unit on the wall Use the template below to mark the wall in the correct places to drill holes for wall-mounting screws. Insert 4mm head screws (not supplied) into the holes and tighten the screws. Then, align your baby unit with the screws and push it down.
   

NOTE: Do not place the baby unit within baby’s reach! If there is interference on the picture or sound, try moving the units to different location, and ensure they are not close to other electronic equipment.

2. Charging and Power On/Off

1. Baby unit power supply Connect the small plug of the power adapter to the baby unit and the other end to the mains socket.
   The green LED light indicates that the baby unit is on working. Parent unit power supply Connect the plug of the power adapter to the parent unit and the other end to the mains socket. Please fully charge the parent unit before use, so that it could continue working without connecting to the power socket. The LCD screen illuminates and starts up automatically after a Few seconds.

2. Power On/Off

Press and hold the power button at least 3 seconds to turn on the parent unit, then two units will be connected automatically.

Product function introduction

1.  LCD display icon introduction Signal strength indicator 2 Temperature of the baby’s room (1) Date and time ® Battery indicator 6 Alarm activated
2. Night vision function The baby unit has 1 high-intensity infrared LED for picking up clear images in the darkness.
3. Music player Press and hold the Music button at least 3 seconds will turn on the music player and play lullaby, through the baby unit, long press the button for 3 seconds again will turn off it.
4. Intercom Function Press and hold the Push to talk button on the parent unit to talk to your baby through the baby unit loudflspeaker.
5. Volume adjustment When the video is playing, press the Volume — Button to decrease volume or Volume + Button to increase volume, the display will show the current volume for S seconds.
6. Reset. the Patent_ Will. Press and hold the power button at least 3 seconds, the parent unit will be Forced to restart.

product Menu introduction

1. Main menu
   Press Menu Button at monitor screen will enter the main menu, it contains 4 items. a. Camera b. Alarm c. Settings d. Languages You can press the UP/Down Button to move the cursor to select an item and press Menu Button will enter the sub• menu which you selected. Press the Return Button back to main menu.

2. Pairing camera
   The enclosed baby unit has already registered, you do not need to register it again unless the baby unit loses its link with parent unit.
   Otherwise, you just restart the parent unit, and the press the Pair Button back of the Baby Unit, then they will re-connect.

3. . Alarm clock
   Press UP/DOWN Button to choose ON or OFF, press Music Button to change the Value. Press Music Button to choose item, press UP/ DOWN Button to change the setting.

4 . Settings
a. Time and date b. Temperature unit Switch the unit to Celsius of Fahrenheit. c. Anti-flicked You are able to adjust the Frequency of 50/60Hz to suit your lighting for anti-flicker.

d. Mode setting Norma( mode/voY Mode
e. VOX sensitivity setting Low/Medium/High
f. LCD backlight brightness adjustment Press the UP Button to adjust the brightness of the LCD you are viewing and the LCD backlight active time in the menu operation.

Language setting
Choose your language from the following: English French Spanish Portuguese Italian German Turkish Russian
All Vogler products come with a limited warranty of 12 months From the date of purchase. And we have professional customer service team for your support as soon as we can. If you have any questions or confusions about our product or warranty, please feel Free to contact us. We will do our best to help you solve the problem until you are satisfied. Customer Service Mailbox: support@vogerhome.com

FCC Statementl

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Conned the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radiorn/ technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information

For One Parent Unit The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
For One Baby Unit This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>