CITYSPORTS Hoverkart Self-Balancing Scooter User Manual

CITYSPORTS Hoverkart Self-Balancing Scooter

Safety Guide

1. This product is based on the self-balancing scooter. And the speed limit is 12KM/H. Please slow down before hearing the alarm sound.

2. For yours and others’ safety, please don’t either accelerate the kart kit to high speed suddenly or stop suddenly.

3. The safety speed is 10KM/H. When the speed is over 12km/h, the kart kit will be out of control for 0.3-0.5s and user can’t apply the brakes immediately.
   So please do not ride it at the limit speed, otherwise there may be injury or property loss.

4. The MAX load of this kart kit is 100kg.

5. People less than 12 year-old and over 60 year-old are not allowed to use the kart kit.

6. Please do not ride this kart kit at rainy days or on wet ground.

7. Please do not ride on a slope (over 15°).

8. This device is only for entertainment. Please follow local laws and regulations.

9. Please do not ride it in crowded place.

10. Teenagers are not allowed to ride the kart kit without adult companion.

It will take you a couple of minutes to control this kart kit. Please be careful if you are a starter.
If you do not follow the safety guide, it may cause rider or a third party physical injury or property loss. We are responsible for the product’s quality. If any physical injury or property loss is caused by wrong operation, we won’t be held responsible.

Operation Instructions

1. Pushing forward both left and right handle makes the Kart Kit go forward.
2. Pulling back both left and right handle makes the Kart Kit go backward.
3. Pull back left handle, the kart kit will turn left.
4. Pull back right handle, the kart kit will turn right.

(Note: Before switching it on, adjust the handles to make sure scooter at horizontal level, to avoid fast moving forward once it turns on. Before switching it off, lift the kart to make scooter in state of no burden, then turn it off).

BOX CONTENT

Assembly Illustration

1. Mount the handles on the frame on both sides with the nuts A and bolts B.
   

2. Now fasten the adjustment knob into the frame and feet frame.
   

3. Mount the seat on the frame.
   

4. Place the Kart kit on your HOVERBOARD.
   

5. Use the sliding metal plate to align the frame to the correct size for your Hoverboard. Fasten the nut tight.
   

6. Now pull the Velcro tight.
   

7. Your kart is ready for use.
   

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>