Topsail 115B Bluetooth Speaker Instruction Manual
- June 6, 2024
- Topsail
Table of Contents
Topsail 115B Bluetooth Speaker
Thanks for buying this product
This is a swimming pool Bluetooth speaker, can be used in the swimming pool
and bathtub. Please read and keep well this instruction manual.
Product Specifications
- Model：115B
- Lithium Battery：3.7V / 200mAh
- Playtime: about 3-4h
- Charging time: About 2h
- DC input: DC3.7V / 150mA
- Working Temperature: -5 ℃O + 40℃
- Bluetooth Distance: About 10m
- Bluetooth version: V5.0
Power
- Long press the on/off button for 3seconds and the speaker will turn on.
- The unit should come with enough phone to be powered on. If you are having trouble on pairing or powering-on it, please make sure it is fully charged.
- Use the USB charge cable connecting to the item from its micro charging socket to your computer or charger. The charging input power is 5V 500mah.
- The red light will turn off when power charging completes.
Bluetooth Mode
- Once power on, the item turns default into Bluetooth Mode, while there is no other connection.
- The item will automatically connect to the last Bluetooth device first. If not found, it will search a new one.
- On the Bluetooth device, switch on Bluetooth setting and search for “115B”. For the first-time connection, select “115B” to start connection. If necessary, enter the pass code 0000 or 1234.
- To disconnect the item from current Bluetooth device, switch off Bluetooth from current Bluetooth device.
- Once connected, you can listen to music from the unit wirelessly (< 33 ft.). The music streaming may be interrupted by obstacles between the device and the item, such as walls, metallic casing that covers the device, or other devices nearby that operate in the same frequency.
FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference,
- this device must accept any interference received, including interference that may cause undesired operation
This device has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This device generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this device does cause harmful interference to
radio or television reception, which can be determined by turning the device
off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the device and receiver.
- Connect the device into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment